New construction methodology-geothermal cogeneration plant efficiency improvements for environmental and economic sustainability using waste heat recovery system

  • Authors

    • J Prakash Arul Jose Research Scholar, Civil Engineering, Bharath University, Chennai, 600073, India.
    • P Rajesh Prasanna
    • Fleming Prakash
    2018-08-04
    https://doi.org/10.14419/ijet.v7i3.12623
  • Geo Thermal Cogeneration (CHP) Plant, CHP Plant Prime Movers, Fuel Cell Micro-CHP, Waste Heat Recovery System, Direct Electrical Conversion Devices.

  • Power station is used in geothermal cogeneration or Combined Heat and Power (CHP) plant to generate electric power and heat from a single process simultaneously. Industrial CHP gains attention due to its sustainability and its nature of carbon footprint reduction. In this regard, CHP is more effective than generating steam or burning fuel on-site, and electricity is imported from the grid. CHP is a combined system which finds applications in several techniques and thermal and fuel systems, and these functionalities can be integrated into prevail-ing building structures. In CHP, the modifications are carried out with respect to the energy and user requirements. In heat recovery mecha-nism of CHP plant, several critical parameters are required. The present research work focuses on heat recovery analysis in geothermal co-generation (CHP) plant, in which the methods to lessen the generated secondary (waste) heat is emphasized by enhancing energy efficiency. Further it also includes passive and active strategies. The recent trends of direct electric conversion devices are more useful, and therefore can be introduced in industrial waste heat recovery applications, which are usually applied in CHP or geothermal cogeneration plants includ-ing paper mills and chemical processing and refinery systems, hotels, hospitals, industries and commercial structures, where constant heat and power requirements exist.

     

     

  • References

    1. [1] Kai Yang, Hongguang Zhang, Songsong Song, Fubin Yang, Hao Liu, Guangyao Zhao, Jian Zhang and Baofeng Yao, “Effects of Degree of Superheat on the Running Performance of an Organic Rankine Cycle (ORC) Waste Heat Recovery System for Diesel Engines under Various Operating Conditionsâ€, Energies, Vol.7, No.4, (2014), pp.2123-2145, https://doi.org/10.3390/en7042123.

      [2] Sanghyo Lee, Baekrae Lee, Juhyung Kim and Jaejun Kim, “A Financing Model to Solve Financial Barriers for Implementing Green Building Projectsâ€, The Scientific World Journal, Vol.2013, (2013), pp.1-10, https://doi.org/10.1155/2013/240394.

      [3] S.K. Anwar Basha, “Waste Heat Recovery Power Plantâ€, International Journal & Magazine of Engineering, Technology, Management and Research, (2010).

      [4] N.A. Madlool, R. Saidur and N.A. Rahim, “Investigation of Waste Heat Recovery in Cement Industry:A Case Studyâ€, IACSIT International Journal of Engineering and Technology, Vol.4, No.5, (2012), pp.665-667, https://doi.org/10.7763/IJET.2012.V4.457.

      [5] Hadi Ghaebi, Amin Shekari Namin and Hadi Rostamzadeh, “Exergoeconomic Optimization of a Novel Cascade Kalina/Kalina Cycle using Geothermal Heat Source and LNG Cold Energy Recoveryâ€, Journal of Cleaner Production, (2018), https://doi.org/10.1016/j.jclepro.2018.04.049.

      [6] M.Poerner and A.Rimpel, “10 – Waste Heat Recovery, Fundamentals and Applications of Supercritical Carbon Dioxide (SCO₂) Based Power Cycles, 2017, pp. 255–267, https://doi.org/10.1016/B978-0-08-100804-1.00010-4.

      [7] Farkhondeh Jabari, Behnam Mohammadi-Ivatloo, Guiqiang Li and HasanMehrjerdi, “Design and Performance Investigation of a Novel Absorption Ice-Making System using Waste Heat Recovery from Flue Gases of Air to Air Heat Pumpâ€, Applied Thermal Engineering, Vol.130, (2018), pp.782-792, https://doi.org/10.1016/j.applthermaleng.2017.11.015.

      [8] Bin Hu, Hua Liu, R.Z.Wang, Hongbo Li, Zhiping Zhang and Sheng Wang, “A high-efficient centrifugal heat pump with industrial waste heat recovery for district heatingâ€, Applied Thermal Engineering, Vol.125, (2017), pp.359-365, https://doi.org/10.1016/j.applthermaleng.2017.07.030.

