Technology of Molding Masses for Architectural and Artistic Ceramics Using Low-Aluminate Clays

  • Authors

    • Nina Chopenko
    • Vladimir Muravlev
    • Olga Skorodumova
    2018-06-20
    https://doi.org/10.14419/ijet.v7i3.2.14595
  • Architectural and artistic ceramics, dehydrated clay, low-aluminate clays, mullite, chamotte, chamotte masses.

  • Abstract

    The article deals with the main technological problems arising in the manufacture of large-scale ceramic products for architectural and artistic purposes. The influence of low-burned chamotte obtained from low-alumina clay on the physical and mechanical properties of molding masses based on the Oposhnya clays is investigated. It is shown that the firing medium of the developed molding masses significantly affects the properties of ceramic products.

     

  • References

    1. [1] Chopenko N.S, Kosyi O.P, Skorodumova O.B, Andriec Ya.O, Chistyakov A.A. (2001), Harakternye osobennosti mineralogicheskogo sostava glin neosvoennyh zon Oposhnyanskogo mestorojdeniya. Visnik Nacional'nogo tehnichnogo universitetu "Harkivs'kii politehnichnii institut", No 19, 72 - 78.

      [2] Chopenko N.S, Semchenko G.D, Nemec I.I. "Strukturno - meha-nicheskie svoistva oposhnyanskih glin" Sb.tr. "Teoriya i praktika processov izmel'cheniya, razdeleniya, smesheniya i uplotneniya", Odessa: OGMA, (2002), S. 152 - 159.

      [3] Semchenko G.D., Kobec N.Yu., Chopenko N.S., Starolat E.E., Medvid' N.G., Argunov R.N. (2006), Vozmojnost' izgotovleniya shamotov iz Oposhnyanskih glin neosvoennoi zony dlya izdelii so-vremennogo dizaina. VÑ–snik NacÑ–onal'nogo tehnÑ–chnogo unÑ–versitetu "HarkÑ–vs'kii polÑ–tehnÑ–chnii Ñ–nstitut", No 30, 174 - 179.

      [4] Balkyavichus V, Valakyavichyus Ch, Shpokauskas A, Laukaitis A, Pyatrikaitis F. (2003), Spekaemost' legkoplavkih illito-derjaschih glin. Steklo i keramika, No 6, 18 - 21.

      [5] Ignatova A.M, Chernyh M.M, Ignatov M.N (2011), Izgotovlenie hudojestvennyh i arhitekturno-dekorativnyh izdelii kamennogo lit'ya, Steklo i keramÑ–ka, No 6, 31-35.

      [6] Kara-sal B.K. (2007), Uluchshenie ekspluatacionnyh harakteristik keramicheskih izdelii putem izmeneniya parametrov sredy objiga, Stroitel'nye materialy, No 2, 60 - 62.

      [7] Kara-sal B.K. (2007), Intensifikaciya spekaniya legkoplavkih glinistyh porod s izmeneniem parametrov sredy objiga. Steklo i keramika, No 3,14-16.

      [8] Abdrahimov A.V. (2006), Vliyanie jelezosoderjaschego tehno-gennogo syr'ya na vyazkost' keramicheskih materialov. Ogneupory i tehnicheskaya keramika, No 2, 48 - 50.

      [9] Dolgii V.P., Abdrahimova E.S., Abdrahimov V.Z. (2005), Vzai-mosvyaz' poristo-kapilyarnoi struktury i morozostoikosti materiala. Ogneupory i tehnicheskaya keramika, No 4, 20-23.

      [10] Yamuna A., Devanarayanan S., Latithambika M. (2002), Phase-pure mullite from kaolinite. J.Amer.Ceram.Soc, 85, No 6, 1409-1413.

      [11] Golovko SA. (2008), Proizvodstvo "velyurovogo kirpicha" rasshirenie assortimenta produkcii i uluchshenie ee potrebitel'skih svoistv. Stroitel'nye materialy, No 4, 17-18.

  • Downloads

  • How to Cite

    Chopenko, N., Muravlev, V., & Skorodumova, O. (2018). Technology of Molding Masses for Architectural and Artistic Ceramics Using Low-Aluminate Clays. International Journal of Engineering & Technology, 7(3.2), 587-590. https://doi.org/10.14419/ijet.v7i3.2.14595

    Received date: 2018-06-23

    Accepted date: 2018-06-23

    Published date: 2018-06-20