Detection and monitoring of fire and gas leakage systems in industries

  • Authors

    • K Geetha
    • P Prabha
    • C Preetha Devi
    • S Priyadharshini
    • S Tamilselvan
    2018-03-19
    https://doi.org/10.14419/ijet.v7i2.8.10473
  • .

  • Abstract

    Now a days, Industries are more equipped with automatic system. Fire monitoring is one of the applications where continuous monitoring of temperature and humidity is essential to detect the fire in the industry. Fire detection is very much necessary to protect both the industry and to conserve environment and livelihood of human. This paper presents an algorithm to detect the fire in the industry based on ZigBee and GPRS wireless sensor network which provides low cost, low maintenance and good quality service when compared with the traditional method. The hardware circuitry of proposed solution is based on microcontroller, temperature sensor along with ZigBee and GPRS modules.

  • References

    1. [1] ‘Digital Hardware Design’-J B Peatman

      [2] ‘Principles of Electronics’ - V.K.Metha

      [3] ‘Integrated Circuits’-K.R.Bothkar

      [4] ‘Industrial Electronics’-G.K.Mithal

      [5] ‘Microcontroller Idea Book’, John Acelson, Pri Publishers.

      [6] ‘Microprocessor and Microcontroller Applications’, Godse A P &Godse D A,Technical Publications- 2002.

      [7] ‘Maximize the lifetime of WSN using new backbone scheduling based algorithm’- S Alagumuthukrishnan, Dr. K.Geetha.

      [8] ‘The 8051 Microcontroller – Architecture, Programming & Applications’ – Kenneth J Ayala

      [9] ‘Programming & Customizing the 8051 Microcontroller’-Myke Predko

      [10] B. Son, Y. Her, J. Kim, “A design and implementation of forest-fires surveillance system based on wireless sensor networks for South Korea mountainsâ€, International Journal of Computer Science and Network Security (IJCSNS), 6, 9, 124–130, 2006.

      [11] B.M. Kierman, C. Fay, D. diamond “Development of autonomous greenhouse gas monitoring system†Proceedings ofworld academy of science ,engineering and technology vol.34, 2008.

      [12] Lopes dos Santos, ‘An LPV modeling and identification approach to leakage detection in high pressure natural gas transportation networks’. Control Systems Technology, IEEE Transactions on, 2011. 19(1): p. 77-92.

      [13] C. Ma, S. Yu, and J. Huo. Negative pressure wave-low testing gas pipeline leak based on wavelet transform. in Computer, Mechatronics, Control and Electronic Engineering (CMCE), 2010 International Conference on. 2010. IEEE N.NithyaRani“Implementation of OPC-Based Communication Between Temperature Process and DCS on LabVIEW Platform†in the “BEST: International Journal of Management, Information Technology and Engineering (BEST: IJMITE)†Vol. 1, Issue 1, Oct 2013.

      [14] R. Kalaivani, K. Ramash Kumar, S. Jeevananthan, “Implementation of VSBSMC plus PDIC for Fundamental Positive Output Super Lift-Luo Converter,†Journal of Electrical Engineering, Vol. 16, Edition: 4, 2016, pp. 243-258.

      [15] K. Ramash Kumar,â€Implementation of Sliding Mode Controller plus Proportional Integral Controller for Negative Output Elementary Boost Converter,†Alexandria Engineering Journal (Elsevier), 2016, Vol. 55, No. 2, pp. 1429-1445.

      [16] P. Sivakumar, V. Rajasekaran, K. Ramash Kumar, “Investigation of Intelligent Controllers for Varibale Speeed PFC Buck-Boost Rectifier Fed BLDC Motor Drive,†Journal of Electrical Engineering (Romania), Vol.17, No.4, 2017, pp. 459-471.

      [17] K. Ramash Kumar, D.Kalyankumar, DR.V.Kirbakaran†An Hybrid Multi level Inverter Based DSTATCOM Control, Majlesi Journal of Electrical Engineering, Vol. 5. No. 2, pp. 17-22, June 2011, ISSN: 0000-0388.

      [18] K. Ramash Kumar, S. Jeevananthan, “A Sliding Mode Control for Positive Output Elementary Luo Converter,†Journal of Electrical Engineering, Volume 10/4, December 2010, pp. 115-127.

      [19] K. Ramash Kumar, Dr.S. Jeevananthan,†Design of a Hybrid Posicast Control for a DC-DC Boost Converter Operated in Continuous Conduction Mode†(IEEE-conference PROCEEDINGS OF ICETECT 2011), pp-240-248, 978-1-4244-7925-2/11.

      [20] K. Ramash Kumar, Dr. S. Jeevananthan,†Design of Sliding Mode Control for Negative Output Elementary Super Lift Luo Converter Operated in Continuous Conduction Modeâ€, (IEEE conference Proceeding of ICCCCT-2010), pp. 138-148, 978-1-4244-7768-5/10.

      [21] K. Ramash Kumar, S. Jeevananthan, S. Ramamurthy†Improved Performance of the Positive Output Elementary Split Inductor-Type Boost Converter using Sliding Mode Controller plus Fuzzy Logic Controller, WSEAS TRANSACTIONS on SYSTEMS and CONTROL, Volume 9, 2014, pp. 215-228.

      [22] N. Arunkumar, T.S. Sivakumaran, K. Ramash Kumar, S. Saranya, â€Reduced Order Linear Quadratic Regulator plus Proportional Double Integral Based Controller for a Positive Output Elementary Super Lift Luo-Converter,†JOURNAL OF THEORETICAL AND APPLIED INFORMATION TECHNOLOGY, July 2014. Vol. 65 No.3, pp. 890-901.

      [23] Arunkumar, T.S. Sivakumaran, K. Ramash Kumar, “Improved Performance of Linear Quadratic Regulator plus Fuzzy Logic Controller for Positive Output Super Lift Luo-Converter,†Journal of Electrical Engineering, Vol. 16, Edition:3, 2016, pp. 397-408.

      [24] T. Padmapriya and V. Saminadan, “Priority based fair resource allocation and Admission Control Technique for Multi-user Multi-class downlink Traffic in LTE-Advanced Networksâ€, International Journal of Advanced Research, vol.5, no.1, pp.1633-1641, January 2017.

      S.V.Manikanthan and K.Baskaran “Low Cost VLSI Design Implementation of Sorting Network for ACSFD in Wireless Sensor Networkâ€, CiiT International Journal of Programmable Device Circuits and Systems,Print: ISSN 0974 – 973X & Online: ISSN 0974 – 9624, Issue : November 2011, PDCS112011008.

  • Downloads

  • How to Cite

    Geetha, K., Prabha, P., Preetha Devi, C., Priyadharshini, S., & Tamilselvan, S. (2018). Detection and monitoring of fire and gas leakage systems in industries. International Journal of Engineering & Technology, 7(2.8), 419-423. https://doi.org/10.14419/ijet.v7i2.8.10473

    Received date: 2018-03-22

    Accepted date: 2018-03-22

    Published date: 2018-03-19