Reduction of cost in castings by the method of radiographic test

  • Authors

    • T Soundharya
    • N V. Dhandapani
    2018-03-19
    https://doi.org/10.14419/ijet.v7i2.8.10433
  • Casting Defects, Radiographic Test, Cost Reduction, Total Quality Management Techniques.
  • Foundry in developing nations endures from low quality and low output due to the incidence of defects that may occupy single or multiple causes. Hence casting is a process of uncertainty. It is not an easy task, since casting is a complex process and has connections among various process and operations. Casting defects can negatively impact the bottom line of a foundry. Here an attempt is made cost cutback of castings in radiographic test. There are many defects which can be identified through radiographic test and these defects are reduced or remedied by means of welding. This study focuses about the cost reduction of castings by means of “Total quality management toolsâ€.

  • References

    1. [1] Rajesh Rajkolhe1, J. G. Khan2.Defects, Causes and Their Remedies in Casting Process. Vol.2, No.3, E-ISSN: 2321-9637, March 2014.

      [2] M. Choudhari, , B. E. Narkhede, S. K. Mahajan, Modeling and simulation with experimenta validation of Temperature distribution during solidification process in sand cast.

      [3] Sunil Chaudhari and Hemant Thakkar “Review on Analysis of Foundry Defects for Quality Improvement of Sand Castingâ€International Journal of Engineering Research and Applications Vol. 4 Issue 3 (March 2014).

      [4] P.N. Rao (2000), Manufacturing Technology – Foundry, Forming and Welding Tata McGraw-Hill Publishing Company Ltd.,New Delhi.

      [5] Achamyeleh A. Kassie and Samuel B. Assfaw “Minimization of Casting Defects†IOSR Journal of Engineering Vol. 3, Issue 5,May 2013.

      [6] Prof B.R. Jadhav, Santosh J Jadhav, “Investigation and Analysis of Cold Shut Casting Defect and Defect Reduction By Using 7 Quality Control Toolsâ€, International Journal of Advanced Engineering Research and Studies.

      [7] Rallabandi srinivasu1, g. Satyanarayanareddy 2, srikanthreddyrikkula International Journal of Reviews in Computing , utility of quality control tools and process control to improve the Productivity and quality in an industry. ISSN: 2076-3328, 2009.

      [8] K.Siekanski,S.Borkowaski “Analysis of foundry defects and preventive activities for quality improvement of casting †Metalurgija- 42 ,2003.

  • Downloads

  • How to Cite

    Soundharya, T., & V. Dhandapani, N. (2018). Reduction of cost in castings by the method of radiographic test. International Journal of Engineering & Technology, 7(2.8), 320-325. https://doi.org/10.14419/ijet.v7i2.8.10433