The Fracture Process of the Mortar Pump’s Work Surfaces with Abrasive Particles

  • Authors

    • Roman Kaczynski
    • Oleksiyvasyliev .
    • Ievgen Vasyliev
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14394
  • Mortar pump, abraser wear, wear rate, material performance.

  • Using the example of a mortar pump with a flow-through plug the authors of the article offer a mathematical model of the fracture process of the mortar pump’s work surfaces under the action of abrasive sand particles. The influence of different factors, material properties and conditions of wearing on the wear rate are analyzed in this research paper.

     

     

  • References

    1. [1] Pavelieva, A., Vasyliev, I., Popov, S., & Vasyliev, A. (2017). The analysis of running efficiency of valve units in differential mortar pump. Technology Audit and Production Reserves, 5(1(37)), 4–9. DOI: 10.15587/2312-8372.2017.112351.

      [2] Korobko B. (2016), Investigation of energy consumption in the course of plastering machine’s work, Eastern-European Journal of Enterprise Technologies, 4/8 (82), 4 – 11. DOI: 10.15587/1729-4061.2016.73336.

      [3] Vinogradov V. N., Sorokin G. M., Kolokolnikov M. G. (1990), Abrazivnoe iznashivanie. M.: Mashinostroenie, 24.

      [4] Surface engineering combats friction and wear. (2013). World Pumps, 2013(7-8), 8–10. DOI: 10.1016/s0262-1762(13)70205-0.

      [5] Antonov, M., & Hussainova, I. (2010). Cermets surface transformation under erosive and abrasive wear. Tribology International, 43(8), 1566–1575. DOI: 10.1016/j.triboint.2009.12.005.

      [6] Rastegar, V., & Karimi, A. (2013). Surface and Subsurface Deformation of Wear-Resistant Steels Exposed to Impact Wear. Journal of Materials Engineering and Performance, 23(3), 927–936. DOI: 10.1007/s11665-013-0842-2.

      [7] Zhao, C. R., Jiang, J. H., & Ke, C. (2015). Wear Testing of Principal Friction Pairs in Axial Piston Pump Based on Taguchi Design Method. Applied Mechanics and Materials, 779, 26–34. DOI: 10.4028/www.scientific.net/amm.779.26.

      [8] Khebdy M., Chichinadze A. V. (1989), Spravochnik po tribotekhnike. M.: Mashinostroenie.

      [9] Sun, Y. (2013). Sliding wear behaviour of surface mechanical attrition treated AISI 304 stainless steel. Tribology International, 57, 67–75. DOI: 10.1016/j.triboint.2012.07.015.

      [10] Braun E. D., Evdokimov Yu. A., Chichinadze A. V. (1982), Modelirovanie treniia I iznashivaniia v mashinakh. M.: Mashinostroenie, 191.

      [11] Arulbrittoraj, A., Duraiselvam, M., & Padmanabhan, P. (2017). Sliding wear of AISI1040 steel at different thermo chemical surface treated conditions. International Journal of Surface Science and Engineering, 11(6), 531. DOI: 10.1504/ijsurfse.2017.10010005.

      [12] Korobko B., Vasyliev Ie. (2017) Test method for rheological behavior of mortar for building work. Acta mechanica et automatica, 11/3 (41), 173 – 177. DOI: 10.1515/ama-2017-0025.

      [13] Fan, Y., Zhang, R. H., & Chen, Z. B. (2013). Research on the Properties of Sea Sand Mortar. Applied Mechanics and Materials, 405-408, 2871–2875. DOI: 10.4028/www.scientific.net/amm.405-408.2871.

      [14] Wang G.L., Ma M.L., Miao D.M., Ma H.J. (2014). Pump Ability of Concrete Mixture Improvement Based on Rich Mortar Theory Testing Method. Applied Mechanics and Materials, 472, 704 – 707. DOI: 10.4028/www.scientific.net/AMM.472.704.

  • Downloads

  • How to Cite

    Kaczynski, R., ., O., & Vasyliev, I. (2018). The Fracture Process of the Mortar Pump’s Work Surfaces with Abrasive Particles. International Journal of Engineering & Technology, 7(3.2), 154-159. https://doi.org/10.14419/ijet.v7i3.2.14394