Rectenna circuit at 6.13 GHz to operate the sensor devices

  • Authors

    • Anurag Saxena
    • V K. Singh
    • Mohini .
    • Sonam Bhardwaj
    • Gyoo Soo Chae
    • Ashis Sharma
    • Akash Kumar Bhoi
    2018-06-08
    https://doi.org/10.14419/ijet.v7i2.33.14856
  • CST Software, Rectenna, Pspice Software and Jeans

  • Abstract

    There are various types of transmission through wire and wireless but wireless power transmission is the transmission of electrical energy without using any conductor or lead. At resonant frequency, 6.13 GHz wearable antenna is fabricated and tested. For making wearable an-tenna, textile material (substrate) i.e. Jeans is used for the simulation having dielectric constant 1.7. At the places where it is hard to transmit energy, wearable antenna is best suitable for this purpose, but before doing this RF is converted into DC with the help of the rectifier. Vari-ous types of graph in this paper are shown in the comparison between the power and efficiency. For simulating and design purpose of an-tenna CST, software is used. Implementation of antenna with rectifier circuit is known as rectenna and the rectenna circuit can be designed in Pspice software.

     

     

  • References

    1. [1] Agbinya, Johnson I., “Wireless power transfer. River publishersâ€, pp. 1–2, (2012), ISBN 8792329233.

      [2] Naresh B., Vinod Kumar Singh, “4.65 GHz Wearable Rectenna for low power Wireless applicationsâ€, International Conference on Electrical, Computer and Communication Technologies (ICECCT-2017), Department of Electrical and Electronics Engineering, SVS College of Engineering, Coimbatore, Tamil Nadu, 2017.

      [3] Sazonov, Edward; Neuman, Michael R., “Wearable Sensors: Fundamentals, Implementation and Applicationsâ€, Elsevier. pp. 253–255, (2014), ISBN 0124186661.

      [4] Ashley, Steven (November 20, 2012). "Wireless recharging: Pulling the plug on electric cars". BBC website. British Broadcasting Corp. Retrieved December 10, 2014.

      [5] Agboola Awolola Teru, “Efficient rectenna circuits for microwave Wireless power transmissionâ€, December 2010.

      [6] Sun, Tianjia; Xie, Xiang; Zhihua, Wang, “Wireless Power Transfer for Medical Microsystemsâ€, Springer Science & Business Media. pp. 5–6, (2013), ISBN 1461477026.

      [7] Bush, Stephen F., “Smart Grid: Communication-Enabled Intelligence for the Electric Power Gridâ€. John Wiley & Sons. p. 118, (2014), ISBN 1118820231.

      [8] Naresh B., Vinod Kumar Singh, “Dual band RF Energy Harvester for Wearable Electronic Technologyâ€, 3rd International Conference on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics (AEEICB-17), 27th& 28th February, 2017.

      [9] Naresh B., Singh V.K., Bhargavi V., “Low Power Circularly Polarized Wearable Rectenna for RF Energy Harvestingâ€, Garg A., Bhoi A., Advances in Power Systems and Energy Management. Lecture Notes in Electrical Engineering, vol 436, (2018), Springer, Singapore

      [10] Naresh B., Singh V.K., Bhargavi V., Garg A., Bhoi A.K., “Dual-Band Wearable Rectenna for Low-Power RF Energy Harvestingâ€, Garg A., Bhoi A., Advances in Power Systems and Energy Management. Lecture Notes in Electrical Engineering, Vol 436, (2018), Springer, Singapore.

      [11] Rajakaruna, Sumedha; Shahnia, Farhad Ghosh, Arindam Plug “Electric Vehicles in Smart Grids Integration Techniquesâ€, pp. 34–36, (2014), Springer.

  • Downloads

  • How to Cite

    Saxena, A., K. Singh, V., ., M., Bhardwaj, S., Soo Chae, G., Sharma, A., & Kumar Bhoi, A. (2018). Rectenna circuit at 6.13 GHz to operate the sensor devices. International Journal of Engineering & Technology, 7(2.33), 644-646. https://doi.org/10.14419/ijet.v7i2.33.14856

    Received date: 2018-06-30

    Accepted date: 2018-06-30

    Published date: 2018-06-08