Analytical Study of Tall Building with Outtrigger System with Respect to Seismic and Wind Analysis Using ETABS

  • Authors

    • T Subramani
    • K Murali
    2018-07-15
    https://doi.org/10.14419/ijet.v7i3.10.15635
  • Analytical, Tall Building, Outtrigger System, Seismic and Wind Analysis, ETABS

  • Today the development of structural system goes beyond the unexpected level. To overcome the problems persist in the structural behavior numerous studies has routed out. On this present have a look at is targeted at the performance of multi outrigger structural system for a ten storey constructing with static and dynamic analyses of various fashions were examined the use of ETABS software program. The performance analysis of the tall building for distinctive fashions are performed to discover the surest function of outrigger gadget and belt truss with the aid of the usage of lateral loads. Time history analysis for floor movement statistics of the ten storey building version are carried out. The evaluation includes lateral displacement; storeys go with the flow and base shear for static and dynamic loading. From the acquired results the effective performance of building with outriggers are evaluated. Our project describes the structural layout of similar 10 storey the use of overall performance based totally strategies for seismic and wind movements.

     

     

     

  • References

    1. [1] T.Subramani, J.Jayalakshmi , " Analytical Investigation Of Bonded Glass Fibre Reinforced Polymer Sheets With Reinforced Concrete Beam Using Ansys" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 4, Issue 5, pp. 105-112 , 2015

      [2] T.Subramani. , S.Vishnupriya, “Finite Element Analysis of a Natural Fiber (Maize) Composite Beamâ€, International Journal of Modern Engineering Research, Volume. 4, Issue. 6 (Version 1), pp 1 – 7, 2014,

      [3] T.Subramani., R.Senthil Kumar, “Modelling and Analysis of Hybrid Composite Joint Using Fem in ANSYSâ€, International Journal of Modern Engineering Research, Volume 4, Issue 6 (Version 1), pp 41- 46, 2014.

      [4] T.Subramani, S.Sharmila, “Prediction of Deflection and Stresses of Laminated Composite Plate with Artificial Neural Network Aidâ€, International Journal of Modern Engineering Research, Volume 4, Issue 6 (Version 1), pp 51 -58, 2014.

      [5] T.Subramani., S.Sundar, M.Senthilkumar, “Investigation of the Behaviour for Reinforced Concrete Beam Using Non Linear Three Dimensional Finite Elementsâ€, International Journal of Modern Engineering Research, Volume. 4, Issue. 6 (Version 2), pp 13 -18, 2014,

      [6] T.Subramani, A.Arul, "Design And Analysis Of Hybrid Composite Lap Joint Using Fem" International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 5), pp 289- 295, 2014.

      [7] T.Subramani., J.Jothi,, M.Kavitha "Earthquake Analysis Of Structure By Base Isolation Technique In SAP", International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 5), pp 296 - 305, 2014.

      [8] T.Subramani., R.Manivannan.R, M.Kavitha, "Crack Identification In Reinforced Concrete Beams Using Ansys Software" ,International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 133 - 141, 2014.

      [9] T.Subramani., Reni Kuruvilla, J.Jayalakshmi., “Nonlinear Analysis Of Reinforced Concrete Column With Fiber Reinforced Polymer Bars" International Journal of Engineering Research and Applications Volume. 4, Issue. 6 (Version 5), pp 306- 316, 2014.

      [10] T.Subramani, D.Sakthi Kumar, S.Badrinarayanan. "Fem Modelling And Analysis Of Reinforced Concrete Section With Light Weight Blocks Infill " International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 142 - 149, 2014.

      [11] T.Subramani, B.Saravanan., J.Jayalakshmi., “Dynamic Analysis Of Flanged Shear Wall Using Staad Pro", International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 150 - 155, 2014.

      [12] T.Subramani, M.Subramani., K.Prasath.,"Analysis Of Three Dimensional Horizontal Reinforced Concrete Curved Beam Using Ansys" International Journal of Engineering Research and Applications, Volume. 4, Issue. 6 (Version 6), pp 156 - 161, 2014.

      [13] T.Subramani., K.Bharathi Devi., M.S.Saravanan. , Suboth , Analysis Of RC Structures Subject To Vibration By Using Ansys,†International Journal of Engineering Research and Applications Vol. 4, Issue 12(Version 5), pp.45-54, 2014.

      [14] T.Subramani., K.Bharathi Devi., M.S.Saravanan., Suboth Thomas, “Analysis Of Seismic Performance Of Rock Block Structures With STAAD Pro International Journal of Engineering Research and Applications Vol. 4, Issue 12(Version 5), pp.55- 68, 2014.

