Identification of Complex Production Systems with Using Iterative Networks

  • Authors

    • Korneev A.M
    • Abdullakh L.S
    • Sukhanov A.B
    • Antar .
    • S D
    • Al-jonid Kh.M
    2018-07-07
    https://doi.org/10.14419/ijet.v7i3.5.15197
  • Identification, complex production, iterative networks, the technological factors.
  • In the article the technique of identification of complex production systems using iterative networks is considered. The identification process begins with the allocation of functional blocks, which can later be described by automata working with discrete information and changing internal states only at specified times. The basic laws of the functioning of the selected subsystems are simulated. Characteristics of cells formed parameters associated with multi-step manufacturing process. As the semi-finished product passes through the processing stages under consideration, the values of the technological factors being realized are fixed in the system being formed.

     

     

  • References

    1. [1] Abdullah L.S, Korneev A.M, Smetannikova T.A, (2013), Structural cell-hierarchical identification of complex spatially distributed production systems, Proceedings of the 3rd International Academic Conference. St. Louis, Missouri, USA. С.75-79.

      [2] Korneev, A. M, (2009), Methods for the identification of cross-cutting technology production of steel products: monograph / Lipetsk state pedagogical University. - Lipetsk: LGU, p. 286.

      [3] Korneev, A. M, (2011), cellular Structural-hierarchical modeling of complex prostranstvenno-distributed systems. - News of higher educational institutions of the Central Chernozem region, No. 1, pp. 62-66.

      [4] Kuznetsov, L. A., A. Korneev, M, (1994), Automated system of selecting the optimal technology for the production of steel. - Izvestiya vuzov. Ferrous metallurgy, No. 5, pp. 45-48.

      [5] Stratonovich, R. L(1975), Theory of information. - Moscow: Sov. radio, p. 424. Korneev, A. M, (2004), the Use of information criteria connection input and output variables for the selection of optimal technologies - Izvestiya vuzov. Ferrous metallurgy, No. 9, pp. 48 -52.

      [6] Korneev, A. M, (2008), Criteria communication technologies and properties, taking into account costs and the cost of the finished product. - Control systems and information technology, Vol. 31, No. 1.1, pp. 160-162.
      Russian letters.

      [7] M. Shmyrin, I. A. Sedykh, (2010), Identification and Control Algorithms of Functioning for Neighborhood Systems Based on Petri Nets, Automation and Remote Control, Vol. 71, Issue 6, pp. 1265-1274.

      [8] S.L. Blyumin, A.M. Shmyrin, O.A. Shmyrina, (2006), Bilinear Neighborhood Systems. Monograph. Lipetsk, Lipetsk State Technical University Publishers, p. 131, (in Russian).

      [9] A.L. Genkin, I.V. Nikulin, (2011), The Use of Simulation in the Control Sheet-Rolling Complex, Informacionnye Tehnologii i Vychislitel'nye Sistemy, No. 2, pp. 75-79, (in Russian).

      [10] A.M. Korneev, L.S.Abdullakh, T.A. Smetannikova, (2015), CRITERION FOR ASSESSING THE EFFECTIVENESS OF FUNCTIONING OF COMPLEX SYSTEMS BASED ON THE USE THE AMOUNT OF INFORMATION, International Journal of Applied Engineering Research, Т. 10, No. 11, pp. 27961-27980.

      [11] J.K. Alekseev, A.P. Sukhorukov, (2013), Introduction to the Theory of Catastrophes, Librokom, pp. 176.

      [12] Korneev, A.M; Nagi, AM; Vasyukov, AM; Smetannikova, TT ; Antar, SD. Describing Discrete Cell-Hierarchical Systems Using Iterative Networks. International Journal of Advanced Biotechnology and Research. Vol. 8 I

  • Downloads

  • How to Cite

    A.M, K., L.S, A., A.B, S., ., A., D, S., & Kh.M, A.- jonid. (2018). Identification of Complex Production Systems with Using Iterative Networks. International Journal of Engineering & Technology, 7(3.5), 37-39. https://doi.org/10.14419/ijet.v7i3.5.15197