Performance Analysis and Testing of Aftermarket Filters

  • Authors

    • Srinivaas A
    • Vishnu R
    2018-07-07
    https://doi.org/10.14419/ijet.v7i3.8.15216
  • Aftermarket filter, filter efficiency, media strength, porosity, pressure drop, OEM.
  • Aftermarket segment is one of the promising and growing section in automobile industry. The popularity of this section is due to the low cost and high replacement rate. Best filters among many will survive in the market. Different Filter manufacturers develop filters for same purpose but varies in their construction. There are a wide variety of aftermarket performance filters for the same type of OEMs. They vary in their brand name, filter area, filter medium, price, service life and method of install. The presence of increased number of aftermarket performance filters has prompted automotive enthusiasts to replace the OEM filter for the same purpose available in lower cost. The paper discusses about the testing procedures to be done to compare the performances both the brands (OEM and Aftermarket filters). All the experiments were conducted at PSG institute of science & Technology Coimbatore. This study shows how much an aftermarket filter varies from that of OEM. The performance of both OEMs (BOSCH and FLEETGUARD) and Aftermarket filter(UCAP) are evaluated by pressure drop, filter efficiency, media strength, porosity tests.

     

     

  • References

    1. [1] Mathews V John, Sandhya M, Balakrishnan K, “Effect of OEM Style And Aftermarket Performance Air Filters on Vehicle Parameters,†Procedia Technology, vol.24, pp. 461 – 468,2016.

      [2] Patel R., Shah D., Prajapti B. G. and Patel M., “Overview of industrial filtration technology and its applications,†Indian Journal of Science & Technology, vol.3, pp.10, October 2010.

      [3] Jian Yong Feng, Jianchun, “Zhang The Property of Automobile Engine Oil Filtration Material and the Development of New Filter,†Journal of Engineered Fibers and Fabrics, vol.9, issue 3, 2014.

      [4] Rashed, Md, Mahamudul Islam, “Effect of Tuck Loop In Bursting Strength OF Single Jersey Knitted Fabricsâ€, International Journal of Research in Engineering and Technology, vol.3, pp. 2321-7308, May 2014.

      [5] Yan Fang, H. Dennis Tolley, Milton L. Lee, “Simple capillary flow porometer for characterization of capillary columns containing packed and monolithic beds,†Journal of Chromatography A, pp..6405-6412, 2010.

      [6] IS0 4548-12:2000, Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity.

      [7] IS0 4548-4:1997, Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method).

      [8] IS0 4548-6:1985, Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test.

      [9] IS0 4548-l:1982, Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 1: Differential pressure/flow characteristics.

      [10] ISO 16889:2008, Hydraulic fluid power-Filters-Multi-pass method for evaluating filtration performance of a filter element.

      [11] Sathyananrayanan K. and Narayanankutty Karuppath, “'UV Emission from TAURUS Molecular Cloudâ€, 23rd Swadeshi Science Congress. MG University, Kottayam, 2013.

      [12] V. Sundaram G. and Dr. Thirumalini S., “Experimental Study of Emission and Performance of Single Cylinder Diesel Engine Running on Groundnut Oil Based Biodieselâ€, International Journal of Scientific & Engineering Research, vol.5, no. 7, 2014.

      [13] D.Vignesh and Srihari S., “Investigation on performance and emission behaviour of a single cylinder diesel engine fuelled with mixture of cottonseed and sunflower biodiesel blends along with dieselâ€, International Journal of Applied Engineering Research, vol. 10, pp. 40265-40269, 2015.

      [14] G. Kumar and Dr. Thirumalini S., “Effect of lubricating oil temperatures on fuel consumption and emissions under cold start conditions for a diesel engineâ€, SAE International, 2016.

  • Downloads

  • How to Cite

    A, S., & R, V. (2018). Performance Analysis and Testing of Aftermarket Filters. International Journal of Engineering & Technology, 7(3.8), 42-47. https://doi.org/10.14419/ijet.v7i3.8.15216