Determination of Combination of Optimal Factor Level in Improvement and Uniform Effort of Product Quality Using Taguchi Method

  • Authors

    • Abdurrozzaq Hasibuan
    • Mhd. Asaad
    • Oris Krianto Sulaiman
    • Abdul Haris Nasution
    • Muslih Nasution
    • Liesna Andriany
    https://doi.org/10.14419/ijet.v7i2.12.14696
  • Quality Engineering, Taguchi Method, ANOVA

  • Abstract

    The quality engineering including all of quality control activity in every phase from research and product development, production process planning and the consumer’s satisfaction. In the taguchi method used a matrix called orthogonal array located in the level combination election from the variable’s input for every experiment’s. The experiment result of taguchi method find level combination from the most infivential factor’s in decorated ceramic quality are: the mixture composition of raw material;s (level 2), the comparison consist from kaolin = 10 ; felspar = 10 : tanah pucung = 3 ; water glass = 0.25 ; boor clay = 1.25; the composition of dye (level) the comparison cousist from : cobalt = 1 and tanah pucung = 5; the mold sfape (level 2) the kind it’s fave a long neck. Besides from the experiment result find the prediction of defect persentase based on total average defect is 6.78 for every burning but based on signal to noise is less or niore 6.619% for every burning.

     

     

  • References

    1. [1] R. Rahim, S. Napid, A. Hasibuan, S. R. Sibuea, and Y. Yusmartato, “Effect of the Machined Surfaces of AISI 4337 Steel to Cutting Conditions on Dry Machining Lathe,†J. Phys. Conf. Ser., vol. 1007, p. 012064, Apr. 2018.

      [2] C. Rahmawati, Z. Zainuddin, S. Is, and R. Rahim, “Comparison Between PCI and Box Girder in BridgesPrestressed Concrete Design,†J. Phys. Conf. Ser., vol. 1007, no. 1, p. 012065, Apr. 2018.

      [3] A. B.H., P. F. Ostwald, and S. Djaprie, Teknologi Mekanik, 7th ed. Jakarta: Erlangga, 1997.

      [4] A. Hasibuan et al., “Performance analysis of Supply Chain Management with Supply Chain Operation reference model,†vol. 1007, pp. 1–8, 2018.

      [5] P. . Apte, “5 Day Course on Taguchi Method for Quality cost Optimization.†.

      [6] N. Belavendram, Quality by Desaign : Taguchi Techniques for Industrial Exsperimentation. New York: Prentice Hall, 1991.

      [7] G. S. Peace, Taguchi Methods A Hands on Approach. Canada: Addison Wesley Publishing Company, 1993.

      [8] R. H and R. E., Ilmu Peluang dan Statistik Untuk Insinyur dan Ilmuwan, 2nd ed. Bandung: ITB, 1986.

      [9] N. Cross, Engineering Design Methods : Strategies for Product Design, 2nd editio. England: John Wiley & Sons, 1994.

      [10] A. Hasibuan, Metodologi Penelitian. 2013.

      [11] et al De Vor, Statistical Quality Design and Control: Contemporary Concepts and Methods. New York: Macmilan Publishing Company, 1992.

      [12] DEPPERINDAG, Diktat Perbaikan Proses Pada Industri Kerajinan Keramik, Balai Besar Industri Keramik Bandung. Bandung: DEPPERINDAG, 1999.

      [13] DEPPERINDAG, Diktat Desain Produk Keramik Hias, Balai Besar Industri Keramik Bandung. Bandung: DEPPERINDAG, 1999.

      [14] W. Y. Fowlkes and C. M. Creveling, Engineering Methods for Robust Design : Using Taguchi Methods in Technology and Product Development. New York: Addison – Wesley Publishing Company, 1995.

      [15] G. Taguchi, “What Are Taguchi Methods?,†2017. .

      [16] K. J, Optimazing Engineering Design. Singapore: McGraw-Hill International Editions, 1994.

      [17] P. J. Ross, Taguchi Techniques for Quality Engineering, 2nd ed. New York: McGraw-Hill, 1996.

      [18] O. K. Sulaiman et al., “Bellman Ford algorithm-in RoutingInformation Protocol ( RIP ),†vol. 1007, pp. 1–9, 2018.

      [19] G. Taguchi, Introduction to Quality Engineering. Tokyo: APO, 1986.

      [20] Sujana, Desain dan Analisis Eksperimen, 4th ed. Bandung: Tarsito, 1995.

  • Downloads

  • How to Cite

    Hasibuan, A., Asaad, M., Krianto Sulaiman, O., Haris Nasution, A., Nasution, M., & Andriany, L. (2018). Determination of Combination of Optimal Factor Level in Improvement and Uniform Effort of Product Quality Using Taguchi Method. International Journal of Engineering & Technology, 7(2.14), 301-304. https://doi.org/10.14419/ijet.v7i2.12.14696

    Received date: 2018-06-26

    Accepted date: 2018-06-26