      [9] Rithy Kong, Thoranis Deethayat, Attakorn Asanakham and Tanongkiat Kiatsiriroat, “Heat Transfer Phenomena on Waste Heat Recovery of Combustion Stack Gas with Deionized Water in Helical Coiled Heat Exchangerâ€, Case Studies in Thermal Engineering, (2018), https://doi.org/10.1016/j.csite.2018.04.010.

      [10] Jingjing Chen, Jiajun Wu, Xiaoyan Ji, Xiaohua Lu and Changsong Wang, “Mechanism of waste-heat recovery from slurry by scraped-surface heat exchangerâ€, Applied Energy, Vol.207, (2017), pp.146-155, https://doi.org/10.1016/j.apenergy.2017.05.111.

      [11] SarahVan Erdeweghe, JohanVan Bael, BenLaenen and William D'haeseleer, “Optimal Combined Heat-and-Power Plant for a Low-Temperature Geothermal Sourceâ€, Energy, Vol.150, (2018), pp.96-409, https://doi.org/10.1016/j.energy.2018.01.136.

      [12] Jaakko Karvonen, Janni Kunttu, Tommi Suominen, Jyrki Kangas, Pekka Leskinen, and Jachym Judl, “Integrating Fast Pyrolysis Reactor with Combined Heat and Power Plant Improves Environmental and Energy Efficiency in Bio-Oil Productionâ€, Journal of Cleaner Production, Vol.183, (2018), pp.143-152, https://doi.org/10.1016/j.jclepro.2018.02.143.

      [13] Johan Karlsson, Lena Brunzell and G.Venkatesh, “Material-Flow Analysis, Energy Analysis, and Partial Environmental-LCA of a District-Heating Combined Heat and Power Plant in Swedenâ€, Energy, Vol.144, (2018), pp.31-40,. https://doi.org/10.1016/j.energy.2017.11.159.

      [14] Kang Hu, Lei Chen, Qun Chen, Xiao-Hai Wang, Jun Qi, Fei Xu, and Yong Min, “Phase-Change Heat Storage Installation in Combined Heat and Power Plants for Integration of Renewable Energy Sources into Power Systemâ€, Energy, Vol.124, (2107), pp.640-651, https://doi.org/10.1016/j.energy.2017.02.048.

      [15] Andrea L. Facci and Stefano Ubertini, “Analysis of a Fuel Cell Combined Heat and Power Plant under Realistic Smart Management Scenariosâ€, Applied Energy, Vol.216, (2018), pp.60-72, https://doi.org/10.1016/j.apenergy.2018.02.054.

      [16] M.H. Abbasi, H.Sayyaadi and M.A.Tahmasbzadebaie, “Methodology to Obtain the Foremost Type and Optimal Size of the Prime Mover of a CCHP System for A Large-Scale Residential Application, Applied Thermal Engineering, Vol.135, 2018, pp.389-405, https://doi.org/10.1016/j.applthermaleng.2018.02.062 ...

      [17] Skorek-Osikowska, J. Kotowicz and W. Uchman, “Thermodynamic Assessment of the Operation of a Self-Sufficient, Biomass based District Heating System Integrated with a Stirling Engine and Biomass Gasification, Energy, Vol.141, 2017, pp.141:1764-78, https://doi.org/10.1016/j.energy.2017.11.106.

      [18] A.H. Mamaghani, B. Najafi, A. Casalegno and f. Rinaldi, “Predictive Modelling and Adaptive Long-Term Performance Optimization of an HT-PEM Fuel Cell based Micro Combined Heat and Power (CHP) Plant†Applied energy, Vol.192, 2017, pp.519-29, https://doi.org/10.1016/j.apenergy.2016.08.050.

      [19] L. Shi, G. Shu, H. Tian, S. Deng, “A Review of Modified Organic Rankine Cycles (ORCs) for Internal Combustion Engine Waste Heat Recovery (ICE-WHR)â€, Renewable and Sustainable Energy Reviews, Vol.92, (2018) pp.95-110, https://doi.org/10.1016/j.rser.2018.04.023.

      [20] V. Chintala, S. Kumar and J.K. Pandey, “A Technical Review on Waste Heat Recovery from Compression Ignition Engines using Organic Rankine Cycle†Renewable and Sustainable Energy Reviews. Vol.81, 2018, pp.493-509, https://doi.org/10.1016/j.rser.2017.08.016.

      [21] Ung Lee and Alexander Mitsos, “Optimal Multicomponent Working Fluid of Organic Rankine Cycle for Energy Transfer from Liquefied Natural Gas Regasificationâ€, Energy, Vol.127, No.15, (2017), pp.489-501, https://doi.org/10.1016/j.energy.2017.03.126.

