Competences of graduation for the curricular redesign of mechanical engineering based on local and national development agendas

  • Authors

    • E F Viera Facultad de Diseño, Arquitectura y Artes, Universidad Técnica de Ambato, Los Chasquis y Río Payamino. C.P. 18-01-0334. Ambato – Ecuador
    • M A Paucar Facultad de Diseño, Arquitectura y Artes, Universidad Técnica de Ambato, Los Chasquis y Río Payamino. C.P. 18-01-0334. Ambato – Ecuador
    • A Reinoso Department of Languages, Technical University of Ambato, Los Chasquis y Río Payamino. C.P. 18-01-0334. Ambato – Ecuador
    2018-09-05
    https://doi.org/10.14419/ijet.v7i4.14080
  • Curricular Design, Learning Achievements, CDIO.
  • This article proposes the implementation of CDIO (Conceive, Design, Implement and Operate) in the curricular redesign of the career of Mechanical Engineering. It presents a binding scheme of shared learning between the industry and academia to obtain graduate competencies, as a basis for curricular redesign. A new educational model is designed which allows the transition from know what to know how; interlacing the disciplines that intervene with skills and abilities to solve projects focused on local and national realities. It was defined that of the CDIO, standards 2, 3, 5 and 7 apply. This generates a student-centered curriculum with complementary disciplines, interlaced with inter and intra-personal skills, product manufacturing, processes and systems. This proposal considers specific knowledge, skills, values and attitudes that must be applied in the integral formation of Mechanical Engineers, in order to respond to the socio-productive needs of the country. Finally, the curricular redesign determines the areas of professional academic impact in Design, Energy, Materials and Production Management, taking into account the graduate competences and in a complementary way the learning results of the subjects of the career.

     

     

  • References

    1. [1] Times Higher Educations, "QS World University Rankings 2017-2018," 2017. [Online]. Available: https://www.topuniversities.com/university-rankings/world-university-rankings/2018. [Last access: December 15, 2017].

      [2] QS Ranking University, «QS Top Universities, » 2017. [Online]. Available: https://www.topuniversities.com/university-rankings/latin-american-university-rankings/2016. [Last access: December 14, 2017].

      [3] OAH Staffan Schedin, "Work integrated learning model in relation to CDIO standards," Journal of Applied Research in Higher Education, vol. 8, pp. 278 - 286, 2016. https://doi.org/10.1108/JARHE-11-2014-0104.

      [4] EMJ Ö. S. a. BD Crawley, Rethinking Engineering Education: The CDIO Approach., New York, NY: Springer, 2007.

      [5] A. Agherdien, "Shaping the learning environment of first-year students: combining collective space with collective learning," Journal of Applied Research in Higher Education, vol. 5, No. 2, pp. 239-251, 2013. https://doi.org/10.1108/JARHE-11-2012-0048.

      [6] LHYLZTLXLWMZJGHX Bai Jianfeng *, "The progress of CDIO engineering education reform in several China universities: A review," Proceedings: Social and Behavioral Sciences, vol. 16, pp. 381-385, 2013.

      [7] HJCW a. LM Dejun Tang, "The Practice Base Construction of Engineering Education Based on TOPCARES-CDIO Model," The Practice Base Construction of Engineering Education, vol. V, No. CCIS 235, pp. 328-333, 2011.

      [8] AR-TA Rodolfo Schmal, «A Methodology for Competency Oriented Curricula Design, » Ingeniare. Chilean Journal of Engineering, vol. 16, no. 2, pp. 147-158, 2008.

      [9] NGSSSC Makoto Nakayama, "The Implementation of a Competency-Based MSIS Curriculum," Journal of Information Systems Education, vol. 16, no. 3, pp. 301-309, 2005.

      [10] JJ Vásquez, "Scorecard for curriculum implementation by competencies for a university institution," Journal of Studies and Experiences in Education, vol. 13, no. 26, pp. 169-182, 2014.

      [11] National Secretariat of Planning and Development, «Regulatory Agenda for Productive Transformation, » SENPLADES, Quito, 2014.

      [12] YT HuiFang Lia, "Research on Personnel Training Model of Urban Rail Transit (URT) Information Management Major under Instruction of CDIO," Energy Proceia, vol. 16, pp. 1300-1304, 2012. https://doi.org/10.1016/j.egypro.2012.01.208.

      [13] National Government of the Republic of Ecuador, «National Plan of Good Living 2013 - 2017, » National Planning Council, Quito, 2013.

      [14] National Serareatry of Planning and Development, «National Development Plan 2017-2021, » SENPLADES, Quito, 2017.

      [15] Provincial Government of Tungurahua, «Provincial Development Agenda of Tungurahua 2015-2017, » Directorate of Planning, Ambato, 2015.

      [16] Z. Sari, "A New Curriculum for Manufacturing & Industrial Engineering and Engineering Management for BS and MS Degrees," Social Procedures and Behavioral Sciences, vol. 102, pp. 560-567, 2013. https://doi.org/10.1016/j.sbspro.2013.10.772.

      [17] Higher Education Commission of the Assembly - Ecuador, «Organic Law of Higher Education, » Official Registry, Quito, 2010.

