Parametric optimization of Edm on Hastelloy C-276 Using Taguchi L18 Technique

  • Authors

    • SK Khadar Basha
    • Murahari Kolli
    • M V.Jagannadha Raju
    2018-03-18
    https://doi.org/10.14419/ijet.v7i2.7.10929
  • Hastelloy C-276, Taguchi L18, Eco friendly dielectric, EDM.

  • Abstract

    Due to development in machining science the use of composites and alloys is a great deal for every industry. Hastelloy C276 the most versatile corrosion resistant nickel based super alloy which is used for industrial applications is considered for doing the            experiments .The high nickel and molybdenum content provides better corrosion resistance at extreme environments. In this report, the experiments are performed by using Taguchi L18 technique and their results are used for performance of each process parameters on their output responses. The process parameters considered for experimentation are discharge current, pulse- on- time, type of electrode and pulse off time for the output responses of material removal rate and surface roughness. Eco-friendly (drinking water) is used as a dielectric fluid. The experiments are designed and conducted using Taguchi L18 technique and analyze the influence of each process parameters on machining performance characteristics. Further, mathematical equations were developed using the statistical software MINITAB17.0.ANOVA is used for analyzing the experimental results obtained. It was observed from the response table that the average values of MRR and SR for pulse on time, discharge current, electrode are identified as important process parameters.

     

     

  • References

    1. [1] M. Uthayakumar, M. Adam Khan, S. Thirumalai Kumaran, Adam Slota & Jerzy Zajac (2015), Machinability of Nickel Based Superalloy by Abrasive Water Jet Machining, Materials andManufacturingProcesses,DOI:10.1080/10426914.2015.1103859.

      [2] K.H. Ho and S.T. Newman(2003), State of the art electrical discharge machining (EDM), International Journal of Machine Tools & Manufacture, 43, 1287-1300.

      [3] Guo Y., Wu D., Ma G. and Guo D(2014), Trailing heat sink effects on residual stress and distortion of pulsed laser welded Hastelloy C-276 thin sheets. Journal of Materials Processing Technology, 214(12), pp.2891-2899.

      [4] Akhter JI, Shaikh MA, Ahmad M, Iqbal M, Shoaib KA, Ahmad W. Effect of aging on the hardness and impact properties of Hastelloy C-276 (2001), Journal of Materials Science Letters.20 (4):333-5.

      [5] Ahmad M, Akhter JI, Iqbal M, Akhtar M, Ahmed E, Shaikh MA and Saeed K (2005), Surface modification of Hastelloy C-276 by SiC addition and electron beam melting. Journal of nuclear materials, 336(1):120-4.

      [6] Md.karim Baig and N.venkaiah (2014), Parametric optimization of WEDM for HastelloyC276 using GRA method, International Journal of Engineering Development and Research, ISSN: 2321-9939, Vol.1, Issue 2, pp.1 -7.

      [7] P J. Ross, Taguchi techniques for quality engineering. Mc Graw-Hill: 1998: 24-98.

      [8] D C. Design and analysis of experiments. Wiley: 1997: 395- 476.

      [9] Phadke Madhav S. Quality engineering using robust design prentice Hall. 1989: 41- 229.

      [10] M Kolli and A Kumar (2014),Parametric Optimization of Boron Carbide Powder Added Electrical Discharge Machining of Titanium Alloy. In Applied Mechanics and Materials, 592, pp. 678-683.

      [11] M Kolli and A Kumar (2015), Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method, Engineering Science and Technology, an International Journal, 18(4), pp.524-535.

      [12] M Kolli and A Kumar (2015), Surfactant and graphite powder–assisted electrical discharge machining of titanium alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, p.0954405415579019.

      [13] A.M.Nikalje, A. Kumar and K.S.Srinadh (2013), Influence of parameters and optimization of EDM performance measures

  • Downloads

  • How to Cite

    Khadar Basha, S., Kolli, M., & V.Jagannadha Raju, M. (2018). Parametric optimization of Edm on Hastelloy C-276 Using Taguchi L18 Technique. International Journal of Engineering & Technology, 7(2.7), 714-716. https://doi.org/10.14419/ijet.v7i2.7.10929

    Received date: 2018-04-02

    Accepted date: 2018-04-02

    Published date: 2018-03-18