Open switch fault detection technique of a back-to-back converter using NPC topology for turbine systems

  • Authors

    • S Mahaboob Basha
    • M Kannan
    2018-04-03
    https://doi.org/10.14419/ijet.v7i2.12.11351
  • Current Distortion, NPC Inverter, NPC Rectifier, NPC Technology, Open-Switch Fault.

  • Abstract

    Efficiency is turning into more and more necessary in power electronics. New applications are developed to reduce the consumption of en-ergy. Inverters that supply continuous quality power have vast use in solar energy based applications. For a Wind Turbine Generation sys-tem with neutral-point-clamped (NPC) topology in a back to back converter , good efficiency is provided when operated at high power. In NPC topology totally twelve switches are present. Input current distortion, torsion vibration and output current distortion is caused by open switch fault within NPC inverter and rectifier of the consecutive converter. Wind Turbine Generation systems will be erroneous due to such faults. Open-switch fault detection methodology is necessary for consecutive converters for enhancing the output of Wind Turbine Genera-tion systems. Our proposed work checks NPC rectifier and inverter for outer and inner open switch faults. Additionally for all the possible open-switch faults , a novel open-switch fault detection methodology within the back to back converter has been presented in this paper.

     

     

  • References

    1. [1] Zeng, Z., Zhao, R., Yang, H., et al.: ‘Topologies and control strategies of multi-functional grid-connected inverters for power quality enhancement: A comprehensive review’, Renew. Sustain. Energy Rev., 2013, 24, pp. 223–270.

      [2] Fan, L.L., Miao, Z.X.: ‘Mitigating SSR using DFIG-based wind generation’, IEEE Trans. Sustain. Energy, 2012, 3, (3), pp. 349–358.

      [3] Zeng, Z., Yang, H., Tang, S., et al.: ‘Objective-oriented power quality compensation of multi-functional grid-tied inverters and its application in micro-grids’, IEEE Trans. Power Electron., 2015, 30, (3), pp. 1255–1265.

      [4] Tummuru, N.R., Mishra, M.K., Srinivas, S.: ‘Multifunctional VSC controlled microgrid using instantaneous symmetrical components theory’, IEEE Trans. Sustain. Energy, 2014, 5, (1), pp. 313–322.

      [5] Zeng, Z., Yang, H., Guerrero, J.M., et al.: ‘Multi-functional distributed generation unit for power quality enhancement’, IET Power Electron., 2015, 8, (3), pp. 467–476.

      [6] Dai, N.Y., Zhang, W.C., Wong, M.C., et al.: ‘Analysis, control and experimental verification of a single-phase capacitive-coupling grid-connected inverter’, IET Power Electron., 2015, 8, (5), pp. 770–782.

      [7] Vasquez, J.C., Mastromauro, R.A., Guerrero, J.M., et al.: ‘Voltage support provided by a droop-controlled multifunctional inverter’, IEEE Trans. Ind. Electron., 2009, 56, (11), pp. 4510–4519.

      [8] Sawant, R.R., Chandorkar, M.C.: ‘Methods for multi-functional converter control in three-phase four-wire systems’, IET Power Electron., 2009, 2, (1), pp. 52–66.

      [9] Mahdianpoor, F.M., Hooshmand, R.A., Ataei, M.: ‘A new approach to multifunctional dynamic voltage restorer implementation for emergency control in distribution systems’, IEEE Trans. Power Deliv., 2011, 26.

      [10] Singh, M., Khadkikar, V., Chandra, A.: ‘Grid synchronisation with harmonics and reactive power compensation capability of a permanent magnet synchronousgenerator-based variable speed wind energy conversion system’, IET Power Electron., 2011, 4, (1), pp. 122–130.

      [11] Todeschini, G., Emanuel, A.E.: ‘Wind energy conversion systems as active filters: Design and comparison of three control methods’, IET Renew. Power Gener., 2010, 4, (4), pp. 341–353.

      [12] Zeng, Z., Zhao, R., Yang, H., et al.: ‘Topologies and control strategies of multi-functional grid-connected inverters for power quality enhancement: A comprehensive review, Renew. Sustain. Energy Rev., 2013, 24, pp. 223–270.

      [13] M. Mobarrez, M. G. Kashani, G. Chavan, and S. Bhattacharya, "A Novel Control Approach for Protection of Multi-Terminal VSC based HVDC Transmission System against DC Faults," in ECCE 2015-Energy Conversion Congress & Exposition, Canada, 2015, pp. 4208- 4213.

      [14] Wang, F., Duarte, J.L., Hendrix, M.A.M.: ‘Grid-interfacing converter systems with enhanced voltage quality for microgrid application-concept and implementation’, IEEE Trans. Power Electron., 2011, 26, (12), pp. 3501–3513.

      [15] Han, B., Bae, B., Kim, H., et al.: ‘Combined operation of unified power-quality conditioner with distributed generation’, IEEE Trans. Power Deliv., 2006, 21, (1), pp. 330–338.

      [16] Li, Y., Vilathgamuwa, D.M., Loh, P.C.: ‘Microgrid power quality enhancement using a three-phase four-wire grid-interfacing compensator’, IEEE Trans. Ind. Appl., 2005, 41, (6), pp. 1707–1719.

      [17] Wu, T.F., Nien, H.S., Shen, C.L., et al.: ‘A single-phase inverter system for PV power injection and active power filtering with nonlinear inductor consideration’, IEEE Trans. Ind. Appl., 2005, 41, (4), pp. 1075–1083.

      [18] Sawant, R.R., Chandorkar, M.C.: ‘Power boundaries in multifunctional converter control for three-phase four-wire systems’. Proc. IEEE Region 10 Annual Int. Conf., 2008, pp. 1–6.

      [19] Macken, K.J.P., Vanthournout, K., Van den Keybus, J., et al.: ‘Distributed control of renewable generation units with integrated active filter’, IEEE Trans. Power Electron., 2004, 19, (5), pp. 1353–1360.

      [20] Zeng, Z., Zhao, R., Yang, H.: ‘Coordinated control of multi-functional grid-tied inverters using conductance and susceptance limitation’, IET Power Electron., 2014, 7, (7), pp. 1821–1831.

      [21] Farghal, S.A., Kandil, M.S., Elmitwally, A.: ‘Quantifying electric power quality via fuzzy modelling and analytic hierarchy processing’, IEE Proc. – Gener. Trans. Distrib., 2002, 149, (1), pp. 44–49.

      [22] Morsi, W.G., El-Hawary, M.E.: ‘Power quality evaluation in smart grids considering modern distortion in electric power systems’, Electr. Power Syst. Res., 2011, 81, (5), pp. 1117–1123.

      [23] Salarvand, A., Mirzaeian, B., Moallem, M.: ‘Obtaining a quantitative index for power quality evaluation in competitive electricity market’, IET Gener. Trans. Distrib., 2010, 4, (7), pp. 810–823.

      [24] Mohanraj, K., Paramasivam, S., Dash, S.S., Ramprasad, S. Analysis of DC bus fault and line faults on voltage source inverter fed induction motor(2013) International Review on Modelling and Simulations, 6 (6), pp. 1907-1913.

  • Downloads

  • How to Cite

    Mahaboob Basha, S., & Kannan, M. (2018). Open switch fault detection technique of a back-to-back converter using NPC topology for turbine systems. International Journal of Engineering & Technology, 7(2.12), 359-364. https://doi.org/10.14419/ijet.v7i2.12.11351

    Received date: 2018-04-10

    Accepted date: 2018-04-10

    Published date: 2018-04-03