Technique for Order Preference by Similarity to Ideal Solution as Decision Support Method for Determining Employee Performance of Sales Section

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    Employees are the backbone of corporate activities and the giving of bonuses, job titles and allowances to employees to motivate the work of employees is very necessary, salesman on the company very much and to find the best salesman cannot be done manually and for that required the implementation of a system in this decision support system by applying the TOPSIS method, it is expected with the implementation of TOPSIS method the expected results of top management can be fulfilled.

     


  • Keywords


    Decision Support System, TOPSIS, Selection Sales

  • References


      [1] S. Robbins, “Organizational Behavior,” in Zhurnal Eksperimental’noi i Teoreticheskoi Fiziki, 2013, p. 676.

      [2] C. Truss, A. Shantz, E. Soane, K. Alfes, and R. Delbridge, “Employee engagement, organisational performance and individual well-being: Exploring the evidence, developing the theory,” International Journal of Human Resource Management, vol. 24, no. 14, pp. 2657–2669, 2013.

      [3] T. Suryanto, R. Rahim, and A. S. Ahmar, “Employee Recruitment Fraud Prevention with the Implementation of Decision Support System,” J. Phys. Conf. Ser., vol. 1028, no. 1, p. 012055, Jun. 2018.

      [4] K. Jiang, D. P. Lepak, K. Han, Y. Hong, A. Kim, and A. L. Winkler, “Clarifying the construct of human resource systems: Relating human resource management to employee performance,” Hum. Resour. Manag. Rev., vol. 22, no. 2, pp. 73–85, 2012.

      [5] R. Nasriyah, Z. Arham, and Q. Aini, “Profile matching and competency based human resources management approaches for employee placement decision support system (case study),” Asian J. Appl. Sci., vol. 9, no. 2, pp. 75–86, 2016.

      [6] A. Yanie et al., “Web Based Application for Decision Support System with ELECTRE Method,” J. Phys. Conf. Ser., vol. 1028, no. 1, p. 012054, Jun. 2018.

      [7] R. Rahim et al., “TOPSIS Method Application for Decision Support System in Internal Control for Selecting Best Employees,” J. Phys. Conf. Ser., vol. 1028, no. 1, p. 012052, Jun. 2018.

      [8] A. Alesyanti, R. Ramlan, H. Hartono, and R. Rahim, “Ethical decision support system based on hermeneutic view focus on social justice,” Int. J. Eng. Technol., vol. 7, no. 2.9, pp. 74–77, 2018.

      [9] Y. Rossanty, D. Hasibuan, J. Napitupulu, M. Dharma, and T. Putra, “Composite performance index as decision support method for multi case problem,” Int. J. Eng. Technol., vol. 7, no. 2.9, pp. 33–36, 2018.

      [10] S. H. Sahir, R. Rosmawati, and R. Rahim, “Fuzzy model tahani as a decision support system for selection computer tablet,” Int. J. Eng. Technol., vol. 7, no. 2.9, pp. 61–65, 2018.

      [11] T. Simanihuruk et al., “Hesitant Fuzzy Linguistic Term Sets with Fuzzy Grid Partition in Determining the Best Lecturer,” Int. J. Eng. Technol., vol. 7, no. 2.3, pp. 59–62, 2018.

      [12] M. D. T. P. Nasution et al., “Decision Support Rating System with Analytical Hierarchy Process Method,” Int. J. Eng. Technol., vol. 7, no. 2.3, pp. 105–108, 2018.

      [13] A. Indahingwati, M. Barid, N. Wajdi, D. E. Susilo, N. Kurniasih, and R. Rahim, “Comparison Analysis of TOPSIS and Fuzzy Logic Methods On Fertilizer Selection,” Int. J. Eng. Technol., vol. 7, no. 2.3, pp. 109–114, 2018.

      [14] P. harliana and R. Rahim, “Comparative Analysis of Membership Function on Mamdani Fuzzy Inference System for Decision Making,” J. Phys. Conf. Ser., vol. 930, no. 1, p. 012029, Dec. 2017.

      [15] R. Risawandi and R. Rahim, “Study of the Simple Multi-Attribute Rating Technique For Decision Support,” Int. J. Sci. Res. Sci. Technol., vol. 2, no. 6, pp. 491–494, 2016.

      [16] G. Kabir and M. A. A. Hasin, “Comparative analysis of TOPSIS and Fuzzy TOPSIS for the evaluation of travel website service quality,” Int. J. Qual. Res., vol. 6, no. 3, pp. 169–185, 2012.

      [17] B. (Kiran) Bulgurcu, “Application of TOPSIS Technique for Financial Performance Evaluation of Technology Firms in Istanbul Stock Exchange Market,” Procedia - Soc. Behav. Sci., vol. 62, pp. 1033–1040, 2012.

      [18] A. M. Yaakob and A. Gegov, “Interactive TOPSIS Based Group Decision Making Methodology Using Z-Numbers,” Int. J. Comput. Intell. Syst., vol. 9, no. 2, pp. 311–324, 2016.

      [19] A. Łatuszyńska, “Multiple-Criteria Decision Analysis Using Topsis Method For Interval Data In Research Into The Level Of Information Society Development,” Folia Oeconomica Stetin., vol. 13, no. 2, pp. 63–76, Jan. 2014.

