An approach to hybridisation of embedded system networks

  • Authors

    • J Rajasekhar
    • Dr JKR Sastry
    2018-03-18
    https://doi.org/10.14419/ijet.v7i2.7.10748
  • ES Networking, Hybridization, Interconnection of Heterogeneous Networks.

  • Abstract

    Embedded systems can be networked using either wired or wireless technologies. ES systems when networked using wires can communicate serially over a bus using the technologies such as CAN, I2C, USB, RS485, and Fire wire. These standards differ in many ways which include arbitration, synchronization, address resolution, timing, type of communication etc. Embedded systems can also be network using wireless technologies which exits in many versions.Several applications these days are requiring more than one communication technology. Several sub-systems are developed using a networking method and it requires that the subsystems that are networked using different technologies are to be networked further for realizing entire application. Such a network needs to deal with many of the heterogeneous communication system leading to an issue of hybridisation. In this paper various issues/approaches that need to be addressed for hybridising of the ES networks have been presented.

     

     

  • References

    1. [1] CHAI Yan-jie, SUN Ji-yin, GAO Jing,TAO Ling-jiao, JI Jing, BAO Fei-hu,†Improvement of I2C Bus and RS-232 Serial Port under Complex Electromagnetic Environment†International Conference on Computer Science and Software Engineering , 2008, PP 178 -181.

      [2] Antonio Casimiro, Jose Rufino, Luis Marques, Mario Calha, and Paulo Verissimo “Applying Architectural Hybridization in Networked Embedded Systemsâ€, IFIP International Federation for Information Processing, 2009, PP 264-275.

      [3] Lou Guohuan,Zhang Hao, Zhao Wei,â€Research on Designing Method ofCAN Bus and Modbus Protocol Conversion Interface†International Conference on Future Bio Medical Information Engineering , 2009 , PP 180-182.

      [4] Xiaoming Li, Mingxiong Li, “An embedded CAN bus Communication module for measurement and control system, International conference on ICEEE, 10.119/ICEEE.2010.5661248, 2010

      [5] Peng Daogang, Zhang Hao, Li Hui, Xia Fei,†Development of the Communication Protocol Conversion Equipment Based on Embedded Multi-MCU and μC/OS-II†, International Conference on Measuring Technology and Mechatronics Automation, 2010 , PP 15-18.

      [6] Lou Guohuan, Cai Haiting, Li Shujie ,†Research and implementation of ARM-based fieldbus protocol conversion method “ , International Conference on Computer and Communication Technologies in Agriculture Engineering , 2010, PP 260-262.

      [7] Fang ZHAO, Daquan DENG, Zhensheng WANG, Huanzhao LIU ,†International Conference on Instrumentation, Measurement, Computer, Communication and Controlâ€, 2011, PP 180-183.

      [8] Hao Zhanga, Yanan Li a, Huiling Zhu ba,†Development for Protocol Conversion Gateway of Profibus and Modbus†ELSEVIER, 2011, PP 767 – 771.

      [9] Jason Oberg,Wei Hu,Ali Irturk,†Information Flow Isolation in I2C and USBâ€, Design Automation Conference, 2011, PP 254-259.

      [10] Li Hui, Zhang Hao, Peng Daogang,â€Design and Application of Communication Gateway of EPA and MODBUS on Electric Power System†International Conference on Future Electrical Power and Energy Systems, 2012, PP 286 – 292.

      [11] Gheorghe G.Florea,OanaI, Rohat, Monica G. Dragan, “Contributions to the Development of Communication Protocols Conversion Equipmentâ€, 2nd IFAC Workshop on Convergence of Information Technologies and Control Methods with Power Systems, 2013, VOLUME 46, Issue 6, PP 84-88.

      [12] Umesh Goyal, Gaurav Khurana,†Implementing MOD bus and CAN bus Protocol Conversion Interface†IJETT, 2013, VOLUME 4, Issue 4, PP 630-635.

      [13] Roopak Sinha,†Conversing at Many Layers: Multi-layer System-On-chip Protocol Conversionâ€, 20th International Conference on Engineering of Complex Computer Systems, 2015, PP 170-173.

      [14] JKR. Sastry, A. Suresh and Smt J. Sasi Bhanu,†building heterogeneous distributed embedded systems through rs485 communication protocol†ARPN Journal of Engineering and Applied Sciences, 2015, VOL. 10, NO. 16, PP 6793-6803.

      [15] JKR Sastry, J. Viswanadh Ganesh and J. Sasi Bhanu, “I2C based Networking for Implementing Heterogeneous Microcontroller based Distributed Embedded Systemsâ€, Indian Journal of Science and Technology, 2015, Vol 8(15), PP 1-10.

      [16] JKR Sastry, Valluru Sai Kumar Reddy, Smt J Sasi Bhanu, †Networking Heterogeneous Microcontroller based Systemsthrough Universal Serial Busâ€, IJECE, 2015, Vol. 5, No. 5, PP. 992-1002.

      [17] JKR. Sastry, M. Vijaya Lakshmi and Smt J. Sasi Bhanu,†OPTIMIZING COMMUNICATION BETWEEN HETEROGENEOUS DISTRIBUTED EMBEDDED SYSTEMS USING CAN PROTOCOLâ€, ARPN Journal of Engineering and Applied Sciences, 2015, VOL. 10, NO. 18, PP 7900-7911.

      [18] Shwetha.s, Karunavathi R.K,†The Design of Multiprotocol Interface Deviceâ€, Applied and Theoretical Computing and Communication Technology (iCATccT), 2016, PP 474-476.

      [19] Tae-Won Kim, Jin Ho Kim, Do Eon Lee, Jun young Moon, Jae Wook Jeon,†Development of Gateway based on BroadR-Reach for Application in Automation Networkâ€, International Conference on Computing, Communication and Automation, 2016, PP 421-426.

      [20] CHEN Huijuan,†Heterogeneous Network Integration Based on Protocol Conversion†Control Conference (CCC), 2016, PP 6888-6893.

      [21] Chen Wei,Wang Xijun,Sun Wenxia,†The Design of profinet- modbus protocol conversion Gateway Based on the ERTEC 200Pâ€, International Conference on Software, Knowledge, Information Management & Applications, 2016, PP 87-91.

  • Downloads

  • How to Cite

    Rajasekhar, J., & JKR Sastry, D. (2018). An approach to hybridisation of embedded system networks. International Journal of Engineering & Technology, 7(2.7), 384-389. https://doi.org/10.14419/ijet.v7i2.7.10748

    Received date: 2018-03-28

    Accepted date: 2018-03-28

    Published date: 2018-03-18