Multi-input multi-output converter with battery charger for low power applications

  • Authors

    • S Pradeep Kumar
    • R Krishnakumar
    • E N.Ganesh
    2018-05-03
    https://doi.org/10.14419/ijet.v7i2.25.12372
  • DC Converter, Multiple – Input, Renewable Energy, Battery Charger.

  • Abstract

    For low power applications an integrated type multi- input multi- output converter with battery charger was presented in this paper. Power can be delivered from different sources with low power switching device using the proposed topology. The circuit model is designed to reduce the switching losses and to improve the converter overall efficiency by charging the battery using transformer leakage inductance. The input power distribution includes two input sources are operated by this converter model. This paper proposed a 20 –W prototype to test the converter performance and the experimental results are shown.

     

     

  • References

    1. [1] Chen, Y. C. Liu, and F. Y. Wu, “Multi-input DC/DC converter based on the multi-winding transformer for renewable energy applications,†IEEE Trans. on Ind. Appl., vol. 38, no.4, pp.1096-1104. Aug.2002.

      [2] Q. Wang, J. Zhang, X. Ruan, and K. Jin. “A Double- Input Flyback DC/DC Converter with Single Primary Winding†Energy Conversion Congress and Exposition, IEEE, 2010, pp.1938-1944.

      [3] Qian ZJ, Abdel-Rahman O and Batarseh I. “An Integrated Four- Port DC/DC Converter for Renewable Energy Applications,†IEEE Trans. Power Electron.,vol. 25, no: 7, pp. 1877-1887, Jul.2010.

      [4] N. Shanmugasundaram and S. Thangavel, “Modeling and Simulation Analysis of Power Cable aThree Level Inverter Fed Induction Motor Driveâ€, Journal ofComputational and Theoretical Nanoscience, Vol. 14, 972–978, 2017.

      [5] K.K.Saravanan and Dr. N. Stalin, “Design of three Phase Fifteen level cascaded Multilevel Inverter Using Embedded Controller “, International Journal of Applied Engineering Research, ISSN 0973-4562 Vol.10 No.72 (2015).

      [6] N. Shanmugasundaram and R. Vajubunnisa Begum, “Modeling and Simulation Analysis of Power Cables for a Matrix Converter Fed Induction Motor Drive (MCIMD), Jour of Adv Research in Dynamical & Control Systems, 11-Special Issue, November 2017.

  • Downloads

  • How to Cite

    Pradeep Kumar, S., Krishnakumar, R., & N.Ganesh, E. (2018). Multi-input multi-output converter with battery charger for low power applications. International Journal of Engineering & Technology, 7(2.25), 64-67. https://doi.org/10.14419/ijet.v7i2.25.12372

    Received date: 2018-05-03

    Accepted date: 2018-05-03

    Published date: 2018-05-03