Elimination of the blinding effect in landscape luminaires

  • Authors

    • Albert Ashryatov
    • Dinara Churakova
    2018-04-15
    https://doi.org/10.14419/ijet.v7i2.13.12673
  • Secondary Optics, Light Distribution Diagram, Light Intensity Curve, LED, Flat Mirror Surface, Landscape Lamp

  • Abstract

    The article presents one of the possible options for implementing the lighting technology "Flat beam" for landscape lighting purposes. One of the possible ways to control the light distribution of a number of light sources based on LEDs with different radiation patterns is considered. As a secondary optics, it is proposed to use a mirror surface that redistributes the light flux of an LED light source. It is indicated that, depending on the initial type of the light-emitting diodes light curve and the features of mounting the mirror surface, the resulting light distribution can vary widely, depending on the initial task that the designer sets for himself.

     

     

  • References

    1. [1] Ashryatov AA, Churakova DK Influence of the mirror surface on the shape of the light intensity curve of light-emitting diodes // XLIV Ogaryov's readings: Conf.: in [3] parts. - Saransk: Mordov. State. Univ., 2016.-C. 58-62.

      [2] Ashryatov AA, Churakova DK, Frolov AA, Polikanov DS On the development of a model sample of a landscape lamp / / Materials of the XXI scientific and practical conference of young scientists, graduate students and students of the National Research Mordovian State University. N.P. Ogaryova: in three parts. - Saransk: Mordov Publishing House. Univ., 2017.

      [3] Churakova DK Investigation of the nature of the change in the light intensity curve of light-emitting diodes with different angles of radiation // Scientific works of SWorld: international periodical scientific publication - 2015.-â„– 3 (40). -FROM. 64-67.

      [4] Churakova DK On the possibility of using the "Flat ray" technology in landscape lighting // Problems and perspectives of development of domestic lighting, electrical engineering and power engineering: materials of the XII All-Russian scientific-technical. Conf. with intern. Participation in the framework of IV All-Russia. Lighting engineering. Forum. - 2017. - P. 176-180.

      [5] Churakova DK The influence of secondary optics on the lighting characteristics of light-emitting diodes // Proceedings of the XXth scientific-practical conference of young scientists, post-graduate students and students of the National Research Mordovian State University. N.P. Ogaryova: in [3] parts. - Saransk: Mordov Publishing House. Univ., 2016.-C. 181-185.

      [6] Orus LED: URL: http://www.thornlighting.ru/en-us/produkty/naruzhnoie-osvieshchieniie/osvieshchieniie-dorogh/Orus_LED 2. 3.

      [7] Reference book on lighting equipment / Ed. Yu.B.Aizenberg. Third ed. Pererab. In addition, additional. M.: Sign, 2006. - 972 p.

      [8] Thorn Lighting, Flat Beam® technology. [Electronic resource]. - URL: http://www.thornlighting.com from the screen.

      [9] Corresponding Author: Albert Ashryatov, Head of the Chair of light sources, Email: ashryatov@rambler.ru

  • Downloads

  • How to Cite

    Ashryatov, A., & Churakova, D. (2018). Elimination of the blinding effect in landscape luminaires. International Journal of Engineering & Technology, 7(2.13), 252-254. https://doi.org/10.14419/ijet.v7i2.13.12673

    Received date: 2018-05-10

    Accepted date: 2018-05-10

    Published date: 2018-04-15