Vibration analysis of five layer composite plate at different boundary conditions
-
2015-01-03 https://doi.org/10.14419/ijsw.v3i1.3973 -
Composite Plate, Vibration Analysis, Finite Element Methods, Isotropic Plate, Boundary Conditions Etc. -
Abstract
Generally plates are subjected to the load conditions which may change by fixing different edges of the plate,that cause deflections transverse to the plate.In this paper a Vibration Analysis of a five layer composite plate is presented at different boundary condition. Vibration is the most influencing parameter of life & performance of particular machine element or engineering structures, and invariably, damping is used to reduce that. Various types of damping mechanisms have been developed over time to control the undesired vibration of structures. A composite plate having five layers is modeled in ANSYS parametric Design Language (APDL) platform & Finite element procedure is followed. Then, a set of results are presented to show the applicability of the present problem to various types of boundary conditions under free vibration conditions. Subsequently the results are compared with isotropic plate.
-
References
[1] J. C. Ezeh1, O. M. Ibearugbulem2, K. O. Njoku3, L. O. Ettu, "Dynamic Analysis of Isotropic SSSS Plate Using Taylor Series", International Journal of Emerging Technology and Advanced Engineering, Volume 3, Issue 5, (2013), pp 60-67.
[2] Timoshenko S.P. and Goodier J.N. (1970).Theory of Elasticity (3rd Ed.) (pp.1 - pp.71).N.Y.:McGraw-Hill.
[3] Szilard, Rudolph, (1921).Theory and analysis of plates: classical and numerical methods.
[4] Sokolnikoff, I.S. (1956).Mathematical Theory of Elasticity (2nd Ed.). N.Y.: McGraw-Hill.
[5] S. Nomura and B. P. Wang, Free vibration of plate by integral method Computers & Structures, Volume 32, Issue 1, 1989, Pages 245-247 http://dx.doi.org/10.1016/0045-7949(89)90090-4.
[6] Wolfram, Stephen (1988). Mathematica: A System for Doing Mathematics by Computer. Redwood City, CA. Addison-Wesley.
[7] J. N. Reddy, "An Introduction to the Finite Element Method," New York: McGraw-Hill, 1993.
[8] Mohammed Sh. Mahmod, "finite Element Analysis Of Shear Deficient Large Size Reinforced Concrete Beams, Diyala Journal of Enginering Sciences, Vol. 03, No. 02, p. 1-15, December 2010.
[9] O. O. Ochoa, J. N. Reddy, "Finite Element Analysis of Composite Laminates," Boston: Kluwer Academic Publishers, 1992. http://dx.doi.org/10.1007/978-94-015-7995-7.
[10] K. Kalita, A. Dutta. "Free Vibration Analysis of Isotropic and Composite Plate." International Journal of Mechanical Engineering and Research. Vol. 3, No. 4. ISSN 2249-001.
[11] S. P. Timoshenko and J. M. Gere 'Theory of Elastic Stability' McGrraw-Hill International, NewYork. 2nd Edition 1963.
[12] S. P. Timoshenko and S Woinowsky-Kriegers McGrraw-Hill International, New York .2nd Edition 1965.
[13] Sasank Sekhar Hota, Payodhar Padhi, 'Vibration of plates with arbitrary shapes of cutouts'Journal of Sound and Vibration 302, 1030-1036, 2007 http://dx.doi.org/10.1016/j.jsv.2007.01.003.
[14] Mcpherson, 'Normal pressure test of circular plates with clamped edge' Naca report-744, 1942.
[15] T E. Wilt, A. F. Saleeb and T. Y. Chang,'A mixed element for laminates plates and shells', Computers and structures, 37(4), 597-611, 1990 http://dx.doi.org/10.1016/0045-7949(90)90048-7.
[16] C.S. Huang, A.W. Leissa, S.C. Liao' Vibration analysis of rectangular plates with edge V-notches', International Journal of Mechanical Sciences 50, 1255- 1262, 2008, 46.
[17] R. D. Mindlin 'Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates', Journal of Applied Mechanics American Society of Mechanical Engineers 18, 31-38, 1951.
[18] W. Leissa 'The free vibration of rectangular plates',Journal of Sound and Vibration 31,257-293, 1973 http://dx.doi.org/10.1016/S0022-460X(73)80371-2.
[19] K.M. Liew, Y. Xiang and S. Kitipornchai 'Transverse vibration of thick rectangular plates-1: comprehensive sets of boundary conditions' Computers and Structures 49, 1-29 1993 http://dx.doi.org/10.1016/0045-7949(93)90122-T.
[20] K.M. Liew, S. Kitipornchai, A.Y.T. Leung,C.W. Lim 'Analysis of the free vibration of rectangular plates with central cut-outs using the discrete Ritz method', International Journal of Mechanical Sciences 45,941-959,2003 http://dx.doi.org/10.1016/S0020-7403(03)00109-7.
[21] H. L.Lee, S. P. Lim and S. T. Chow 'Prediction of natural frequencies of rectangular plates with rectangular cutouts' Computers and Structures 36, 861-869, 1990 http://dx.doi.org/10.1016/0045-7949(90)90157-W.
[22] P.L.Vemiere de Irassar,G.M. Ficcadenti, P.A.A. Laura,' Transverse vibrations of rectangular orthotropic plates with the edges elastically restrained against rotation and a free, straight corner cut-out', Fibre Science and Technology, 16, 247-259, 1982 http://dx.doi.org/10.1016/0015-0568(82)90047-1.
[23] Shufrin and M. Eisenberger, ' Vibration of shear deformable plates with 24 variable thickness -first-order and higher-order analyses', Journal of Sound and Vibration, 290,465-489,2006. http://dx.doi.org/10.1016/j.jsv.2005.04.003.
[24] Sang Wook Kang and Sang-Hyun Kim, 'Variation analysis of simply supported rectangular plates with uni directionally arbitrarily varying thickness', Journal of Sound and Vibration, 312, 551-562,2008. http://dx.doi.org/10.1016/j.jsv.2007.12.032.
[25] Sang Wook Kang and Sang-Hyun Kim, 'Variation analysis of simply supported rectangular plates with uni directionally arbitrarily varying thickness', Journal of Sound and Vibration, 312, 551-562,2008. http://dx.doi.org/10.1016/j.jsv.2007.12.032.
[26] M. Huang, X. Q. Ma, T. Sakiyama, H.Matuda and C. Morita,'Free vibration analysis of orthotropic rectangular plates with variable thickness and general boundary conditions', Journal of Sound and Vibration, 228, 931-955, 2005 http://dx.doi.org/10.1016/j.jsv.2005.01.052.
-
Downloads
-
How to Cite
Patil, D., Damle, P., & Shinde, D. (2015). Vibration analysis of five layer composite plate at different boundary conditions. International Journal of Scientific World, 3(1), 12-17. https://doi.org/10.14419/ijsw.v3i1.3973Received date: 2014-12-04
Accepted date: 2014-12-29
Published date: 2015-01-03