The Problem of Consideration Torsion Emergence in Beams

  • Authors

    • Sergiy Hudz
    • Grygorii Gasii
    • Volodymyr Pents
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14392
  • bimoment, critical load, lateral-torsional buckling, restraint, steel beam, torsion, warping stresses.

  • Abstract

    The calculation of the steel unrestrained and partially restrained roof beams with initial imperfections main stages is discussed. Restraining can be done by structures attached to the steel beams, namely, profiled flooring and discrete joints. On the basis of the new approach to the internal forces analysis and the geometric properties specification, the purpose was to find and describe the differences in the beam work as the part of roofing, which distinguishes it from the work conditions of the free supported beam. The features of the beam operation with the joint flexural and torsion are singled out. The need to improve the existing theoretical model for present deficiencies elimination is indicated. The bearing capacity determining methods for the flexible elements stability exposed to bending and bending with torsion are compared. Their advantages and disadvantages are revealed. It is proposed to increase the material saving by applying calculations. At the end of the article, conclusions regarding the consideration of investigated factors are given.

     

     

  • References

    1. [1] Balázs I. and Melcher J., Stability of Thin-Walled Beams with Lateral Continuous Restraint, Transactions of the VŠB–Technical University of Ostrava, Civil Engineering Series, 15(1), (2015), pp.1-10. https://doi.org/10.1515/tvsb-2015-0001

      [2] Put B.M., Pi Y.L. and Trahair N.S., Bending and torsion of cold-formed channel beams, Journal of Structural Engineering, 125(5), (1999), pp.540-546. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(540)

      [3] Pavlenko A.D., Rybakov V.A., Pikht A.V., Mikhailov E.S., Non-uniform torsion of thin-walled open-section multi-span beams, Inzhenerno-stroitel'nyy zhurnal, â„–7(67), (2016), pp:55-69, https://doi.org/10.5862/MCE.67.6

      [4] Kindmann R., Stahlbau, Teil 2: Stabilität und Theorie II. Ordnung. 4. Auflage, Berlin: Ernst & Sohn, (2008), 429 p, https://doi.org/10.1002/9783433600030

      [5] Kuhlmann U., Stahlbau-Kalender 2009: Schwerpunkt – Stabilität, Berlin: Ernst & Sohn, (2009), 1032 p.

      [6] Wagenknecht G. Stahlbau-Praxis nach Eurocode 3: Band 1 Tragwerksplanung, Grundlagen, Berlin: Beuth Verlag GmbH, (2011), 396 p.

      [7] Vlasov V.Z., Tonkostennyye uprugiye sterzhni, M.: Gosizdat, Fizmatgiz – matematicheskoy literatury, (1959), 568 p.

      [8] Bychkov D.V., Stroitel'naya mekhanika sterzhnevykh tonkostennykh konstruktsiy, M.: Gosstroyizdat, (1962), 476 p.

      [9] Tusnin A.R., Prokich M., Rabota simmetrichnykh dvutavrovykh secheniy pri razvitii plasticheskikh deformatsiy i deystvii izgibayushchego momenta i bimomenta, Inzhenerno-stroitel'nyy zhurnal, â„–5(49), (2014), pp:44-53, https://doi.org/10.5862/MCE.49.5

      [10] Tusnin A.R., Prokich M., Eksperimental'nyye issledovaniya raboty balok dvutavrovogo secheniya pri deystvii izgiba i krucheniya, Inzhenerno-stroitel'nyy zhurnal, â„–1, (2015), pp:24-31, https://doi.org/10.5862/MCE.53.3

      [11] Selyantsev I.M., Eksperimental'naya otsenka vliyaniya deformatsii kontura poperechnogo secheniya na rabotu tonkostennykh sterzhney otkrytogo profilya, Nauchno-tekhnicheskiy vestnik Povolzh'ya, (6), (2012), pp:370-373.

