Routing protocols for internet of things: a survey

  • Authors

    • Tamoghno Romario Bhattacharyya
    • Dr M. Pushpalatha
    2018-03-10
    https://doi.org/10.14419/ijet.v7i2.4.13038
  • RPL, Internet of Things, Wireless Sensor Networks

  • The world of wireless sensor network(WSN) is widening day by day and the latest technology in use the Internet of Things known as IOT is the latest craze in it. But the IOT technique and its devices requires routing protocols in situations like low power and lossy networks(LLNs) which brings great challenges. In many and some emergency cases, like in case of large and more data traffic which causes to lead in network congestions and also brings loss in packets and delay. In order to overcome all this problems , many group research and individuals are trying and focusing on different solutions to maximize the throughput for the RPL network. In this paper we will we studying and reviewing some of the different methods that has been taken to maximize the throughput in the network and hence try to come to a conclusion for the future techniques needed to be done.

     

     

  • References

    1. [1] Olfa Gaddour, Anis Koubaa, RPL in a nutshell: A survey, Computer Networks, 56(2012), 3163-3178.

      [2] Oana Iova, Gian Pietro Picco, Timofei Istomin, Csaba Kiraly, RPL, the Routing Standard for the Internet of Things… Or Is It? IEEE COMMUNICATIONS MAGAZINE, 2016, Volume: 54, Issue: 12, 16-22.

      [3] Hua-Mei Xin, Kun Yang, Routing Protocols Analysis for Internet of Things, second International Conference on Information Science and Control Engineering, 2015, 447-450.

      [4] Quan Le,Thu Ngo-Quynh,Thomaz Magedanz, RPL-based Multipath Routing Protocols for Internet of Things on Wireless Sensor Networks,International Conference on Advanced Technologies for Communications,2014,424-429.

      [5] Zhenfei Wang, Liying Zhang,Zhiyun Zheng,Junfeng Wang,An Optimized RPL Protocol for Wireless Sensor Networks, IEEE 22nd International Conference on Parallel and Distributed Systems,2016, 294-299.

      [6] Yad Tahir,Shusen Yang,Julie McCann, BRPL: Backpressure for High-Throughput and Mobile IoTs,IEEE Transactions on Mobile Computing, 2018,V olume:17, Issue:1,29-43.

      [7] Oana Iova,Fabrice Theoleyre,Thomas Noel,Using mutliparent routing in RPL to increase the stability and the lifetime of the network, AdHoc Networks, 2015,1-18.

      [8] Weisheng Tang,Xiaoyuan Ma,Jun Huang,Jianming Wei, Toward Improved RPL: A Congestion Avoidance Multipath Routing Protocol with Time Factor for Wireless Sensor Networks,Journal of Sensors, Volume 2016,Article ID 8128651, 11 Pages.

      [9] Ghada Glissa, Abederrezak Rachedi,Aref Meddeb, A Secure Routing Protocol Based on RPL for Internet of Things, IEEE Global Communications Conference, 2016, 1-7.

      [10] Hyung-Sin Kim,Hongchan Kim,Jeongyeup Paek,Saewoong Bahk,Load Balancing Under Heavy Traffic in RPL Routing Protocol for Low Power and Lossy Networks, IEEE Transactions on Mobile Computing,Volume.16,No.4,April 2017,964-979.

      [11] Hayder A. A. Al-Kashoash,Yaarob Al-Nidawi,Andrew H.Kemp,Congestion-aware RPL for 6LOWPAN Networks, Wireless Telecommunications Symposium,2016,1-6.

      [12] Weigao Xie,Mukul Goyal,Hossein Hosseini,Jerald Martocci,Yusuf Bashir,Emmanuel Baccelli,Arjan Durresi,Routing Loops in DAG-Based Low Power and Lossy Networks, 24th IEEE International Conference on Advanced Information Networking and Applications,2010,888-895.

      [13] Harith Kharrufa,Hayder Al-Kashoash,Yaarob Al-Nidawi, Maria Quezada Mosquera,A.H.Kemp, Dynamic RPL for Multi-Hop Routing in IoT Applications,13TH Annual Conference on Wireless On-demand Network Systems and Services,2017,100-103.

  • Downloads

  • How to Cite

    Romario Bhattacharyya, T., & M. Pushpalatha, D. (2018). Routing protocols for internet of things: a survey. International Journal of Engineering & Technology, 7(2.4), 196-199. https://doi.org/10.14419/ijet.v7i2.4.13038