Analytical Study of Physical & Mechanical Properties of Foamed Concrete Using ETABS

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    Foam concrete is a form of aerated lightweight concrete. Foamed concrete has emerged as most industrial fabric in Production Company. Foam concrete is produced while pre-fashioned foam is brought to slurry, the characteristic of froth is to create an air voids in cement–primarily based absolutely slurry. Foam is generated one by one via using foam generator; the foaming agent is diluted with water and aerated to create the froth. The cement paste or slurry set throughout the foam bubbles and whilst the froth being to degenerate, the paste has enough power to keep its form around the air voids. Consequently, this study investigates bodily and mechanical residences of foamed concrete. Ultimately comparative analyses had been finished to decide the relationships the various numerous mechanical homes parameters of the foamed concrete, especially the compressive strength, flexural electricity, splitting tensile electricity. The specimen analysed by means of the usage of the use of e- tab software program.

     

     


  • Keywords


    Analytical Study, Physical, Mechanical Properties, Foamed Concrete, ETABSS

  • References


      [1]. T.Subramani, J.Jayalakshmi , " Analytical Investigation Of Bonded Glass Fibre Reinforced Polymer Sheets With Reinforced Concrete Beam Using Ansys" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 4, Issue 5, pp. 105-112 , 2015

      [2]. T.Subramani. , S.Vishnupriya, “Finite Element Analysis of a Natural Fiber (Maize) Composite Beam”, International Journal of Modern Engineering Research, Volume. 4, Issue. 6 (Version 1), pp 1 – 7, 2014,

      [3]. T.Subramani., R.Senthil Kumar, “Modelling and Analysis of Hybrid Composite Joint Using Fem in ANSYS”, International Journal of Modern Engineering Research, Volume 4, Issue 6 (Version 1), pp 41- 46, 2014.

      [4]. T.Subramani, S.Sharmila, “Prediction of Deflection and Stresses of Laminated Composite Plate with Artificial Neural Network Aid”, International Journal of Modern Engineering Research, Volume 4, Issue 6 (Version 1), pp 51 -58, 2014.

      [5]. T.Subramani., S.Sundar, M.Senthilkumar, “Investigation of the Behaviour for Reinforced Concrete Beam Using Non Linear Three Dimensional Finite Elements”, International Journal of Modern Engineering Research, Volume. 4, Issue. 6 (Version 2), pp 13 -18, 2014,

      [6]. T.Subramani, A.Arul, "Design And Analysis Of Hybrid Composite Lap Joint Using Fem" International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 5), pp 289- 295, 2014.

      [7]. T.Subramani., J.Jothi,, M.Kavitha "Earthquake Analysis Of Structure By Base Isolation Technique In SAP", International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 5), pp 296 - 305, 2014.

      [8]. T.Subramani., R.Manivannan.R, M.Kavitha, "Crack Identification In Reinforced Concrete Beams Using Ansys Software" ,International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 133 - 141, 2014.

      [9]. T.Subramani., Reni Kuruvilla, J.Jayalakshmi., “Nonlinear Analysis Of Reinforced Concrete Column With Fiber Reinforced Polymer Bars" International Journal of Engineering Research and Applications Volume. 4, Issue. 6 (Version 5), pp 306- 316, 2014.

      [10]. T.Subramani, D.Sakthi Kumar, S.Badrinarayanan. "Fem Modelling And Analysis Of Reinforced Concrete Section With Light Weight Blocks Infill " International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 142 - 149, 2014.

      [11]. T.Subramani, B.Saravanan., J.Jayalakshmi., “Dynamic Analysis Of Flanged Shear Wall Using Staad Pro", International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 150 - 155, 2014.

      [12]. T.Subramani, M.Subramani., K.Prasath.,"Analysis Of Three Dimensional Horizontal Reinforced Concrete Curved Beam Using Ansys" International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 156 - 161, 2014.

      [13]. T.Subramani., K.Bharathi Devi., M.S.Saravanan. , Suboth , Analysis Of RC Structures Subject To Vibration By Using Ansys,” International Journal of Engineering Research and Applications Vol. 4, Issue 12(Version 5), pp.45-54, 2014.

      [14]. T.Subramani., K.Bharathi Devi., M.S.Saravanan., Suboth Thomas, “Analysis Of Seismic Performance Of Rock Block Structures With STAAD Pro International Journal of Engineering Research and Applications Vol. 4, Issue 12(Version 5), pp.55- 68, 2014.

