Optimal design selection and analysis of single sided linear induction motor

  • Authors

    • Sijitha Issac
    • S Poorani
    2018-04-20
    https://doi.org/10.14419/ijet.v7i2.21.12177
  • Optimization technique, induction motor drive, power factor, single-sided linear induction motor, efficiency.

  • Abstract

    This paper investigates the design and implementation of single-sided linear induction motor towards determining the end effect intensity, reduces the primary weight of the system and improves the efficiency by multi-objective optimisation approach. This optimisation technique is a combination of genetic with cuckoo search (GCS) algorithm is introduced to improvise the efficiency and power factor, as well as to minimize the end effect intensity, simultaneously. The performance of the designed novel approach will be validated based on the measure of different parameters such as Efficiency, Power factor, Maximum thrust slip, Aluminum thickness, Primary width/pole pitch, Primary current density and the braking force due to the end effect. Finally, to validate the optimisation results, 3D finite element method is employed and compared the results with the existing technique like GA, PSO, and Cuckoo search.

     

  • References

    1. [1] Suetake M, Da Silva IN & Goedtel A, “Embedded DSP-Based Compact Fuzzy System and Its Application for Induction-Motor V/f Speed Controlâ€, IEEE Trans. Ind. Electron., Vol.58, No.3, (2011), pp. 750–760.

      [2] Marino R, Tomei P & Verrelli CM, “An adaptive tracking control from current measurements for induction motors with uncertain load torque and rotor resistanceâ€, Automatica, Vol.44, No.10, (2008), pp.2593–2599.

      [3] Reza CMFS, Islam MD & Mekhilef S, “A review of reliable and energy efficient direct torque controlled induction motor drivesâ€, Renew. Sustain. Energy Rev., Vol.37, (2014), pp.919–932.

      [4] Dos Santos TH, Goedtel A, Da Silva SAO & Suetake M, “Scalar control of an induction motor using a neural sensorless techniqueâ€, Electr. Power Syst. Res., Vol.108 (2014), pp.322–330.

      [5] Kashif SAR, Saqib MA & Zia S, “Implementing the induction-motor drive with four-switch inverter: An application of neural networksâ€, Expert Syst. Appl., Vol.38, No.9, (2011), pp.11137–11148.

      [6] Siddique A, Yadava GS & Singh B, “A Review of Stator Fault Monitoring Techniques of Induction Motors,†IEEE Trans. Energy Convers., Vol.20, No.1, (2005), pp.106–114.

      [7] Alsofyani IM & Idris NRN, “A review on sensorless techniques for sustainable reliablity and efficient variable frequency drives of induction motorsâ€, Renew. Sustain. Energy Rev., Vol.24, (2013), pp.111–121.

      [8] Sikarwar S & Barve A, “Discrete PI and PID controller based three phase induction motor drive: a reviewâ€, Int. J. Electr. Comput. Eng., Vol.2, (2013), pp.97–100.

      [9] Demirtas M, “DSP-based sliding mode speed control of induction motor using neuro-genetic structureâ€, Expert Syst. Appl., Vol.36, No.3, (2009), pp.5533–5540.

      [10] Rong-Jong W, Jeng-Dao L & Kuo-Min L, “Robust decoupled control of direct fieldoriented induction motor driveâ€, In Control Conference 5th Asian, (2004), pp.1346–1353.

      [11] Zhang D & Li H, “A Stochastic-Based FPGA Controller for an Induction Motor Drive with Integrated Neural Network Algorithmsâ€, IEEE Trans. Ind. Electron., Vol.55, No.2, (2008), pp. 551–561.

      [12] Rafa S, Larabi A, Barazane L, Manceur M, Essounbouli N & Hamzaoui A, “Implementation of a new fuzzy vector control of induction motorâ€, ISA Trans., Vol.53, No.3, (2014), pp.744–754.

      [13] Hannan MA, Ali JA, Mohamed A & Hussain A, “Optimization techniques to enhance the performance of induction motor drives: A reviewâ€, Renew. Sustain. Energy Rev., (2017).

      [14] Jiang Y, Xu W, & Ye C, “Composite field-oriented control for linear induction motor based super-twisting sliding mode observersâ€, IEEE Conference on Electromagnetic Field Computation (CEFC), (2016), pp. 1–1.

      [15] Bucci G, Meo S, Ometto A, & Scarano M, “The control of LIM by a generalization of standard vector techniquesâ€, Proceedings of IECON’94 20th Annual Conference of IEEE Industrial Electronics, Vol.1, (2002), pp.623–626.

      [16] Mohamed EEM & Sayed MA, “Matrix converters and three-phase inverters fed linear induction motor drives—Performance compareâ€, Ain Shams Eng. J., (2016).

      [17] Maktabdar O, Shamsinezhad M & Eliasi H, “Effect of Reaction Plate on Performance of Single-Side Linear Induction Motor in Different Speeds and Frequencies with Finite Element Methodâ€, 9th Symposium on Advances in Science & Technology (2015), pp.34–38.

      [18] Liu A, Zhang H, Yang G & Lin X, “Research and application of multi-objective particle swarm optimization in linear induction motor operating mechanismâ€, 1st International Conference on Electric Power Equipment Switching Technology, (2011) pp.291–295.

