Kinetic study of hydrolysis of ethyl acetate using caustic soda

  • Authors

    • Mostafa Ghobashy Department of Chemical Engineering, Faculty of Engineering, The British University in Egypt, Cairo, Egypt.
    • Mamdouh Gadallah Department of Chemical Engineering, Faculty of Engineering, Port Said University, Egypt.
    • Tamer T.El-Idreesy Department of Chemistry, Faculty of Science, Cairo University, Giza 12613, Egypt.
    • M. A.Sadek Department of Chemistry, The American University in Cairo, New Cairo 11835, Egypt.
    • Hany A.Elazab Department of Chemistry, The American University in Cairo, New Cairo 11835, Egypt
    2018-09-05
    https://doi.org/10.14419/ijet.v7i4.14083
  • Hydrolysis, Chemical Kinetics, Alkali, Ethyl Acetate, Reaction Rate

  • Abstract

    We report here, the hydrolysis of ethyl acetate by using caustic soda which is followed by means of conductance measurements which is widely used in chemical industry. The main aim of this research is to study the parameters of production of ethyl acetate by chemical reaction kinetics using an anion ion-exchange acting as a catalyst and acid-base titrations. The reaction of ethyl acetate and sodium hydroxide (caustic-soda) is done in a plug-flow reactor (steady-state tubular reactor) under the effect of different parameters including temperature, concentration and flow-rate, which allows the determination of activation energy and rate constants, due to large number of experiments. Factorial design method is used for the calculations of the experiment. It was determined that the order of the reaction is a second-order reaction.

     

     

  • References

    1. [1] Pierce O.R. and G. Gorin, Acid-catalyzed Hydrolysis of Ethyl Acetate. Journal of the American Chemical Society, 1953. 75(7): p. 1749-1750. https://doi.org/10.1021/ja01103a521.

      [2] Elazab, H., et al., Microwave-assisted synthesis of Pd nanoparticles supported on FeO, CoO, and Ni (OH) nanoplates and catalysis application for CO oxidation. Journal of Nanoparticle Research, 2014. 16(7): p. 1-11. https://doi.org/10.1007/s11051-014-2477-0.

      [3] Elazab, H., et al., The Effect of Graphene on Catalytic Performance of Palladium Nanoparticles Decorated with FeO, CoO, and Ni (OH): Potential Efficient Catalysts Used for Suzuki Cross-Coupling. Catalysis Letters. 147(6): p. 1510-1522. https://doi.org/10.1007/s10562-017-1990-z.

      [4] Elazab, H.A., et al., The continuous synthesis of Pd supported on Fe3O4 nanoparticles: A highly effective and magnetic catalyst for CO oxidation. Green Processing and Synthesis. 6(4): p. 413-424.

      [5] Elazab, H.A., M.A. Sadek, and T.T. El-Idreesy, Microwave-assisted synthesis of palladium nanoparticles supported on copper oxide in aqueous medium as an efficient catalyst for Suzuki cross-coupling reaction. Adsorption Science & Technology. 0 (0): p. 0263617418771777. https://doi.org/10.1177/0263617418771777.

      [6] Elazab, H.A., et al., Highly efficient and magnetically recyclable graphene-supported Pd/Fe3O4 nanoparticle catalysts for Suzuki and Heck cross-coupling reactions. Applied Catalysis A: General, 2015. 491: p. 58-69. https://doi.org/10.1016/j.apcata.2014.11.033.

      [7] Mankarious, R.A., et al., Bulletproof vests/shields prepared from composite material based on strong polyamide fibers and epoxy resin. Journal of Engineering and Applied Sciences.12 (10): p. 2697-2701.

      [8] Mohsen, W., M.A. Sadek, and H.A. Elazab, Green synthesis of copper oxide nanoparticles in aqueous medium as a potential efficient catalyst for catalysis applications. International Journal of Applied Engineering Research.12 (24): p. 14927-14930.

      [9] Mostafa, A.R., H.A.-S. Omar, and A.E. Hany, Preparation of Hydrogel Based on Acryl Amide and Investigation of Different Factors Affecting Rate and Amount of Absorbed Water. Agricultural Sciences. Vol.08No.02: p. 11.

      [10] Radwan, M.A., et al., Mechanical characteristics for different composite materials based on commercial epoxy resins and different fillers. Journal of Engineering and Applied Sciences. 12(5): p. 1179-1185.

      [11] Cheng, J.L., et al., Kinetic study of thermal- and impact-initiated reactions in Al-Fe (2) O (3) nanothermite. Combustion and Flame, 2010. 157 (12): p. 2241-2249. https://doi.org/10.1016/j.combustflame.2010.07.012.

      [12] Ermoline, A., M. Schoenitz, and E.L. Dreizin, Reactions leading to ignition in fully dense nanocomposite Al-oxide systems. Combustion and Flame, 2011. 158(6): p. 1076-1083. https://doi.org/10.1016/j.combustflame.2010.10.010.

      [13] Sanders, V.E., et al., Reaction propagation of four nanoscale energetic composites (Al/MoO3, Al/WO3, Al/CuO, and Bi2O3). Journal of Propulsion and Power, 2007. 23(4): p. 707-714. https://doi.org/10.2514/1.26089.

