Design and Simulation of Compact Band-Pass Filter Using Stub Loaded Plasmonic Mim Waveguide

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    In this article, plasmonic band-pass filters (BPF) have been studied and numerically analyzed. This filter has been designed based on the two-stubs. Pass-band can be realized by appropriately adjusting the lengths and width of the resonator. Based on the ideal characteristics of the proposed two stubs BPF is allowing the band at THz frequencies. Multiple transmission zeros are generated to improve the selectivity of the filter. All simulated results have been studied using CST Microwave studio suite. Usually, the transmission effectiveness is revealed by the exact resonance condition, whichwill confirmalong with the numerical simulation or theoretical analysis.  This article delivers a promising application for plasmonic BPFsin addition to plasmonic integrated circuits (PICs).

     

     


  • Keywords


    MIMSIR,SPP,BPF,PLASMONICS,PIC

  • References


      [1] [1] W. Mu and J. B. Ketterson, “Long-range surface plasmonpolaritons propagating on a dielectric waveguide support,” Opt. Lett., vol. 36, no. 23, pp. 4713-4715, Dec. 2011.

      [2] [2] W. Liu, R. Zhong, J. Zhou, Y. Zhang, and M. Hu, “Investigations on a nano-scale periodical waveguide structure taking surface plasmonpolaritons into consideration,” J. Phys. D: Appl. Phys. vol. 45, no. 20, pp. 205104 (1-9), May 2012.

      [3] [3] P. Taylor, C. Li, D. Qi, J. Xin, and F. Hao, “Metal-insulator-metal plasmonic waveguide for low- distortion slow light at telecom frequencies,” J. Modern Opt. Vol. 61, no. 8, pp. 37-41, Nov.2014.

      [4] [4] Jin Tao, Xu G. H, X Lin, Qin Zhang, and Xiaopin Jin,“A narrow-band subwavelengthplasmonic waveguide filter with asymmetrical multipleteeth-shaped structure,” OPT. EXP.Vol. 17, No. 16, pp.13989-13994, Aug. 2009

      [5] [5] B. H. Cheng, Y. Lai, and Y. Lan, “Plasmonic Photonic Bloch Oscillations in Composite Metal -Insulator -Metal Waveguide Structure,” Plasmonics, vol. 9, no. 1, pp. 137-142, Jul. 2013.

      [6] [6] G. Veronis, S. Fan, and S. Member, “Modes of SubwavelengthPlasmonic Slot Waveguides,” J. Lightwave Tech., vol. 25, no. 9, pp. 2511-2521, Sept. 2007.

      [7] [7] A. Hosseini, A. Nieuwoudt, and Y. Massoud, “Efficient simulation of subwavelengthplasmonic waveguides using implicitly restarted Arnoldi,” Opt. Express, vol. 14, no. 16, pp. 487-494, Aug. 2006.

      [8] [8] C. L. C. Smith, N. Stenger, A. Kristensen, and N. A. Mortensen, “Gap and channeled plasmons in tapered grooves : a review,” The Royal Soc.Chem., vol. 7, no. 21, pp. 79-82, Apr. 2015.

      [9] [9] G. Veronis, S. Fan, G. Veronis, and S. Fan, “Bends and splitters in metal-dielectric-metal subwavelengthplasmonicwaveguides ,” Appl. Phy. Lett. , vol. 87, , pp. 131102(1-4), Apr. 2005.

      [10] [10] S. Randhawa et al., “Experimental demonstration of dielectric-loaded plasmonic waveguide disk resonators at telecom wavelengths ,” Appl. Phy. Lett. , vol. 98, , pp. 161102 (1-3), Apr. 2011.

      [11] [11] X. Xiong et.al, “Broad band plasmonic absorber for photonic integrated circuits,” IEEE Photn, Tech. Lett.Vol.26, No. 17, pp. 1726-1729, 2014.

      [12] [12] H. Lu, X. Liu, Y. Gong, L. Wang, and D. Mao, “Multi-channel plasmonic waveguide filters with disk-shaped nanocavities,” Opt. Commun., vol. 284, no. 10–11, pp. 2613-2616, Feb. 2011.


 

View

Download

Article ID: 14482
 
DOI: 10.14419/ijet.v7i3.3.14482




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.