      [22] P.M. Diaz, “Analysis and Comparison of Different Types of Thermal Energy Storage Systems: A Reviewâ€, Journal of Advances in Mechanical Engineering and Science, Vol.2, No.1, (2016), pp.33-46, https://doi.org/10.18831/james.in/2016011004.

      [23] Yodha Y. Nusiaputra, Hans-Joachim Wiemer and Dietmar Kuhn, “Thermal-Economic Modularization of Small, Organic Rankine Cycle Power Plants for Mid-Enthalpy Geothermal Fieldsâ€, Energies, Vol.7, (2014), pp.4221-4240, https://doi.org/10.3390/en7074221.

      [24] Xiao-ping Bai and Xi-wei Zhang, “A Novel Evaluation Method for Building Construction Project Based on Integrated Information Entropy with Reliability Theoryâ€, The Scientific World Journal, Vol.2013, (2013), pp1-8, https://doi.org/10.1155/2013/573014.

      [25] K.P. Tyagi and M.N. Khan,†Effect of Gas Turbine Exhaust Temperature,Stack Temperature and Ambient Temperature on Overall Efficiency of Combine Cycle Power Plantâ€, International Journal of Engineering and Technology, Vol.2, No 6, (2010), pp.427-429.

      [26] Gabriela Huminic and Angel Huminic, Application of Nano Fluids in Heat Exchangers: A review, Renewable and Sustainable Energy Reviews, Vol. 16, No. 8, 2012, pp. 5625-5638, https://doi.org/10.1016/j.rser.2012.05.023.

      [27] Sonia L. Gomez-Alaez and Veronica Brizzi , “Dario Alfani, Paolo Silva, Andrea Giostri and Marco Astolfi, Off-Design Study of a Waste Heat Recovery ORC Module in Gas Pipelines Recompression Stationâ€, Energy Procedia, Vol.129, (2017), pp.567-574, https://doi.org/10.1016/j.egypro.2017.09.205.

      [28] M. Romero and J. Gonzalez-Aguilar, “7 – Next Generation of Liquid Metal and Other High-Performance Receiver Designs for Concentrating Solar Thermal (CST) Central Tower Systems, Advances in Concentrating Solar Thermal Research and Technologyâ€, A Volume in Woodhead Publishing Series in Energy, (2017), pp.129–154, https://doi.org/10.1016/B978-0-08-100516-3.00007-1.

      [29] Ajay Singh, Bireswar Paul, “Numerical Study of Convection Heat Transfer using Nanofluid in the Developing Region of a Tube Flowâ€, Journal of Advances in Mechanical Engineering and Science, Vol.1, No.3, (20150, pp.14-20,. https://doi.org/10.18831/james.in/2015031002.

      [30] Bahman Zohuri, “Thermal-Hydraulic Analysis of Nuclear Reactorsâ€, Springer, Cham, USA, (2017), pp.1-746, https://doi.org/10.1007/978-3-319-53829-7.

      [31] D.J.L. Brett, N.P. Brandon, A.D. Hawkes and I. Staffell, “Small and Micro Combined Heat and Power (CHP) Systemsâ€, Advanced Design, Performance, Materials and Applications, A volume in Woodhead Publishing Series in Energy, (2011), pp.233–261, doi:10.1533/9780857092755.2.23.

      [32] Alireza Haghighat Mamaghani, Behzad Najafi, Andrea Casalegno and Fabio Rinaldi: Predictive Modelling and Adaptive Long-Term Performance Optimization of an HT-PEM Fuel Cell Based Micro Combined Heat and Power (CHP) Plantâ€, Applied Energy, Vol.192, (2017), pp.519-529, https://doi.org/10.1016/j.apenergy.2016.08.050.

      [33] Niraj J.Patel, Azim Aijaz Mohammad and Hardik V.Mendpara, “Second Law of Thermodynamic Analysis of Congeneration Plantâ€, International Journal of Engineering & Technology, Vol.3, No.5, (2014), pp.126-132.

  • Downloads

  • How to Cite

    Prakash Arul Jose, J., Rajesh Prasanna, P., & Prakash, F. (2018). New construction methodology-geothermal cogeneration plant efficiency improvements for environmental and economic sustainability using waste heat recovery system. International Journal of Engineering & Technology, 7(3), 1679-1684. https://doi.org/10.14419/ijet.v7i3.12623