Effective Structural System for the Affordable Housing Construction

  • Authors

    • Andrii Pavlikov
    • Serhii Mykytenko
    • Anton Hasenko
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14422
  • flat plate ceiling, reinforced concrete framework building, low-cost housing beam.

  • Abstract

    This article falls within vital question in quickly builds construction – theoretical method for calculating the slabs and columns of such buildings. Calculation research of buildings with reinforced concrete frame slabs is described in the article. The features of work the collapsible flat plate ceiling in composition of reinforced concrete framework of building are analyzed. Problems in the design of framework building are considered in order to increase its reliability. The suggestions for directions of perfection the calculation of flat plate frame construction elements are proposed in the article. The novelty of this work is to get new theoretical data about bearing capacity and deformability of structural system for the affordable housing construction from reinforced concrete.

     

     

  • References

    1. [1] Pavlikov, A. M. Bezkapitelno-bezbalkova karkasno-konstruktyvna systema budivli: osoblyvosti ta dosvid vykorystannya pid dostupne zhytlo / A.M. Pavlikov, YE.M. Babych, B.M. Petter // Budivelni konstruktsiyi: mizhvidomchyy naukovo-tekhnichnyy zbirnyk naukovykh pratsʹ (budivnytstvo) / DP DND IBK. – Issue 78: in 2 books. Book 1. - Kyiv: DP NDIBK, 2013. - pp. 28 - 46.

      [2] What is "KUB-2.5", available online: http://zavod-zhhi.com.ua.

      [3] Description of the system according to the information of the NGO "KUB", available online: http://kub-invest.ru/sist.html.

      [4] Description of the system "KUB-2,5", available online: http://www.pi2.ru.

      [5] Unifitsirovannaya sistema sborno-monolitnogo bezrigel'nogo karkasa. Osnovnyye polozheniya po raschetu, montazhu i komponovke zdaniy: a working project in 9 editions. The series "KUB-2,5". Issue 1-1. / Firm "KUB" JV "IN-EX", Scientific-design and construction association of monolithic housing construction (NSPO "MONOLIT"). - Moscow: 1990. - 49 p.

      [6] Dorfman, A.E. Proyektirovaniye bezbalochnykh beskapitel'nykh perekrytiy / A.E. Dorfman, L.N. Levontin. – Moscow: Stroiizdat, 1975. -124 p.

      [7] Shuenn-Yih Chang, Experimental Studies of Reinforced Concrete Bridge Columns under Axial Load Plus Biaxial Bending, Journal of Structural Engineering, Vol. 136, No 1(12), (2010), pp. 12-18, https://doi.org/10.1061/(ASCE)0733-9445(2010)136:1(12).

      [8] L. Pallarés, J.L. Bonet, P.F. Miguel, M.A. Fernández Prada, Experimental research on high strength concrete slender columns subjected to compression and biaxial bending forces, Engineering Structures, Vol. 30, No 7, (2008), pp. 1879-1894, https://doi.org/10.1016/j.engstruct.2007.12.005.

      [9] J.L. Bonet, M.L. Romero, P.F. Miguel, Effective flexural stiffness of slender reinforced concrete columns under axial forces and biaxial bending, Engineering Structures, Vol. 33, No. 3, (2011), pp. 881-893, https://doi.org/10.1016/j.engstruct.2010.12.009.

      [10] Piskunov, V.G. Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads / V.G. Piskunov, A.V. Goryk, V.N. Cherednikov // Mechanics of Composite Materials. – Volume 36, Issue 4, July 2000, Pages 287-296.

      [11] Bishnu P. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions [Text] / P. G. Bishnu, K. P. Daman // Materials and Structures. – 2016. – Vol. 49 (9). – pp. 3409-3508. – doi: 10.1617/s11527-015-0734-z.

      [12] J.L. Bonet, M.H.F.M. Barros, M.L. Romero, Comparative study of analytical and numerical algorithms for designing reinforced concrete sections under biaxial bending, Computers & Structures, Vol. 84, No. 31-32, (2006), pp. 2184-2193, https://doi.org/10.1016/j.compstruc.2006.08.065.

      [13] Hasenko A.V. Causes of the eccentric compression reinforced concrete elements fixed joint stanchion and rafter gable frame of agricultural buildings / A.V. Hasenko, I.A. Yurko, O.G. Fenko, P.A. Yurko // The International Scientific Periodical Journal "Modern Technology and Innovative Technologies". – Germany: Karlsruhe, 2017. – Issue №2, Vol.2. – pp. 126 – 129. – doi: 10.21893/2567-5273.2017-02-02-033.

      [14] Jin-Keun Kim, Sang-Soon Lee, The behavior of reinforced concrete columns subjected to axial force and biaxial bending, Engineering Structures, Vol. 22, No. 11, (2000), pp. 1518-1528, https://doi.org/10.1016/S0141-0296(99)00090-5.

  • Downloads

  • How to Cite

    Pavlikov, A., Mykytenko, S., & Hasenko, A. (2018). Effective Structural System for the Affordable Housing Construction. International Journal of Engineering & Technology, 7(3.2), 291-298. https://doi.org/10.14419/ijet.v7i3.2.14422

    Received date: 2018-06-20

    Accepted date: 2018-06-20

    Published date: 2018-06-20