Development of the mathematical model for the process of oil raw materials pressing

  • Authors

    • Ainura Kairbayeva
    • Vitalii Vasilenko
    • Seit Dzhinguilbayev
    • Lyazzat Baibolova
    • Larisa Frolova
    2018-04-15
    https://doi.org/10.14419/ijet.v7i2.13.11629
  • Pressing, Oil Crops, Mathematical Model, Heat and Mass Transfer.
  • The mathematical model for the process of oily raw materials pressing with single-screw oil press has been developed, which makes it possible to calculate the main design parameters of an oil press for extracting oil from oil crop seeds.

    This model of pressing describes the process of moving meal in the pressure zone and expression of oil in the pressing cage of the screw press, taking into account the following assumptions: porous skeleton and oil have the same density, they have no chemical interaction, the process of oil filtration occurs under isothermal conditions with laminar conditions of motion.

    The developed mathematical model corresponds to physical meaning of the occurring phenomena and can be used to analyze the work of active presses, and at the design stage.

     

  • References

    1. [1] V.N. Vasilenko Investigation of the kinetic regularities of the extraction of vegetable oils in a screw oilpress [Text] / V. N. Vasilenko M.V. Kopylov // Bulletin of Voronezh State University of Engineering Technologies 2012. â„– 1. P. 10-12.

      [2] Development of theoretical and technological bases for complex processing of oilseeds: Monograph/ V. N. Vasilenko, L. N. Frolova, I. V. Dragan. Voronezh: VSUET, 2014. p. 148.

      [3] L.N. Frolova Modeling of the process of oscillating drying of oil crops on the example of camelina oil seeds [Text] / L. N. Frolova, I. V. Dragan, Yu.A.Tarkaev, S.A. Shevtsov / / Storage and processing of agricultural raw materials. - 2014. - â„– 4. - p. 31-34.

      [4] Sokolovskyy J. Mathematical modeling of the two-dimentional moisture and viscoelasticity states of wood in the process of drying/ J. Sokolovskyy , M. Dendiuk, A. Bakalets // Forest as renewable source of vital values for changing world: IAWS plenary meeting and conference. – S.-Petersburg-Moscow, 2009. – P. 34.

      [5] Gurta Es Seyhan, F. Low temperature mushroom (A. bisporus) drying with desiccant dehumidifiers [Text] / F. Gurta Es Seyhan, O. Evranuz // Drying Technology. – 2000. – № 18. –Р. 433 - 445.

      [6] R.M. Davies Engineering Properties of Three Varieties of Melon Seeds as Potentials for Development of Melon Processing Machines/ Advance Journal of Food Science and Technology 2(1):63-66, 2010: ISSN: 2042-4876.

      [7] S.K. Shittu, V.I.O. Ndrika. Development and performance tests of a melon (egusi) seed shelling machine. Agric Eng Int: CIGR Journal, 14(1): Manuscript 2027.

      [8] http://www.waset.org/publications/10002551/comparative-study-of-the-effects-of-process-parameters-on-the-yield-of-oil-from-melon-seed-cococynthis-citrullus-and-coconut-fruit-cocos-nucifera-

      [9] An Addo and A. Bart-Plange Kinetics of water sorption by egusi melon (Cucumeropsis edulis) seeds / ARPN Journal of Agricultural and Biological Science. VOL. 4, NO. 6, NOVEMBER 2009: ISSN 1990-6145.

      [10] V. N. Vasilenko M. V. Kopilov A.V. Nakraynikova Creation of a CAD system, "Maslopress"//Bulletin of Engineering 2012. № 2. С. 35−36.

      [11] Processes and devices of food production text book for universities [Text] / A.N. Ostrikov, O.V. Abramov, A.V. Loginov, Yu.V. Krasovitsky, V.N. Vasilenko, -SPb. GIORD, 2012. – 616 p.

  • Downloads

  • How to Cite

    Kairbayeva, A., Vasilenko, V., Dzhinguilbayev, S., Baibolova, L., & Frolova, L. (2018). Development of the mathematical model for the process of oil raw materials pressing. International Journal of Engineering & Technology, 7(2.13), 145-149. https://doi.org/10.14419/ijet.v7i2.13.11629