Development of FOPDT and SOPDT model from arbitrary process identification data using the properties of orthonormal basis function

  • Authors

    • Lalu Seban
    • Namita Boruah
    • Binoy K. Roy
    2018-04-20
    https://doi.org/10.14419/ijet.v7i2.21.11840
  • First-Order Plus Delay Time Model, Second-Order Plus Delay Time Model, System Identification, Orthonormal Basis Function Models.
  • Most of industrial process can be approximately represented as first-order plus delay time (FOPDT) model or second-order plus delay time (FOPDT) model. From a control point of view, it is important to estimate the FOPDT or SOPDT model parameters from arbitrary process input as groomed test like step test is not always feasible. Orthonormal basis function (OBF) are class of model structure having many advantages, and its parameters can be estimated from arbitrary input data. The OBF model filters are functions of poles and hence accuracy of the model depends on the accuracy of the poles. In this paper, a simple and standard particle swarm optimisation technique is first employed to estimate the dominant discrete poles from arbitrary input and corresponding process output. Time constant of first order system or period of oscillation and damping ratio of second order system is calculated from the dominant poles. From the step response of the developed OBF model, time delay and steady state gain are estimated. The parameter accuracy is improved by employing an iterative scheme. Numerical examples are provided to show the accuracy of the proposed method.

     

  • References

    1. [1] Ogunnaike BA & Ray WH, Process dynamics, modeling, and control. Oxford University Press New York, Interaction analysis and multiple single loop designs, (1994), pp. 757–758.

      [2] Roffel B & Betlem B, Process dynamics and control: Modeling for control and prediction. John Wiley & Sons, (2007).

      [3] Seborg DE, Mellichamp DA, Edgar TF & Doyle III F.J., Process dynamics and control. John Wiley & Sons, 2010.

      [4] Shridhar R & Cooper DJ, “A tuning strategy for unconstrained siso model predictive controlâ€, Industrial & Engineering Chemistry Research†Vol.36, No.3, (1997), pp. 729–746.

      [5] Garriga J.L & Soroush M, “Model predictive control tuning methods: A reviewâ€, Industrial & Engineering Chemistry Research, Vol.49, No.8, (2010), pp.3505–3515.

      [6] Bagheri P & Sedigh AK, “Analytical approach to tuning of model predictive control for first-order plus dead time models,†IET Control Theory Applications, Vol.7, No.14, (2013), pp.1806–1817.

      [7] Astrom KJ & Ha ̈gglund T, PID Controllers: Theory, Design, and Tuning, 2nd ed. Instrument Society of America, Research Triangle Park, NC, (1995).

      [8] Bi Q, Cai W.J, Lee EL., Wang QG., Hang CC & Zhang Y, “Robust identification of first-order plus dead- time model from step responseâ€, Control Engineering Practice, Vol.7, No.1, (1999), pp.71 – 77,

      [9] Fedele G, “A new method to estimate a first-order plus time delay model from step responseâ€, Journal of the Franklin Institute, Vol.346, No.1, (2009), pp.1 – 9.

      [10] De La Barra BAL & Mossberg M, “Identification of under-damped second-order systems using finite duration rectangular pulse inputsâ€, American Control Conference, (2007), pp.834–839.

      [11] Luyben WL, “Derivation of transfer functions for highly nonlinear distillation columnsâ€, Industrial & Engineering Chemistry Research, Vol.26, No.12, (1987), pp.2490–2495.

      [12] Kaya I & Atherton D, “Parameter estimation from relay auto tuning with asymmetric limit cycle dataâ€, Journal of Process Control, Vol.11, No.4, (2001), pp.429 – 439.

      [13] Tufa LD, Ramasamy M & Shuhaimi M, “Improved method for development of parsimonious orthonormal basis filter modelsâ€, Journal of Process Control, Vol.21, No.1, pp.36 – 45, 2011.

      [14] Heuberger PS, Van den Hof PM & Wahlberg B, “Modelling and identification with rational orthogonal basis functionsâ€, Springer Science & Business Media, (2005).

      [15] Tufa LD, Ramasamy M & Mahadzir S, System Identification Using Orthonormal Basis Filters. INTECH Open Access Publisher, (2012).

      [16] Madakyaru M, Narang A & Patwardhan SC, “Development of ARX Models for Predictive Control Using Fractional Order and Orthonormal Basis Filter Parametrizationâ€, Industrial & Engineering Chemistry Research, Vol.48, No.19, (2009), pp.8966–8979.

      [17] Patwardhan SC, Manuja S, Narasimhan S & Shah SL, “From data to diagnosis and control using generalized orthonormal basis filtersâ€, Part II: Model predictive and fault tolerant control, Journal of Process Control, Vol.16, No.2, (2006), pp.157 – 175.

      [18] Ninness B & Gustafsson F, “A unifying construction of orthonormal bases for system identificationâ€, IEEE Transactions on Automatic Control, Vol.42, No.4, (1997), pp.515–521.

      [19] Wahlberg B, “System identification using Laguerre modelsâ€, IEEE Transactions on Automatic Control, Vol.36, No.5, (1991), pp. 551–562.

      [20] Hof PMVD, Heuberger PS & Bokor J, “System identification with generalized orthonormal basis functionsâ€, Automatica, Vol.31, No.12, (1995), pp.1821–1834.

      [21] Lemma D, Ramasamy M, Patwardhan S & Shuhaimi M, “Develop- ment of second order plus time delay (soptd) model from orthonormal basis filter (obf) modelâ€, In Conference on UK Automatic Control, University of Manchester, (2008).

      [22] Tufa LD, Ramasamy M, Patwardhan SC & Shuhaimi M, “Development of box–jenkins type time series models by combining conventional and orthonormal basis filter approachesâ€, Journal of Process Control, Vol.20, No.1, (2010), pp.108–120.

  • Downloads

  • How to Cite

    Seban, L., Boruah, N., & K. Roy, B. (2018). Development of FOPDT and SOPDT model from arbitrary process identification data using the properties of orthonormal basis function. International Journal of Engineering & Technology, 7(2.21), 77-83. https://doi.org/10.14419/ijet.v7i2.21.11840