      [20] C. H. Primasari, R. Wardoyo, and A. K. Sari, “Integrated AHP, Profile Matching, and TOPSIS for selecting type of goats based on environmental and financial criteria,” Int. J. Adv. Intell. Informatics, vol. 4, no. 1, pp. 28–39, Mar. 2018.

      [21] A. A. Esfahani et al., “An evaluation model for the implementation of hospital information system in public hospitals using multi-criteria-decision-making (MCDM) approaches,” Int. J. Eng. Technol., vol. 7, no. 1, p. 1, Dec. 2017.

      [22] M. Min, “A rule based expert system for analysis of mobile sales data on fashion market,” in 2013 International Conference on Information Science and Applications, ICISA 2013, 2013.

      [23] D. Napitupulu, M. Syafrullah, R. Rahim, A. Amar, and Y. Sucahyo, “Content validity of critical success factors for e-Government implementation in Indonesia,” IOP Conf. Ser. Mater. Sci. Eng., vol. 352, p. 012058, May 2018.

      [24] K. Adiyarta, D. Napitupulu, H. Nurdianto, R. Rahim, and A. Ahmar, “User acceptance of E-Government Services Based on TRAM model,” IOP Conf. Ser. Mater. Sci. Eng., vol. 352, p. 012057, May 2018.

      [25] J. Papathanasiou, N. P. B, T. Bournaris, and B. Manos, “A Decision Support System for Multiple Criteria Alternative Ranking Using TOPSIS and VIKOR : A Case Study on Social Sustainability in Agriculture,” ICDSST, vol. 2, pp. 3–15, 2016.

      [26] R. Rahim, A. S. Ahmar, A. P. Ardyanti, and D. Nofriansyah, “Visual Approach of Searching Process using Boyer-Moore Algorithm,” J. Phys. Conf. Ser., vol. 930, no. 1, p. 012001, Dec. 2017.

      [27] R. Rahim, I. Zulkarnain, and H. Jaya, “A review: search visualization with Knuth Morris Pratt algorithm,” in IOP Conference Series: Materials Science and Engineering, 2017, vol. 237, no. 1, p. 012026.

      [28] P. He, L. Chen, and X. H. Xu, “Fast C4.5,” in Proceedings of the Sixth International Conference on Machine Learning and Cybernetics, ICMLC 2007, 2007, vol. 5, pp. 2841–2846.

      [29] R. Rahim, S. Nurarif, M. Ramadhan, S. Aisyah, and W. Purba, “Comparison Searching Process of Linear, Binary and Interpolation Algorithm,” J. Phys. Conf. Ser., vol. 930, no. 1, p. 012007, Dec. 2017.

      [30] R. Rahim, I. Zulkarnain, and H. Jaya, “Double hashing technique in closed hashing search process,” IOP Conf. Ser. Mater. Sci. Eng., vol. 237, no. 1, p. 012027, Sep. 2017.

      [31] D. U. Sutiksno, A. S. Ahmar, N. Kurniasih, E. Susanto, and A. Leiwakabessy, “Forecasting Historical Data of Bitcoin using ARIMA and α-Sutte Indicator,” J. Phys. Conf. Ser., vol. 1028, no. 1, p. 012194, 2018.

      [32] A. S. Ahmar, A. Rahman, A. N. M. Arifin, and A. A. Ahmar, “Predicting movement of stock of ‘Y’ using sutte indicator,” Cogent Econ. Financ., vol. 5, no. 1, 2017.

      [33] N. Kurniasih, A. S. Ahmar, D. R. Hidayat, H. Agustin, and E. Rizal, “Forecasting Infant Mortality Rate for China: A Comparison Between α-Sutte Indicator, ARIMA, and Holt-Winters,” J. Phys. Conf. Ser., vol. 1028, no. 1, p. 012195, 2018.

      [34] Ep. E.P. and S. R, “Big data management with machine learning inscribed by domain knowledge for health care,” Int. J. Eng. Technol., vol. 6, no. 4, p. 98, Sep. 2017.

      [35] J. Shang, P. R. Tadikamalla, L. J. Kirsch, and L. Brown, “A decision support system for managing inventory at GlaxoSmithKline,” Decis. Support Syst., vol. 46, no. 1, pp. 1–13, 2008.

      [36] P. Karande, E. K. Zavadskas, and S. Chakraborty, “A study on the ranking performance of some MCDM methods for industrial robot selection problems,” Int. J. Ind. Eng. Comput., vol. 7, no. 3, pp. 399–422, 2016.

      [37] S. H. Zanakis, A. Solomon, N. Wishart, and S. Dublish, “Multi-attribute decision making: A simulation comparison of select methods,” Eur. J. Oper. Res., vol. 107, no. 3, pp. 507–529, 1998.

      [38] A. Zadeh Sarraf, A. Mohaghar, and H. Bazargani, “Developing TOPSIS method using statistical normalization for selecting knowledge management strategies,” J. Ind. Eng. Manag., vol. 6, no. 4, pp. 860–875, 2013.


 

View

Download

Article ID: 14693
 
DOI: 10.14419/ijet.v7i2.12.14693




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.