Skills Workers in Mechanical Engineering to Produce Portable Sprocket

  • Authors

    • W Omar Ali Saifuddin bin Wan Ismail
    • Noraini binti Hamzah
    • Mohd Nazafee bin Mohd Ridhuan Tee
    2018-04-06
    https://doi.org/10.14419/ijet.v7i2.14.11153
  • Skills, Jig, Fixture, Sprocket, Mechanical Engineering

  • Sprocket is a wheel with teeth that mesh with a chain. It is being used widely in automotive and      machinery to transmit rotary motion between the shafts. In manufacturing the sprockets, some of the workers have the skills to make it and some of them lack the skills. Skills are important in manufacturing engineering. The main focus of this research is to help: i. the workers in manufacturing the sprocket efficiently; and ii. low cost while providing good quality of sprocket. In this research, operations that require machining some of them are simple which can be done easily such as turning. No other devices needed to hold the workpiece in such an operation. The research aims to develop a jig & fixture tool which is called a sprocket. While the research methodology is divided into 2 which are the procedure during the making of the project and the results and discussion obtained. This study is very useful for small and big industries for the sprocket process. It would help the user to make sprockets only using this sprocket maker to guide the drilling machine. It is a low cost and efficient way for manufacturers that is currently in this sprocket manufacturing.

     

     

  • References

    1. [1] National Society of Professional Engineers (2013). Engineering Body of Knowledge.

      [2] S. Haase, H.L. Chen, S. Sheppard, A. Kolmos and N. Mejlgaard. (2013). What Does It Take to Become a Good Engineer? Identifying Cross-National Engineering Student Profiles According to Perceived Importance of Skills. International Journal of Engineering Education.

      [3] Hamad Mohammed Abouhenidi,(2014). Jigs and Fixture Design, St. Mary’s University, page 143, International Journal of Scientific & Engineering Research, Volume 5, Issue 2, February-2014 142 ISSN 2229-5518.

      [4] Charles Chikwendu Okpala, Ezeanyim Okechukwu C, (2015). The Design and Need for Jigs and Fixtures in Manufacturing. Science Research. Vol. 3, No. 4, 2015, pp. 213-219. doi: 10.11648/j.sr.20150304.19

      [5] Sawita D. Dongre1, Prof. U. D. Gulhane2, Harshal C. Kuttarmare3, (2014). Design and Finite Element Analysis of Jigs and Fixtures for Manufacturing of Chassis Bracket, International Journal of Research in Advent Technology, Vol.2, No.2, February 2014, E-ISSN: 2321-9637

      [6] Ashish Y. Dakhole & M.S Tufail, (2012). Design of Automated Conveyorised, Fixture, Arrangement For Banjo Beam In Special Purpose Machine, International Journal of Instrumentation, Control and Automation (IJICA) ISSN: 2231-1890, Vol-1 Iss-3,4, 2012

      [7] 7. Avishek Mishra, Prabhat K. Singh, Md. Shahrukh Haque, Ghanshyam Kurre, Sandeep Rathor, Chova R. Sahu, (2016). Study of Convertible Wheel Drives Using Chain Sprocket, 31/03/2016 , Internation Journal Of Advance Research And Innovative Ideas In Education ,e-ISSN: 2395-4396, Volume 2 Issue 2 2016.

      [8] Omkar Joshi, Dr. Arunkumar, (2015), International Journal of Production and Mechanical Engineering Volume III Issue IV October – December 2015

      [9] Amosh Shanker, Hemant Gurung, Laden Doma Bhutia, Saurabh Sharma & T.Y Ladhaki, (2013). Design and Analysis of Linear Two Axis Drill Jigs, ISSN : 2319 – 3182, Volume-2, Issue-4, 2013

      [10] Tanmaya Mohanty, (2013). Surface Quality Improvement Using Modified Tool Clamping In Boring Operations, ISSN (Online): 2320-9364, ISSN : 2320-9356 www.ijres.org Volume 1 Issue 8 Dec2013 PP.33-41.[10]

      [11] Pritam Kumar Kundu (2013). Design and Fabrication of a Work Holding Device for a Drilling Machine, Department of Mechanical Engineering National Institute of Technology Rourkela –769008 2013-2014.

      [12] Navya K.R., S. Pradeep, (2013). Automation of Fixtures Using Hydraulic Power Pack for a Bogie Underframe, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e - ISSN: 2278-1684, p-ISSN: 2320-334X, Volume 10, Issue 1 (Nov. -Dec. 2013), PP 78-88.

      [13] Sotiris L. Omirou, (2015). Article in Journal for Manufacturing Science & Production 15(2) · January 2015 DOI: 10.1515/jmsp-2014-0028

      [14] Suneet J. Mehta, Niyati N. Raut, (2016). Assistant Professor Volume 6 Issue No. 4 DOI 10.4010/2016.778 ISSN 2321 3361 © 2016 IJESC Title CNC Milling Machining Optimization Using Genetic Algorithm.

      [15] Bo Gu; Henry Helvajian; Alberto Piqué, (2016). Conference Volume 9738, Laser 3D Manufacturing III, , San Francisco, California, United States | February 13, 2016

      [16] Prof. Thomas M. Cooney (2012). Entrepreneurship Skills for Growth-Orientated Businesses, Dublin Institute of Technology, Report for the Workshop on ‘Skills Development for SMEs and Entrepreneurship’, Copenhagen, 28 November 2012.

      [17] Erkko Autio (2014). Entrepreneurial innovation: The importance of context, Enterprise Research Centre, Imperial College Business School, Tanaka Building, South Kensington Campus, London, United Kingdom

  • Downloads

  • How to Cite

    Omar Ali Saifuddin bin Wan Ismail, W., binti Hamzah, N., & Nazafee bin Mohd Ridhuan Tee, M. (2018). Skills Workers in Mechanical Engineering to Produce Portable Sprocket. International Journal of Engineering & Technology, 7(2.14), 48-52. https://doi.org/10.14419/ijet.v7i2.14.11153