Design and analysis of square shaped serrated patch antenna for ultra-wideband applications with single rejection band

  • Authors

    • P Saleem Akram
    • B T P Madhav
    • G Jeevana Sravya
    • V Sudhakar
    • G Lakshmi Sirisha
    • Ch Mounika
    • M Venkateswara Rao
    2017-12-21
    https://doi.org/10.14419/ijet.v7i1.1.10160
  • Serrated patch, ultrawideband(UWB), HFSS 13.

  • This article studies about the design and analysis of serrated patch antenna with a slot at the ground with microstrip line feed. Comparative analysis has been carried in five and ten serrated patches at top and side edges of the square patch. All design iterations have been carried out using commercially equipped tool HFSS 13. For bandwidth enhancement a slot has been placed at the ground in all iterations in common, later the return loss and gain have been analyzed and compared for all models. Finally, the proposed modal consists of ten serrations at the three edges of the square patch where it works on the ultrawide band region with high gain when compared to all models. The proposed antenna has its applications at WiMAX, WLAN 802.11, LTE 42/43 bands and works in the region of ultrawide band(3.1GHz-10.6GHz).and having rejection at 5-6GHz

  • References

    1. [1] Liu, L., Cheung, S. W., & Yuk, T. I. (2011). Bandwidth improvements using ground slots for compact UWB microstrip-fed antennas. In Progress in Electromagnetics Research Symposium. Electromagnetics Academy. The Journal's web site is located at http://www. piers. org/piers proceedings/.

      [2] Babu, M. R., Sarat, K. K., & Madhav, B. T. P. (2016). Compact serrated notch band MIMO antenna for UWB applications. ARPN Journal of Engineering and Applied Sciences, 11, 4358-4369.

      [3] Azim, R., Islam, M. T., Misran, N., Cheung, S. W., & Yamada, Y. (2011). Planar UWB antenna with multiâ€slotted ground plane. Microwave and Optical Technology Letters, 53(5), 966-968.

      [4] Bhavani, K. V. L., Khan, H., Rao, D. S., Madhav, B. T. P., Reddy, V. R., Monika, M., & Chand, Y. D. (2016). DUAL BAND NOTCHED PLANAR PRINTED ANTENNA WITH SERRATED DEFECTED GROUND STRUCTURE. Journal of Theoretical & Applied Information Technology, 88(1).

      [5] Ojaroudi, M., Kohneshahri, G., & Noory, J. (2009). Small modified monopole antenna for UWB application. IET microwaves, antennas & propagation, 3(5), 863-869.

      [6] Zaker, R., & Abdipour, A. (2010). A very compact ultrawideband printed omnidirectional monopole antenna. IEEE Antennas and wireless propagation letters, 9, 471-473.

      [7] Lee, K. F., & Luk, K. M. (2011). Microstrip patch antennas. World Scientific.

      [8] Pozar, D. M., & Schaubert, D. H. (Eds.). (1995). Microstrip antennas: the analysis and design of microstrip antennas and arrays. John Wiley & Sons.

      [9] Bahl, I., Bhartia, P., & Stuchly, S. (1982). Design of microstrip antennas covered with a dielectric layer. IEEE Transactions on Antennas and Propagation, 30(2), 314-318.

      [10] Khanna, A., & Srivastava, D. K. (2014). Serrated edged microstrip patch antenna using N-shaped slot for WLAN/WiMAX/Bluetooth applications. Int. J. Res. Sci. Eng, 3(7), 330-336.

      [11] Cung, G., Huff, G. H., & Bernhard, J. T. (2003). Ground plane edge serrations for improved performance of microstrip active reflectarray elements. IEEE antennas and wireless propagation letters, 2(1), 334-336.

  • Downloads

  • How to Cite

    Saleem Akram, P., T P Madhav, B., Jeevana Sravya, G., Sudhakar, V., Lakshmi Sirisha, G., Mounika, C., & Venkateswara Rao, M. (2017). Design and analysis of square shaped serrated patch antenna for ultra-wideband applications with single rejection band. International Journal of Engineering & Technology, 7(1.1), 525-529. https://doi.org/10.14419/ijet.v7i1.1.10160