The Stress-Strain State Computer Modelling of Reinforced Masonry Under Local Loading

  • Authors

    • Nataliia Pinchuk
    • Oleksiy Fenko
    • Volodymyr Kyrychenko
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14427
  • numerical computer modelling, reinforced masonry, stress concentration.
  • Reinforced masonry elements stress-strain state modelling allows to define places in which stresses and strains are maximum. It is
    necessary to pay special attention to these places during experimental investigation. Accepted models of structures are adequate and
    corresponded to real constructions. Using computer modelling by the finite element method, the finite element size influence on the
    calculation accuracy is determined. The necessary resources of a personal computer to create and calculate such a model are sufficient and suitable for studying modelled structures stress-strain state. Good convergence of the deformations obtained from the resistive-strain sensors during the experimental investigations and according to the numerical modelling results is received.

     

     

  • References

    1. [1] Zenkevich OS, Chang I. The method of finite elements in the theory of constructions and in the mechanics of continuous medium, 238 P. M.: Nedra (1974).

      [2] Gasenko AV, Pigug OV, Magan IV: Modelling of the stress-strain state of the unassembled units of a monolithic reinforced concrete slab with steel-ton columns. SNAU Bulletin. Series: Construction, vol. 11 (14), pp. 53-60. Sumy (2010).

      [3] Grinev VV. Analysis of strained-deformed state when compressing masonry from vibropressed concrete, cavernous stones using computer modelling. Zb sciences пр. "Resource-saving materials, constructions, buildings and structures", vol. 15, pp. 142-149. Rivne: NUVHtaP (2007).

      [4] Musinova V, Ts. MSC / NASTRAN. User's Guide. - The MacNeal-Schwendler Corporation, 188 R. (1995).

      [5] Dovzhenko OO, Pinchuk NM Strength of reinforced masonry under local loading, Technical sciences, from theory to practice, 2012. – Vol. 8, – P. 136-142.

      [6] Hasenko AV, Yurko IA, Fenko OG., Yurko PA Causes of the eccentric compression reinforced concrete elements fixed joint stanchion and rafter gable frame of agricultural buildings // The International Scientific Periodical Journal "Modern Technology and Innovative Technologies". – Germany: Karlsruhe, 2017. – Issue №2, Vol.2. – pp. 126 – 129. – DOI: 10.21893/2567-5273.2017-02-02-033.

      [7] Semko OV, Gasenko AV, Lazarev DM, Avramenko YuO Features of modelling of the stress-strain state of light steel thin-walled structures // Bulletin of DNUZT named after academician V. Lazaryan. - Dnipropetrovsk, 2011. - Vip. 39. - P. 191 - 194.

      [8] Beicha D. Effective transverse elastic properties of unidirectional fiber reinforced composites [Text] / D. Beicha, T. Kanit, Y. Brunet, A. Imad, A. E. Moumen, Y. Khelfaoui // Mechanics of Materials. – 2016. – Vol. 102. – pp. 47-53. – DOI: 10.1016/j.mechmat.2016.08.010.

      [9] Bishnu P. A new method of applying long-term multiaxial stresses in concrete specimens undergoing ASR, and their triaxial expansions [Text] / P. G. Bishnu, K. P. Daman // Materials and Structures. – 2016. – Vol. 49 (9). – pp. 3409-3508. – DOI: 10.1617/s11527-015-0734-z.

      [10] Rychkov SP Modelling of Constructions in the Femap with NX Nastran. - M.: DMC Press, 2013. - 784 p.

      [11] Dębski H, Koszałka G, Ferdynus M Application of fem in the analysis of the structure of a trailer supporting frame with variable operation parameters // Eksploatacja i Niezawodnosc – Maintenance and Reliability. 2012. – Vol. 14, № 2 – P. 107 – 114.

      [12] Piskunov VG, Gorik A, Cherednikov VN Modeling of Transverse Shears of Piecewise Homogeneous Composite Bars Using an Iterative Process with Account of Tangential Loads. 2. Resolving Equations and Results Mechanics of Composite Materials November 2000, Vol. 36, Issue 6, pp 445–452 https://doi.org/10.1023/A:1006798314569

  • Downloads

  • How to Cite

    Pinchuk, N., Fenko, O., & Kyrychenko, V. (2018). The Stress-Strain State Computer Modelling of Reinforced Masonry Under Local Loading. International Journal of Engineering & Technology, 7(3.2), 316-321. https://doi.org/10.14419/ijet.v7i3.2.14427