Analysis of Plastic Flow Localization in Bimetal Electrolytically Saturated with Hydrogen

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    Plastic deformation of bimetal compound of austenitic stainless and low-carbon construction steels, resistant to corrosion, is localized through the digital image correlation method upon the uniaxial tension of sample. The evolution of zones of plastic deformation in bimetal is inspected upon the onset of the process and is exposed to hydrogen saturation in a three-electrode electrochemical cell at a controlled constant cathode potential for 6 hours. Localized plastic deformation zones are found to form and evolve during the tension of bimetal samples both at the onset and after 6 hour of the electrolytic hydrogenation throughout the plastic yielding in the primary, protective and transitional layers of the bimetal. The bimetal fracture is initiated by stress concentrated in the bimetal transition layer. Nucleation and propagation of a crack is observed at early work-hardening stages. The fracture of bimetal after hydrogenation is established to be more ductile as compared with precursor.

     

     

  • Keywords


    Plastic deformation; Hydrogen; Localization; Bimetal; Fracture.

  • References


      [1] M. Acarer, B. Gulenc, F. Findik (2003), Investigationm of explosive welding. parameters and their effects on microhardness. Materials & Design 24, 659-664.

      [2] N. Venkateswara, G. Madhusudhan, S. Nagarjuna (2011), Weld overlay cladding of high strength low alloy steel with austenitic stainless steel–structure and properties. Materials & Design 32, 2496-2506.

      [3] F. Findik, R. Yilmaz, T. Somyurek (2011), The effect of heat treatment on the microstructure and microhardness of explosive welding. Scientific Research and Essays. 6, 4141-4151.

      [4] L. Guobin, W. Jianjun, L. Xiangzhi, L. Guiyun (1998), The properties and application of bimetal hot-forging die. Journal of Materials Processing Technology. 75, 152-156.

      [5] L. Mehnen, H. Pfutzner, E. Kaniusas (2000), Magnetostrictive amorphous. bimetal sensors. Journal of Magnetism and Magnetic Materials. 215, 779-781.

      [6] J. Nakano, Y. Miwa, T. Tsukada, M. Kikuchi, S. Kita, Y. Nemoto, H. Tsuji, S. Jitsukawa (2002), Characterization of 316L(N)-IG SS joint produced by hot isostatic pressing technique. Journal of Nuclear Materials. 307, 1568-1572.

      [7] H.R. Akramifarid, H. Mirzadeh, M.H. Parsa (2014), Cladding of aluminum on AISI 304L stainless steels by cold roll bonding: mechanism, microstructure, and mechanical properties. Materials Science and Engineering. 613, 232-239.

      [8] S.A. Barannikova (2000), Localization of stretching strain in doped carbon gamma-Fe single crystals. Technical Physics. 45, 1368-1370.

      [9] L.B. Zuev, V.I. Danilov, S.A. Barannikova, I.Y. Zykov (2000), A new type of plastic deformation waves in solids. Journal of Applied Physics. A 71, 91-94.

      [10] L.B. Zuev, S.A. Barannikova (2011), Plastic flow localization viewed as auto-wave process generated in deforming metals. Solid State Phenomena. 172-174, 1279-1283.

      [11] V.P. Ramunni, T. De Paiva Coelho, P.E.V. de Miranda (2006), Interaction of hydrogen with the microstructure of low-carbon steel. Materials Science and Engineering. 435–436, 504–514.

      [12] H. Fuchigami,. H. Minami, M. Nagumo (2006), Effect of grain size on the susceptibility of martensitic steel to hydrogen-related failure. Philosophical Magazine Letters. 86, 21–29.

      [13] Y. Kim,. Yu. Kim, D. Kim, S. Kim, W. Nam, H. Choe (2011), Effects of hydrogen diffusion on the mechanical properties of austenite 316L steel at ambient temperature. Materials Transactions. 52, 507 – 513.

      [14] G.T. Park, S.U. Koh, H.G. Jung, K.Y. Kim (2008), Effect of microstructure on the hydrogen rapping efficiency and hydrogen induced cracking of pipeline steel. Corrosion Science. 1865-1871

      [15] L. Chen, Z. Yang, B. Jha, G. Xia, J.W. Stevenson (2005), Clad metals, roll bonding and their applications for SOFC interconnects. Journal of Power Sources. 152, 40-45.

      [16] S.A. Barannikova, A.G. Lunev, M.V. Nadezhkin, L.B. Zuev (2014), Effect of hydrogen on plastic strain localization of construction steels. Advanced Materials Research. 880, 42-47.

      [17] S. Sozen (2015), Determination of displacement distributions in welded steel tension elements using digital image techniques. Steel and Composite Structures. 18, 1103-1117.

      [18] D. Sokoli, W. Shekarchi, E. Buenrostro, M. Wassim (2014), High-strength reinforcement in columns under high shear stress, Earthquake engineering. 7, 609-626.

      [19] L.B. Zuev, V.V. Gorbatenko, S.N. Polyakov (2002), Instrumentation for speckle interferometry and techniques for investigation deformation and fracture. Proceedings of SPIE. 4900, 1197.

      [20] A. Acharya, A. Beaudoin, R. Miller (2008), New perspectives in plasticity theory. Dislocation Nu- cleation, waves, and partial continuity of plastic strain rate. Mathematics and Mechanics of Solids. 13, 292 -315.

      [21] A. Roth, T.A. Lebedkina, M.A. Lebyodkin (2012), On the critical strain for the onset of plastic instability in an austenitic FeMnC steel. Materials Science and Engineering. 539, 280-284.


 

View

Download

Article ID: 15337
 
DOI: 10.14419/ijet.v7i2.23.15337




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.