Intelligent vehicle pollution monitoring using IoT

  • Authors

    • Saranyakumar Chigurupati
    • Ravi Teja Vallamsetti
    • Yogesh Misra
    • Ragipati Karthik
    2018-03-18
    https://doi.org/10.14419/ijet.v7i2.7.10723
  • Automobile, Arduino, Gas Sensor, IoT, SMS

  • Abstract

    The major source of air pollution is vehicles. The vehicular pollution is increasing day by day and smoke emission from Automobile is causing pollution and also becoming hazardous to people health. An Arduino based prototype is developed to monitor and send the in- formation about the pollution emitted by a vehicle to competent authority. Simultaneously, if the pollution level is high then the vehicle ignition will automatically off by the system. IoT technology has made it possible to send the information about the pollution level in the form of SMS.

     

  • References

    1. [1] Kevin Ashton (2009), “That „Internet of Things‟ Thingâ€, RFID Journal, available online: http://www.rfidjournal.com/articles/view?4986.

      [2] Kunja Bihari Swain; G. Santamanyu; Amiya Ranjan Senapati, “Smart industry pollution monitoring and controlling using LabVIEW based IoTâ€, 2017 Third International Conference on Sensing, Signal Processing and Security (ICSSS), 2017, pp. 7478.

      [3] Pollution Control (2018), “Government of Andhra Pradesh Transport Departmentâ€, available online:: http://www.aptransport.org/html/pollution-control.html.

      [4] P.U.C Certificate (2017), “Pollution standards is defined from the transport Delhi Government†July-2017, available online: http://delhi.gov.in/wps/wcm/connect/doit_transport/Transport/ Home/Pollution+Control/P.U.C.+Certificate.

      [5] Om Ariara Guhan C.P., Dr.Nagarajan G, “ Numerical study of fluid flow and effect of catalytic converter volume in optimisa- tion of diesel oxidation catalyst in a CI engine using CFDâ€, 2013 International Conference on Energy Efficient Technologies for Sustainability (ICEETS), 2013,pp. 670-677.

      [6] Mitar Simić, Goran M. Stojanović, Libu Manjakkal, Krzystof Zaraska, “Multi-Sensor System for Remote Environmental (Air and Water) Quality Monitoringâ€, 24th Telecommunications fo- rum TELFOR, 2016, pp. 1-4.

      [7] P.P. Ray, “A survey on Internet of Things architecturesâ€, Jour- nal of King Saud University - Computer and Information Sci- ences, 2016, pp.1-29.

      [8] Yuanyuan Chen; Jing Chen, “The design of multi-channel tem- perature detecting systemâ€, 2012 International Conference on Anti-counterfeiting, Security, and Identification, 2012, pp. 1-3.

      [9] Gianluca Barbon, Michael Margolis, Filippo Palumbo, Franco Raimondi, Nick Weldin, “Taking Arduino to the Internet of Things: The ASIP programming modelâ€, Elsevier Computer Communications, Volumes 89–90, 2016, pp. 128-140.

      [10] Maria Geme B. Palconit; Warren A. Nuñez, “Co2 emission monitoring and evaluation of public utility vehicles based on road grade and driving patterns: An Internet of Things applica- tionâ€, 2017 IEEE 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM), 2017, pp.1-6.

      [11] Marco Aurelio Borges; Paulo Batista Lopes; Leandro A. Silva; Massaki de O. Igarashi; Gabriel Melo F. Correia, “An Architec- ture for the Internet of Things and the Use of Big Data Tech- niques in the Analysis of Carbon Monoxideâ€,2017 IEEE Inter- national Conference on Information Reuse and Integration (IRI), 2017, pp. 184-191.

  • Downloads

  • How to Cite

    Chigurupati, S., Teja Vallamsetti, R., Misra, Y., & Karthik, R. (2018). Intelligent vehicle pollution monitoring using IoT. International Journal of Engineering & Technology, 7(2.7), 376-378. https://doi.org/10.14419/ijet.v7i2.7.10723

    Received date: 2018-03-27

    Accepted date: 2018-03-27

    Published date: 2018-03-18