      [18] Council of Higher Education (CES), «Regalemnto of Academic Regime,» Council of Higher Education (CES), Quito, 2017.

      [19] J. Ã. Vera-Noriega, "Theory and Method in Intercultural Curriculum Design by Competencies," Ra Ximhai, vol. 3, No. 2, pp. 397-416, 2007.

      [20] Vice Presidency of the Republic of Ecuador, "National Strategy for the Change of the Productive Strategy," Technical Secretariat of the Interinstitutional Committee for the Change of the Productive Matrix, Quito, 2015.

      [21] J. Carroll, "Replacing the Hierarchy of Engineering Qualifications and Roles," IEEE Global Engineering Education Conference (EDUCON), p. 557 - 563, 2017. https://doi.org/10.1109/EDUCON.2017.7942901.

      [22] RGH Anette Kolmos, "Response strategies for curriculum change in engineering," Int J Technol Des Educ, vol. 26, pp. 391 - 411, 2016. https://doi.org/10.1007/s10798-015-9319-y.

      [23] RP Ashish Kumar Parashara, "Innovations and Curriculum Development for Engineering Education and Research in India," Proceedings Social and Behavioral Sciences, vol. 56, pp. 685-690, 2012. https://doi.org/10.1016/j.sbspro.2012.09.704.

      [24] SKZML &. VA Maksimova, "Experience in the use of modern educational technologies in teaching professional disciplines of training direction" civil engineering ",» MATEC web of Conferences, nº 106 doi: 10.1051 / matecconf / 201710609020, 2017.

      [25] M. Gonzáles, "Curriculum based on competences: an experience in university education," Education and Educators, vol. 9, no. 2, pp. 95-117, 2006.

      [26] AS Schmal, "A Methodology for the Design of a Skills-Oriented Curriculum," Ingeniare, vol. 16, no. 2, pp. 147-158, 2008.

      [27] Rabiei, S. P., & Azarafza, R. “Investigate of Mechanical Fuse in Cardan Shaft Using FEM. Review of Informationâ€. Engineering and Applications, 1(1), 1-10., 2014. https://doi.org/10.18488/journal.79/2014.1.1/79.1.1.10.

      [28] Li, H., Zhao, Y., Song, S., & Nahmad, Y. “Comparison of ultrasound treatment with mechanical shearing for montmorillonite exfoliation in aqueous solutionsâ€. Journal of Minerals and Materials Research, 2(1), 1-12, 2015. https://doi.org/10.18488/journal.86/2015.2.1/86.1.1.12.

      [29] Ogah, A. O., & Englund, K. R. “Thermal, Mechanical and Rheological Properties of Agro Fiber Filled High Density Polyethylene Biocompositesâ€. International Journal of Chemistry and Materials Research, 4(2), 10-21, 2016. https://doi.org/10.18488/journal.64/2016.4.2/64.2.10.21.

      [30] Akram, H. M., & Khan, M. Z. “Selection of Appropriate Equipment for Designing Effective Vacuum Systemâ€. Review of Information Engineering and Applications, 2(2), 51-63, 2015. https://doi.org/10.18488/journal.79/2015.2.2/79.2.51.63.

      [31] Dagde, K. K., & Kpalap, E. K. “Computer Aided Design of a Multi-Component Distillation Column for Processing of Nigerian Bonny Light Crude Oilâ€. International Journal of Chemical and Process Engineering Research, 3(1), 10-22, 2016. https://doi.org/10.18488/journal.65/2016.3.1/65.1.10.22.

      [32] Vijiyan, G. “Current Trends in Software Engineering Researchâ€. Review of Computer Engineering Research, 2(3), 65-70, 2015.

      [33] Nair, S.M., Hanafi, Z & Yassin, S. M. “Do Preschool Teachers' Education Affect their Classroom Practices and Career Paths?â€. International Journal of Education and Practice, 5(6): 88-94, 2017. DOI: 10.18488/journal.61.2017.56.88.94

      [34] Sianturi, K., & Tampubolon, M. The Influence of Communication, Work Motivation and Career Development on Elementary School Teacher’s Job Performance in Medan, Indonesia. International Journal of Business, Economics and Management, 4(6), 124-135, 2017.

      [35] Purwito, A., & Muljono, P. “The Major Minor Curriculum Application in Preparing the Communication Science and Community Development Graduates to the World of Work: Graduates Perception (Case Study in Bogor Agricultural University, West Java, Indonesia)â€. Journal of Education and e-Learning Research, 4(3), 100-107, 2017.

      [36] Akuegwu, B. A., & Nwi-ue, F. D. “Providing Academic Leadership in Universities in Cross River State, Nigeria: Assessment of Departmental Heads' Effectivenessâ€. Asian Journal of Education and Training, 3(1), 18-24, 2017.

  • Downloads

  • How to Cite

    F Viera, E., A Paucar, M., & Reinoso, A. (2018). Competences of graduation for the curricular redesign of mechanical engineering based on local and national development agendas. International Journal of Engineering & Technology, 7(4), 1970-1976. https://doi.org/10.14419/ijet.v7i4.14080