Theoretical Studies of Stresses in a Layer of a Light-Concrete Mixture, Which is Compacted on the Shock-Vibration Machine

  • Authors

    • Mykola Nesterenko
    • Tetyana Nesterenko
    • Taras Skliarenko
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14564
  • shock-and-vibration machine, light concrete mix, compaction of the concrete mixture, stress in the layer of concrete mix.
  • Abstract

    The article presents the design of shock-and-vibration machine for the formation of lightweight concrete products. The results of theoretical studies of the working process of the shock-and-vibration machine with the definition of motion and stress laws in a layer of a concrete mixture compacted in the kinematic excitation of oscillations are given.

    In paper the dependences for determining the reduced mass and the equivalent coefficient of inelastic resistance of a concrete mixture with asymmetric kinematic excitation of oscillations during the vibration seal are given. The practical application of the obtained results is offered.

     

     
  • References

    1. [1] I.I. Nazarenko, Vibratsiyni mashyny i protsesy budivelʹnoyi industriyi, KNUBA, Kyiv, 2007, 230s. ISBN 978-966-627-134-7.

      [2] Korobko BO, “Investigation of energy consumption in the course of plastering machine’s workâ€, Eastern-European Journal of Enterprise Technologies, Vol. 4/8 (82), (2016), ss. 4–11. https://doi.org/:10.15587/1729-4061.2016.73336.

      [3] I.I. Blekhman, Vibratsionnaya mekhanika, Fizmatlit, Moskva, 1994, 400 s.

      [4] P.P. Deryabin, V.F. Zavadskiy, A.F. Kosach, V. A. Popov, Tekhnologiya stroitel'nykh izdeliy iz yacheistykh betonov, SibADI, Omsk:, 2004, 108 s.

      [5] YU.M. Bazhenov, Tekhnologiya betona, ASV, Moskva, 2003, 500 s.

      [6] Zhigiliy SM, “Primeneniye kriteriyev podobiya pri matematicheskom modelirovnii tekhnologicheskoy vibromashinyâ€, Voprosy vibratsionnoy tekhnologii, Vol. 1, (2006), ss.163-166.

      [7] Nazarenko II, Ruchynsʹkyy MM, Terenchuk SA, “Doslidzhennya rezhymnykh ta enerhetychnykh kharakterystyk prohresyvnykh vibromashynâ€, Visnyk NTUU «KPI», Vol. 63, (2011), ss.214-218. https://doi.org/10.20535/2305-9001.2011.63.58587.

      [8] Nazarenko II, Svidersʹkyy ÐТ, Dyedov ОР, “Stvorennya vysokoefektyvnykh vibroushchilʹnyuyuchykh mashyn novoho pokolinnyaâ€, Visnyk NTUU «KPI», Vol. 63, (2011), ss.219-223. https://doi.org/10.20535/2305-9001.2011.63.58753.

      [9] AH Maslov, Zhanar Bat·saykhan, “Opredelenye ratsyonalʹnykh parametrov vybroudarnoho rabocheho orhana dlya uplotnenyya betonnykh smeseyâ€, Visnyk Kremenchutsʹkoho natsionalʹnoho universytetu imeni Mykhayla Ostrohradsʹkoho, Vol. 4 (93), Chast. 1, (2015), ss. 58-64.

      [10] Orysenko OV, Nesterenko MM, “Konstruktsiya udarno-vstryakhivayushchey ustanovki dlya formovaniya stenovykh blokov iz legkikh betonov na osnove analiza konstruktivnykh osobennostey uplotnyayushchikh mashinâ€, Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii 2010g. G. Volgograd, Vol.1, (2011), ss. 227-233.

      [11] Orysenko OV, Nesterenko MM, “Rozroblennya konstruktsiyi udarno-strushuvalʹnoyi ustanovky dlya formuvannya stinovykh blokiv iz lehkykh betoniv na osnovi analizu konstruktyvnykh osoblyvostey ushchilʹnyuyuchykh mashynâ€, Zbirnyk naukovykh pratsʹ: haluzeve mashynobuduvannya, budivnytstvo, Vol. 3(25), (2009), ss. 150-155.

      [12] Orysenko OV, Nesterenko MM, “Udarno-strushuvalʹna ustanovka dlya formuvannya stinovykh arbolitovykh blokiv iz lehkykh betoniv iz zastosuvannyam mineralʹnykh vʺyazhuchykhâ€, Zbirnyk naukovykh pratsʹ: haluzeve mashynobuduvannya, budivnytstvo, Vol. 23, (2009), ss. 63-68.

      [13] I.I. Nazarenko, Prykladni zadachi teoriyi vibratsiynykh system, Vydavnychyy Dim «Slovo», Kyiv, 2010, 440s.

  • Downloads

  • How to Cite

    Nesterenko, M., Nesterenko, T., & Skliarenko, T. (2018). Theoretical Studies of Stresses in a Layer of a Light-Concrete Mixture, Which is Compacted on the Shock-Vibration Machine. International Journal of Engineering & Technology, 7(3.2), 419-424. https://doi.org/10.14419/ijet.v7i3.2.14564

    Received date: 2018-06-23

    Accepted date: 2018-06-23

    Published date: 2018-06-20