A Review on Optimization of Vehicle Frontal Crashworthiness for Passenger Safety

  • Authors

    • Naveed Ahmed Khatri
    • Humaiz Shaikh
    • Zulfikar Ahmed Maher
    • Asadullah Shah
    • Syed Faiz Ahmed
    2018-06-08
    https://doi.org/10.14419/ijet.v7i2.34.13894
  • Crashworthiness, Frontal Impact, FRB, Overlap Collision, Optimization, Vehicle

  • Abstract

    In engineering and technology safety of human life has always been a top priority. With the increasing usage of vehicles in everyday life, probability of deaths and injuries has also increased. This paper provides a critical review on the optimization of vehicle frontal crashworthiness studied by researchers using various methods. They investigated the effects of crash at a defined speed using the method of FRB and ODB impact. It further discusses other methods that can be used to save passengers’ life. Also, the designing and manufacturing limitations faced by engineers in actual development processes. Finally, it is concluded that improved structure design and material composition can significantly increase the overall crashworthiness of the vehicle.

     

  • References

    1. [1] H. Mulla Salim, D. Yadv Sanjay, D. Shinde, and G. Deshpande, “Importance of federal motor vehicle safety standards 207/210 in occupant safety - A case study,†in Procedia Engineering, 2013, vol. 64, pp. 1099–1108.

      [2] X. Sen, Y. Jikuang, and Z. Zhihua, “Research and Optimization of Crashworthiness in Small Overlap Head-on Collision,†Fifth Conf. Meas. Technol. Mechatronics Autom., pp. 854–857, 2013.

      [3] G. R. Srinivas, A. Deb, R. Sanketh, and N. K. Gupta, “An Enhanced Methodology for Lightweighting a Vehicle Design Considering Front Crashworthiness and Pedestrian Impact Safety Requirements,†Procedia Eng., vol. 173, pp. 623–630, 2017.

      [4] P. Du Bois et al., Vehicle crashworthiness and occupant protection. 2004.

      [5] S. Huang and J. Dong, “Optimization Study of Vehicle Crashworthiness Based on Two Types of Frontal Impacts,†3rd Int. Conf. Transp. Inf. Saf., pp. 409–413, 2015.

      [6] X. Chen and J. Yang, “Optimization of longitudinal beam for improvement of crashworthiness in Frontal and Offset Impacts,†in Third International Conference on Digital Manufacturing & Automation, 2012, pp. 582–585.

      [7] F. Tarlochan and A. Faridz, “Sustainability design: Reduction of vehicle mass without compromizing crashworthiness,†in 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability, 2009, no. December, pp. 374–378.

      [8] Y. A. Abdel-Nasser, “Frontal crash simulation of vehicles against lighting columns using FEM,†Alexandria Eng. J., vol. 52, no. 3, pp. 295–299, 2013.

      [9] Q. Li and J. Yang, “Study of vehicle front structure crashworthiness based on pole impact with different position,†5th Conf. Meas. Technol. Mechatronics Autom., pp. 1031–1035, 2013.

      [10] Y. Zhu, L. Li, and J. Yang, “Frontal Structure Improvement on Car Based on RCAR Impact Test,†Third Int. Conf. Digit. Manuf. Autom., pp. 434–438, 2012.

      [11] S. Boria, G. Belingardi, and F. Giannoni, “A crashworthy problem on composite structures using a mathematical approach,†Procedia Eng., vol. 88, pp. 125–132, 2014.

      [12] A. T. Beyene, E. G. Koricho, G. Belingardi, and B. Martorana, “Design and manufacturing issues in the development of lightweight solution for a vehicle frontal bumper,†Procedia Eng., vol. 88, pp. 77–84, 2014.

      [13] E. Fechová, J. Kmec, A. Vagaská, and D. Kozak, “Material properties and safety of cars at crash tests,†Procedia Eng., vol. 149, no. June, pp. 263–268, 2016.

      [14] Ahmed, S. F. (2007, December). A new approach in Industrial automation application" Embedded system design for Injection Molding Machine". In Multitopic Conference, 2007. INMIC 2007. IEEE International (pp. 1-5). IEEE

      [15] Ahmed, S. F., Kushsairy, K., Bakar, M. I. A., Hazry, D., & Joyo, M. K. (2015, April). Attitude stabilization of Quad-rotor (UAV) system using Fuzzy PID controller (an experimental test). In Computing Technology and Information Management (ICCTIM), 2015 Second International Conference on (pp. 99-104). IEEE.

  • Downloads

  • How to Cite

    Ahmed Khatri, N., Shaikh, H., Ahmed Maher, Z., Shah, A., & Faiz Ahmed, S. (2018). A Review on Optimization of Vehicle Frontal Crashworthiness for Passenger Safety. International Journal of Engineering & Technology, 7(2.34), 1-4. https://doi.org/10.14419/ijet.v7i2.34.13894

    Received date: 2018-06-08

    Accepted date: 2018-06-08

    Published date: 2018-06-08