      [19] Sang-Baeck Y, Jin H & Dong-Seok H, “A method of optimal design of single-sided linear induction motor for transitâ€, IEEE Trans. Magn., Vol.33, No.5, (1997), pp. 4215–4217.

      [20] Kitamura M, Hino N, Nihei H & Ito M, “A direct search shape optimization based on complex expressions of 2-dimensional magnetic fields and forcesâ€, IEEE Trans. Magn., Vol.34, No.5, (1998), pp.2845–2848.

      [21] Laporte B, Takorabet N & Vinsard G, “An approach to optimize winding design in linear induction motorsâ€, IEEE Trans. Magn., Vol.33, No.2, (1997), pp.1844–1847.

      [22] Zare Bazghaleh A, Naghashan MR & Meshkatoddini MR, “Optimum Design of Single-Sided Linear Induction Motors for Improved Motor Performanceâ€, IEEE Trans. Magn., Vol.46, No.11, (2010), pp.3939–3947.

      [23] Hu D, Xu W, “Electromagnetic Design Optimization of SingleSided Linear Induction Motor for Improved Drive Performance Based on Linear Metro Applicationâ€, Australasian Universities Power Engineering Conference, (2014).

      [24] Ravanji MH & Nasiri-Gheidari Z, “Design Optimization of a Ladder Secondary Single-Sided Linear Induction Motor for Improved Performanceâ€, IEEE Trans. Energy Convers., Vol.30, No.4, (2015), pp.1595–1603.

      [25] Shiri A & Shoulaie A, “End effect braking force reduction in high-speed single-sided linear induction machineâ€, Energy Convers. Manag., Vol.61, (2012), pp. 43–50.

      [26] Zayandehroodi H, Nasrabadian A & Anoosheh R, “Cuckoo Optimization Algorithm Based Design For Low-Speed Linear Induction Motorâ€, Özel Sayı Sci. J., Vol.36, No.6, (2015), pp.30–37.

      [27] Ali JA, Hannan MA, Mohamed A & Abdolrasol MGM, “Fuzzy logic speed controller optimization approach for induction motor drive using backtracking search algorithmâ€, Measurement, Vol.78, (2016), pp.49–62.

      [28] Ali JA, Hannan MA & Mohamed A, “PSO algorithm for Three Phase Induction Motor drive with SVPWM Switching and V/f Controlâ€, IEEE International Conference on Power and Energy (PECon), (2014), pp.250–254.

      [29] Abd Ali J, Hannan MA & Mohamed A, “Improved indirect field-oriented control of induction motor drive based PSO algorithmâ€, J. Teknol., Vol.78, No.6–2, (2016).

      [30] Abd Ali J, Hannan MA & Mohamed A, “Gravitational search algorithm based tuning of a PI speed controller for an induction motor driveâ€, IOP Conf. Ser. Earth Environ. Sci., Vol. 32, (2016).

      [31] Chiang CL & Su CT, “Tracking control of induction motor using fuzzy phase plane controller with improved genetic algorithmâ€, Electr. Power Syst. Res., Vol.73, No.2, (2005), pp.239–247.

      [32] Hannan MA, Ali JA, Mohamed A & Hussain A, “Optimization techniques to enhance the performance of induction motor drives: A reviewâ€, Renew. Sustain. Energy Rev., Vol.81, (2018), pp. 1611–1626.

      [33] Mahapatra S, Daniel R, Dey DN & Nayak SK, “Induction Motor Control Using PSO-ANFISâ€, Procedia Comput. Sci., Vol.48, (2015), pp. 753–768.

      [34] Rojas CA, Rodriguez JR, Kouro S & Villarroel F, “Multiobjective Fuzzy-Decision-Making Predictive Torque Control for an Induction Motor Driveâ€, IEEE Trans. Power Electron., Vol.32, No.8, (2017), pp.6245–6260.

      [35] Isfahani AH, Ebrahimi BM & Lesani H, “Design Optimization of a Low-Speed Single-Sided Linear Induction Motor for Improved Efficiency and Power Factorâ€, IEEE Trans. Magn., Vol.44, No.2, (2008), pp.266–272.

      [36] Raja CVN & Sudha KR, “Design, Analysis of Linear Induction Motor based on Harmony Search Algorithm and Finite Element Methodâ€, J. Eng. Sci. Technol. Rev., Vol.9, No.6, (2016), pp.189–195.

      [37] Lucas C, Nasiri-Gheidari Z & Tootoonchian F, “Application of an imperialist competitive algorithm to the design of a linear induction motorâ€, Energy Convers. Manag., Vol.51, No.7, (2010), pp.1407–1411.

      [38] Sijitha I & Dr. Poorani S, “A Review on Design of Single Sided Linear Induction Motor to Improve Performanceâ€, International Journal of Pure and Applied Mathematics., Vol.116, No.22, (2017), pp.109-125.

  • Downloads

  • How to Cite

    Issac, S., & Poorani, S. (2018). Optimal design selection and analysis of single sided linear induction motor. International Journal of Engineering & Technology, 7(2.21), 222-227. https://doi.org/10.14419/ijet.v7i2.21.12177

    Received date: 2018-04-26

    Accepted date: 2018-04-26

    Published date: 2018-04-20