Flow based valve position control using NI my DAQ

  • Authors

    • Kalyan Dusarlapudi
    • K Uday Kiran
    • M V.Narayana
    • M Venkata Suman
    2018-03-18
    https://doi.org/10.14419/ijet.v7i2.7.11433
  • NI My DAQ, NI Lab VIEW, Potentiometer, Servo Mechanism.

  • Abstract

    This paper emphasizes the required valve position by servo mechanism, which decides the flow rate through pipe. The servo position is decided through Ni Lab View virtual indicator& the same position is tracked by potentiometer with NI My DAQ. The deviation of the valve position is finding by comparing both the positions. This study will helps to maintain the desired flow value where flow rate plays an important role such as Pharmaceutical industry, bottle filling industry Etc.

     

     

  • References

    1. [1] Jianying Liu, Pengju Zhang, Fei Wang, "Real –Time DC Servo Motor Position Control by PID Controllers Using Labview", 2009 International Conference on Intelligent Human-Machine Systems and Cybernetics.

      [2] Shibly Ahmed AL-Samarraie, YasirKhudhairAbbas , "Design of Electronic Throttle Valve Position Control System using Nonlinear PID Controller, International Journal of Computer Applications (0975 – 8887) Volume 59– No.15, December 2012.

      [3] Danahermotiom, “SERVOSTAR S- and CD-Series Positioncontrolâ€, November 2003 Document Number P-SS-001-13Rev 4 Old number (ASYU007H).

      [4] “NI-MyDAQ User Manual", http://www.ni.com/pdf/manuals/373060g.pdf.

  • Downloads

  • How to Cite

    Dusarlapudi, K., Uday Kiran, K., V.Narayana, M., & Venkata Suman, M. (2018). Flow based valve position control using NI my DAQ. International Journal of Engineering & Technology, 7(2.7), 955-957. https://doi.org/10.14419/ijet.v7i2.7.11433

    Received date: 2018-04-12

    Accepted date: 2018-04-12

    Published date: 2018-03-18