      [12] Kindmann R. and Kraus M., Steel structures: Design using FEM, John Wiley & Sons, (2011), pp:168-216, https://doi.org/10.1002/9783433600771.ch5

      [13] Pilkey W.D., Analysis and design of elastic beams: Computational methods, John Wiley & Sons, (2002), pp:312-368, https://doi.org/10.1002/9780470172667.ch7

      [14] Trahair N.S., Bradford M.A., Nethercot D.A. and Gardner L., The behaviour and design of steel structures to EC3, CRC Press, (2007), pp:227-294.

      [15] Martin L. and Purkiss J., Structural Design of Steelwork to EN 1993 and EN 1994, CRC Press, (2007), pp:35-174.

      [16] Galambos T.V. and Surovek A.E., Structural stability of steel: concepts and applications for structural engineers, John Wiley & Sons, (2008), pp:236-289, https://doi.org/10.1002/9780470261316.ch6

      [17] Krahwinkel M., Zur Beanspruchung stabilisierender Konstruktionen im Stahlbau, Fortschritt-Berichte VDI, Reihe 4 Bauingenieurwesen, Nr. 166, Düsseldorf: VDI-Verlag, (2001), 182 p.

      [18] Hudz S.A., Nesucha zdatnistʹ stalevykh dvotavrovykh balok, shcho ekspluatuyutʹsya z nedoskonalostyamy u vyhlyadi pochatkovykh vykryvlenʹ u ploshchyni naymenshoyi zhorstkosti, Visnyk Odesʹkoyi derzhavnoyi akademiyi budivnytstva ta arkhitektury, Vyp. № 61, Odesa: Zovnishreklamservis, (2016), pp:95-101.

      [19] Hudz S.A., Hasenko A.V., Vplyv zhorstkosti pryyednanykh konstruktsiy na stiykistʹ balok, Zb. nauk. pratsʹ: Shlyakhy pidvyshchennya efektyvnosti budivnytstva v umovakh formuvannya rynkovykh vidnosyn, Vyp. 35, Tekhnichnyy, K.: KNUBA, (2018), pp:114-123.

      [20] G. Gasii, O. Hasii, and O. Zabolotskyi, Estimate of technical and economic benefits of a new space composite structure. MATEC Web of Conferences, Vol. 116, (2017), pp. 02014, https://doi.org/10.1051/matecconf/201711602014

      [21] Kindmann R. and Ludwig C., Plastische Tragfähigkeit von gewalzten und geschweißten I-Querschnitten, Stahlbau, 83(12), (2014), pp:890-904, https://doi.org/10.1002/stab.201410223

      [22] Tata Steel, Steel building design: design data, The Steel Construction Institute and The British Constructional Steelwork Association Limited, (2013), 690 p.

      [23] Storozhenko, L., Butsky, V., Taranovsky, O. Stability of Compressed Steel Concrete Composite Tubular Columns with Centrifuged Cores // Journal of constructional steel research; 46, 1/3; 484; Second World Conference on Steel in Construction ; 1998.

      [24] Piskunov, V.G., Gorik, A.. & Cherednikov, V.N. Mechanics of Composite Materials (2000) 36: 445. https://doi.org/10.1023/A:1006798314569

      [25] Kochkarev D. Calculation methodology of reinforced concrete elements based on estimated resistance of reinforced concrete / D. Kochkarev, T. Galinska // Matec Web of Conferences 116, 02020 (2017), Materials science, engineering and chemistry, Transbud–2017, Kharkiv, Ukraine, April 19–21, 2017. https://doi.org/10.1051/matecconf/201711602020

  • Downloads

  • How to Cite

    Hudz, S., Gasii, G., & Pents, V. (2018). The Problem of Consideration Torsion Emergence in Beams. International Journal of Engineering & Technology, 7(3.2), 141-148. https://doi.org/10.14419/ijet.v7i3.2.14392

    Received date: 2018-06-19

    Accepted date: 2018-06-19

    Published date: 2018-06-20