      [14] Elazab, H., et al., Microwave-assisted synthesis of Pd nanoparticles supported on FeO, CoO, and Ni (OH) nanoplates and catalysis application for CO oxidation. Journal of Nanoparticle Research, 2014. 16(7): p. 1-11.

      [15] Elazab, H., et al., The Effect of Graphene on Catalytic Performance of Palladium Nanoparticles Decorated with FeO, CoO, and Ni (OH): Potential Efficient Catalysts Used for Suzuki Cross-Coupling. Catalysis Letters. 147(6): p. 1510-1522.

      [16] Elazab, H.A., et al., The continuous synthesis of Pd supported on Fe3O4 nanoparticles: A highly effective and magnetic catalyst for CO oxidation. Green Processing and Synthesis. 6(4): p. 413-424.

      [17] Elazab, H.A., et al., Highly efficient and magnetically recyclable graphene-supported Pd/Fe3O4 nanoparticle catalysts for Suzuki and Heck cross-coupling reactions. Applied Catalysis A: General, 2015. 491 p. 58-69.

      [18] Mankarious, R.A., et al., Bulletproof vests/shields prepared from composite material based on strong polyamide fibers and epoxy resin. Journal of Engineering and Applied Sciences. 12(10): p. 2697-2701.

      [19] Mohsen, W., M.A. Sadek, and H.A. Elazab, Green synthesis of copper oxide nanoparticles in aqueous medium as a potential efficient catalyst for catalysis applications. International Journal of Applied Engineering Research.12 (24): p. 14927-14930.

      [20] Mostafa, A.R., H.A.-S. Omar, and A.E. Hany, Preparation of Hydrogel Based on Acryl Amide and Investigation of Different Factors Affecting Rate and Amount of Absorbed Water. Agricultural Sciences. Vol.08No.02: p. 11.

      [21] Radwan, M.A., et al., Mechanical characteristics for different composite materials based on commercial epoxy resins and different fillers. Journal of Engineering and Applied Sciences. 12(5): p. 1179-1185.

      [22] Kobayashi, T., Kanematsu, H., Hashimoto, R., Morisato, K., Ohashi, N., Yamasaki, H., & Takamiya, S. (2013). Study on Environment and Energy Using Belonging Materials. International Journal of Sustainable Development & World Policy, 2(4), 50.

      [23] Chan, Wu-Chung, and Hong-Siou Guo. "Preparation of a Poly (Vinylalcohol) (PVA)/Peat/Organoclay/Kno3 Composite Bead as Biofilter Material for Biofiltration of Volatile Organic Compounds." The International Journal of Biotechnology 3, no. 2 (2014): 24-31.

      [24] Nwufo, B. T., Priscila, A. U., & Onche, E. U. (2014). Production of Cost-Effective Adsorbents from Native Materials. International Journal of Chemistry and Materials Research, 2(4), 30-35.

      [25] El-Agez, T. M., El-Ghamri, H. S., Abdel-Latif, M. S., Taya, S. A., & Alkanoo, A. A. (2014). Thermoelectricity Based on Cuo as a Semiconducting Material. International Journal of Chemistry and Materials Research, 2(12), 166-173.

      [26] Murugadoss, K., & Pasupathi, G. (2015). Hardness Studies on Solution Grown Lithium Potassium Sulphate Single Crystals–An Inorganic Nonlinear Optical Material. International Journal of Chemistry and Materials Research, 3(1), 11-16.

      [27] B. Ashraf, M. A. Radwan, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 1295-1298.

      [28] H. A. Elazab Biointerface Research in Applied Chemistry, 8, 3314-3318.

      [29] H. A. Elazab Biointerface Research in Applied Chemistry, 8, 3278-3281.

      [30] H. A. Elazab, M. A. Radwan, T. T. El-Idreesy International Journal of Nanoscience, 2018.

      [31] H. A. Elazab, M. A. Sadek, T. T. El-Idreesy Adsorption Science & Technology, 36, 1352-1365.

      [32] N. S. Samir, M. A. Radwan, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 1290-1294.

      [33] Fatma Zakaria, M. A. Radwan, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 2018.

      [34] Reem Nasser, M. A. Radwan, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 2018.

      [35] Mostafa Ghobashy, Mamdouh Gadallah, Tamer T. El-Idreesy, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 2018.

      [36] H. A. Elazab, M. A. Sadek, Biointerface Research in Applied Chemistry, 8, 2018.

      [37] Hany A. Elazab, The Canadian Journal of Chemical Engineering, volume 96, issue 10, 2018.

  • Downloads

  • How to Cite

    Ghobashy, M., Gadallah, M., T.El-Idreesy, T., A.Sadek, M., & A.Elazab, H. (2018). Kinetic study of hydrolysis of ethyl acetate using caustic soda. International Journal of Engineering & Technology, 7(4), 1995-1999. https://doi.org/10.14419/ijet.v7i4.14083

    Received date: 2018-06-13

    Accepted date: 2018-07-10

    Published date: 2018-09-05