      [15]. T.Subramani., T.Krishnan., M.S.Saravanan.M , Suboth Thomas, “Finite Element Modeling On Behaviour Of Reinforced Concrete Beam Column Joints Retrofitted With CFRP Sheets Using Ansys” International Journal of Engineering Research and Applications Vol. 4, Issue 12(Version 5), pp.69 -76, 2014

      [16]. T.Subramani., S.Krishnan., M.S.Saravanan.M, Suboth Thomas “Analysis Of Retrofitting Non-Linear Finite Element Of RCC Beam And Column Using Ansys” International Journal of Engineering Research and Applications ,Vol. 4, Issue 12(Version 5), pp.77-87, 2014.

      [17]. T.Subramani, J.Jayalakshmi , " Analytical Investigation Of Bonded Glass Fibre Reinforced Polymer Sheets With Reinforced Concrete Beam Using Ansys" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 4, Issue 5, pp. 105-112 , 2015

      [18]. T.Subramani and M.Kavitha, “Analysis Of Reliability Of Steel Frame Systems With Semi-Rigid Connections Using Numerical Method And Finite Element Analysis”, International Journal of Applied Engineering Research (IJAER), Volume 10, Number 38,Special Issues, pp.28240-28246, 2015.

      [19]. T.Subramani, M.S.Saravanan, “Analysis Of Non Linear Reinforced And Post Tensioned Concrete Beams Using ANSYS”, International Journal of Applied Engineering Research (IJAER) International Journal of Applied Engineering Research (IJAER), Volume 10, Number 38 Special Issues, pp.28247-28252, 2015

      [20]. T.Subramani, K.Balamurugan , " Finite Element Anaylsis Of Composite Element For FRP Reinforced Concrete Slab By Using ANSYS" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 076-084 , 2016 .

      [21]. T.Subramani, V.Kanian Poonkundran , " Prefabricated Multistory Structure Exposure To Engineering Seismicity By Using SAP" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 123-131 , 2016 .

      [22]. T.Subramani, A.Kumaravel , " Analysis Of Polymer Fibre Reinforced Concrete Pavements By Using ANSYS" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 132-139 , 2016

      [23]. T.Subramani, R.Praburaj , " Pushover Anaylsis Of Retrofitted Reinforced Concrete Buildings By Using SAP" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 140-147 , 2016 .

      [24]. T.Subramani, M.Senthilkumar , " Finite Element Anaylsis Of RC Beams With Externally Bonded Simcon Laminates By Using ANSYS" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 148-155 , 2016

      [25]. T.Subramani, R.Vasanthi , " Earth Quake Resistant Building Using SAP" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 173-181 , 2016 .

      [26]. T.Subramani, A.Selvam , " Studies On Economical Configuration Of RCC And Prestressed Shell Roofs By Using ANSYS " , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 182-191 , 2016 .

      [27]. T.Subramani, A.Anbuchezian , " Experimental Investigation On Flexural Behavior Of Folded Ferro Cement Panels " , International Journal of Application or Innovation in Engineering & Management (IJAIEM), Volume 6, Issue 3, March 2017 , pp. 045-049 , ISSN 2319 - 4847.

      [28]. T.Subramani, A. Fizoor Rahman , " An Experimental Study On The Properties Of Pet Fibre Reinforced Concrete " , International Journal of Application or Innovation in Engineering & Management (IJAIEM), Volume 6, Issue 3, March 2017 , pp. 058-066 , ISSN 2319 - 4847.

      [29]. T.Subramani, S.Poongothai, S.Priyanka , " Analytical Study Of T Beam Column Joint Using FEM Software " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 148-156 , ISSN 2278-6856

      [30]. T.Subramani, R.Ganapathy,V.Manoharan, M.Balamurugan, R.Murugesan , " Design And Analysis Of Light Weight Concrete Building Using ETAB With Respect To Dynamic Loading " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 252-258 , ISSN 2278-6856.

      [31]. T.Subramani, A.Mohammed Ali, R.Karthikeyan, E.Panner Selvan , K.Periyasamy , " Analytical Study Of T-Beam Using ANSYS " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 259-266 , ISSN 2278-6856.

      [32]. T.Subramani, V.Kalaivanan, S.Priyaranjithkumar, P.Sasikumar, P.Vinoth Kumar , " Design And Analysis Of Multistorey Building With Respect To Seismic Loads Using ETABS " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 267-274 , ISSN 2278-6856.


 

View

Download

Article ID: 15632
 
DOI: 10.14419/ijet.v7i3.10.15632




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.