Microstrip line Antenna Fabrication Material

  • Authors

    • Vimlesh Singh
    • Priyanka Bansal
    • P K.Singhal
    2018-03-19
    https://doi.org/10.14419/ijet.v7i2.8.10437
  • Material, Electromagnetic, Microwave, Dielectric

  • Abstract

    This paper presents an extensive survey of electromagnetic materials used for antenna fabrication, which find application in Civilian life as well as defense life. When a densely packed microwave integrated circuit is designed, it requires protection from higher power transient because of specific polarization and frequency response. To meet specification of such kind of microwave circuits it is desired to exploit properties of fabricating materials, which are not found in nature but can be prepared with specific proportion of chemical element combination. This study provides in-depth responses of materials toward electromagnetic wave's characteristics such as dielectric, flexible electronics, electrical and thermal properties, which have vast potential in communication engineering.

  • References

    1. [1] Ramesh Garg, Prakash Bartia, InderBahl and ApisakIttipiboon , “Microstrip Antenna Design Handbook’’, Artech House Inc. Norwood, MA, pp. 168, 253-316, 759-767, 2001.

      [2] Panoutsopoulos, B., “Printed circuit fractal antennasâ€, presented in Consumer Electronics, 2003, ICCE-2003 IEEE International Conference on , pp. 288 – 289, 2003.

      [3] Douglas J. Kern, Douglas H. Werner,AgostinoMonorchio, Luigi Lanuzza, and Michael J.Wilhelm, “The Design Synthesis of Multiband Artificial Magnetic Conductors Using High Impedance Frequency Selective Surfaces†IEEE Transactions Antennas and Propagation, Vol.53, No.1, pp. 8-17, 2005.

      [4] Leila Yousefi and Omar M. Ramahi, “Experimental Retrieval of the Effective Parameters of Artificial Magnetic Materials based on a the Microstrip Line Method†Antennas and Propagation Society International Symposium-2008, pp.1-4, 2008.

      [5] M. Henry, C. E. Free, B. S. Izqueirdo, J. Batchelor, and P. Young , “Millimeter Wave Substrate Integrated Waveguide Antennas: Design and Fabrication Analysis†IEEETransactions on Advanced Packaging, Vol.32, No.1, pp.93-100, 2009.

      [6] Lara J. Martin, SooliamOoi, Daniela Staiculescu, Michael D. Hill, C. P. Wong, and

      [7] Manos M. Tentzeris, “Effect of Permittivity and Permeability of a Flexible MagneticComposite Material on the Performance and Miniaturization Capability of Planar Antennas for RFID and Wearable Wireless Applications†IEEE Transactions on Components andPackaging Technologies, Vol.32, No.4, pp.849-858, 2009.

      [8] Rashidian, M. TayfehAligodarz, D. M. Klymyshyn, M. Boerner, and J. Mohr, “PhotodefinableMicrocomposites for Antenna Applications†Antennas and Propagation Society International Symposium (APSURSI), pp. 1- 4, 2010.

      [9] AidinMehdipour, Iosif D. Rosca, Abdel-RazikSebak, Christopher W. Trueman, andSuong. V. Hoa , “Full-Composite Fractal Antenna Using Carbon Nanotubes for

      [10] Multiband Wireless Applications†IEEE Antenna and Wireless Propagation Letters, Vol. 9, pp. 891-894, 2010.

      [11] Radu Malureanu, Andrei Lavrinenko, David G. Cooke, and Peter Uhd Jepsen S. Xiao, L.Zhou (2010), “Transmission and Reflection Properties of Terahertz Fractal Metamaterialsâ€Lasers and Electro-Optics (CLEO) and Quantum Electronics and Laser Science Conference (QELS), pp. 1-2, 2010.

      [12] Steven E. Morris, Yakup Bayram, Lanlin Zhang, Zheyu Wang, Max Shtein, and John L.Volakis, “High-Strength, Metalized Fibers for Conformal Load Bearing Antenna Applications†IEEE Transactions Antennas and Propagation, Vol. 59, No.9, pp. 3458-3466, 2011.

      [13] AidinMehdipour, Abdel R. Sebak, Christopher W. Trueman, Iosif. D. Rosca and SuongV.Hoa , “Advanced conductive carbon fiber composite materials for antenna andmicrowave applications†Antennas and Propagation Society International Symposium

      (APSURSI), pp. 1-2, 2012.

      [14] John Schultz, Focused Beam Methods: Measuring Microwave Materials in Free SpaceTechnology & Engineering pp.1-18, 2012.

      [15] M. TayfehAligodarz, A. Rashidian, D. M. Klymyshyn, M. Schulz, M. Boerner, T.Hanemann, P. Meyer, and J. Mohr , “Polyester-styrene/Ceramic Nanocomposites forAntenna Applications†Antennas and Propagation Society International Symposium

      (APSURSI), Orlando, FL, pp. 1906 – 1907, 2013.

      [16] Trong N. Duong, Jayanti Venkataraman and ZhaolinLu, “Enhancement ofAmbient Energy Harvesting Using a Metamaterial Lens†Antennas and Propagation Society International Symposium (APSURSI), pp. 962-963, 2013.

      [17] Deborah D. L. Chung “Composite Materials: Functional Materials for Modern Technologiesâ€, Springer, pp.1-10, 2013.

      [18] Vimlesh Verma & P.K Singhal “Q-Arc Micro strip Fractal Antenna – in International Journal of Research in Antennas and Microwave Engineering in, Vol.02, Issue 01;pp.570-573, Jan- Feb 2013.

      [19] VimleshVerma & P.K Singhal “Electronic Band Gap Substrate Micro strip Dual band Fractal Antenna†in International Journal of Electronics & Communication Technology Vol. 4 Issue 1,pp.405-410, Jan-March 2013.

      [20] Meka Bharadwaj, Hari Kishore "Enhanced Launch-Off-Capture Testing Using BIST Designs†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.12, Issue No.3, page: 636-643, April 2017.

      [21] T. Padmapriya and V. Saminadan, “Priority based fair resource allocation and Admission Control Technique for Multi-user Multi-class downlink Traffic in LTE-Advanced Networksâ€, International Journal of Advanced Research, vol.5, no.1, pp.1633-1641, January 2017.

      [22] S.V.Manikanthan and K.srividhya "An Android based secure access control using ARM and cloud computing", Published in: Electronics and Communication Systems (ICECS), 2015 2nd International Conference on 26-27 Feb. 2015, Publisher: IEEE,DOI:10.1109/ECS.2015.7124833.

  • Downloads

  • How to Cite

    Singh, V., Bansal, P., & K.Singhal, P. (2018). Microstrip line Antenna Fabrication Material. International Journal of Engineering & Technology, 7(2.8), 340-344. https://doi.org/10.14419/ijet.v7i2.8.10437

    Received date: 2018-03-21

    Accepted date: 2018-03-21

    Published date: 2018-03-19