Improved Energy Efficient Wireless Sensor Networks Using Balanced Multi-Hop Routing Protocol

  • Authors

    • C Sivakumar
    • P Latha Parthiban
    2018-07-04
    https://doi.org/10.14419/ijet.v7i3.6.14927
  • Dijkstra protocol, wireless sensor network, energy-efficient routing, least-hop routing.

  • Abstract

    In this paper, consumption of energy by the sensor nodes in Wireless Sensor Nodes (WSNs) is been handled effectively using a combined technique. The objective of the paper is to increase the network lifetime with dynamic routing protocol. Here, the proposed routing algorithm, named Balanced Multi-Hop (BMH) protocol combines the multi-hop and direct transmission communication. This method further uses Dijkstra algorithm to route the packets between the sensor nodes and base station in mobile network. This method avoids the use of central router to control the other nodes. The results of the proposed method is tested against various result metrics. The evaluation over other existing methods prove that the BMH method achieves higher lifetime and high network throughput.

     

     

  • References

    1. [1] Abbasi JS, Javaid N, Gull S, Islam S, Imran M, Hassan N & Nasr K, “Balanced Energy Efficient Rectangular routing protocol for Underwater Wireless Sensor Networksâ€, 13th International Wireless Communications and Mobile Computing Conference (IWCMC), (2017), pp.1634-1640.

      [2] Wang J, Cho J & Lee S, “Experimental study of energy consumption in direct transmission and multi-hop transmission for wireless sensor networksâ€, IEEE International Conference on Networking, Sensing and Control, (2008), pp.1179-1184.

      [3] Wang J, Niu Y, Cho J & Lee S, “Analysis of energy consumption in direct transmission and multi-hop transmission for wireless sensor networksâ€, Third International IEEE Conference on(Signal-Image Technologies and Internet-Based System, (2007), pp.275-280.

      [4] Yan X, Song A, Yang Z & Yang W, “An improved multihop-based localization algorithm for wireless sensor network using learning approachâ€, Computers & Electrical Engineering, Vol.48, (2015), pp.247-257.

      [5] Nagayama T, Ushita M & Fujino Y, “Suspension bridge vibration measurement using multihop wireless sensor networksâ€, Procedia Engineering, (2011), pp.761-768.

      [6] Benzerbadj A, Kechar B, Bounceur A & Pottier B, “Cross-Layer Greedy Position-Based Routing for Multihop Wireless Sensor Networks in a Real Environmentâ€, Ad Hoc Networks, (2018).

      [7] Wang J, Miao Y, Zhou P, Hossain MS & Rahman SMM, “A software defined network routing in wireless multihop networkâ€, Journal of Network and Computer Applications, (2017), pp.76-83.

      [8] Lertpratchya D & Blough DM, “Interference-aware multicast trees and meshes for wireless multihop networksâ€, Ad Hoc Networks, (2016), pp.99-113.

      [9] Shah S & Beferull-Lozano B, “Joint sensor selection and multihop routing for distributed estimation in ad-hoc wireless sensor networksâ€, IEEE Transactions on Signal Processing, Vol.61, No.24,(2013), pp.6355-6370.

      [10] Wang H, Zhang X, Naït-Abdesselam F & Khokhar A, “Cross-layer optimized MAC to support multihop QoS routing for wireless sensor networksâ€, IEEE Transactions on Vehicular Technology, Vol.59, No.5,(2010), pp.2556-2563.

      [11] Rahat AA, Everson RM & Fieldsend JE, “Hybrid evolutionary approaches to maximum lifetime routing and energy efficiency in sensor mesh networksâ€, Evolutionary computation, Vol.23, No.3,(2015), pp.481-507.

      [12] Hari U, Ramachandran B & Johnson C,â€An unequally clustered multihop routing protocol for wireless sensor networksâ€, International Conference on Advances in Computing, Communications and Informatics, (2013), pp.1007-1011.

      [13] Pant M, Dey B & Nandi S, “A multihop routing protocol for wireless sensor network based on grid clusteringâ€, Applications and Innovations in Mobile Computing, (2015), pp. 137-140.

      [14] Gangal V, HacioÄŸlu G & Sesl̇I E, “Energy efficient multihop routing in wireless sensor networks based on ant colony algorithmâ€, 23th Signal Processing and Communications Applications Conference (SIU), (2015), pp.1877-1880.

      [15] Omari M & Fateh WH, “Enhancing multihop routing protocols in wireless sensor networks using LEACH-1Râ€, 2nd World Symposium on Web Applications and Networking, (2015), pp.1-6.

      [16] Karthikeyan A, Jagadeep V & Rakesh A, “Energy efficient multihop selection with PEGASIS routing protocol for wireless sensor networksâ€, IEEE International Conference on Computational Intelligence and Computing Research (ICCIC), (2014), pp.1-5.

      [17] Kaur H, Jain P & Prabhakar G, “An advanced form of stable election multihop routing protocols using gateways in Wireless Sensor Networksâ€, International Conference on Computation of Power, Energy Information and Communication, (2016), pp.129-138.

      [18] Misailović SD & Marković GB, “Multihop hierarchical routing protocol for large wireless sensor networks under the non-ideal connectivity conditionsâ€, 24th Telecommunications Forum (TELFOR), (2016), pp.1-4.

  • Downloads

  • How to Cite

    Sivakumar, C., & Latha Parthiban, P. (2018). Improved Energy Efficient Wireless Sensor Networks Using Balanced Multi-Hop Routing Protocol. International Journal of Engineering & Technology, 7(3.6), 24-29. https://doi.org/10.14419/ijet.v7i3.6.14927

    Received date: 2018-07-02

    Accepted date: 2018-07-02

    Published date: 2018-07-04