      [15] T.Subramani., T.Krishnan., M.S.Saravanan.M , Suboth Thomas, “Finite Element Modeling On Behaviour Of Reinforced Concrete Beam Column Joints Retrofitted With CFRP Sheets Using Ansys†International Journal of Engineering Research and Applications Vol. 4, Issue 12(Version 5), pp.69 -76, 2014

      [16] T.Subramani., S.Krishnan., M.S.Saravanan.M, Suboth Thomas “Analysis Of Retrofitting Non-Linear Finite Element Of RCC Beam And Column Using Ansys†International Journal of Engineering Research and Applications ,Vol. 4, Issue 12(Version 5), pp.77-87, 2014.

      [17] T.Subramani, J.Jayalakshmi , " Analytical Investigation Of Bonded Glass Fibre Reinforced Polymer Sheets With Reinforced Concrete Beam Using Ansys" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 4, Issue 5, pp. 105-112 , 2015

      [18] T.Subramani and M.Kavitha, “Analysis Of Reliability Of Steel Frame Systems With Semi-Rigid Connections Using Numerical Method And Finite Element Analysisâ€, International Journal of Applied Engineering Research (IJAER), Volume 10, Number 38,Special Issues, pp.28240-28246, 2015.

      [19] T.Subramani, M.S.Saravanan, “Analysis Of Non Linear Reinforced And Post Tensioned Concrete Beams Using ANSYSâ€, International Journal of Applied Engineering Research (IJAER) International Journal of Applied Engineering Research (IJAER), Volume 10, Number 38 Special Issues, pp.28247-28252, 2015

      [20] T.Subramani, K.Balamurugan , " Finite Element Anaylsis Of Composite Element For FRP Reinforced Concrete Slab By Using ANSYS" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 076-084 , 2016 .

      [21] T.Subramani, V.Kanian Poonkundran , " Prefabricated Multistory Structure Exposure To Engineering Seismicity By Using SAP" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 123-131 , 2016 .

      [22] T.Subramani, A.Kumaravel , " Analysis Of Polymer Fibre Reinforced Concrete Pavements By Using ANSYS" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 132-139 , 2016

      [23] T.Subramani, R.Praburaj , " Pushover Anaylsis Of Retrofitted Reinforced Concrete Buildings By Using SAP" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 140-147 , 2016 T.Subramani, M.Senthilkumar , " Finite Element Anaylsis Of RC Beams With Externally Bonded Simcon Laminates By Using ANSYS" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 148-155 , 2016

      [24] T.Subramani, R.Vasanthi , " Earth Quake Resistant Building Using SAP" , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 173-181 , 2016 .

      [25] T.Subramani, A.Selvam , " Studies On Economical Configuration Of RCC And Prestressed Shell Roofs By Using ANSYS " , International Journal of Application or Innovation in Engineering & Management (IJAIEM) , Volume 5, Issue 5, pp. 182-191 , 2016 .

      [26] T.Subramani, A.Anbuchezian , " Experimental Investigation On Flexural Behavior Of Folded Ferro Cement Panels " , International Journal of Application or Innovation in Engineering & Management (IJAIEM), Volume 6, Issue 3, March 2017 , pp. 045-049 , ISSN 2319 - 4847.

      [27] T.Subramani, A. Fizoor Rahman , " An Experimental Study On The Properties Of Pet Fibre Reinforced Concrete " , International Journal of Application or Innovation in Engineering & Management (IJAIEM), Volume 6, Issue 3, March 2017 , pp. 058-066 , ISSN 2319 - 4847.

      [28] T.Subramani, S.Poongothai, S.Priyanka , " Analytical Study Of T Beam Column Joint Using FEM Software " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 148-156 , ISSN 2278-6856

      [29] T.Subramani, R.Ganapathy,V.Manoharan, M.Balamurugan, R.Murugesan , " Design And Analysis Of Light Weight Concrete Building Using ETAB With Respect To Dynamic Loading " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 252-258 , ISSN 2278-6856.

      [30] T.Subramani, A.Mohammed Ali, R.Karthikeyan, E.Panner Selvan , K.Periyasamy , " Analytical Study Of T-Beam Using ANSYS " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 259-266 , ISSN 2278-6856.

      [31] T.Subramani, V.Kalaivanan, S.Priyaranjithkumar, P.Sasikumar, P.Vinoth Kumar , " Design And Analysis Of Multistorey Building With Respect To Seismic Loads Using ETABS " , International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Volume 6, Issue 3, May - June 2017 , pp. 267-274 , ISSN 2278-6856.

  • Downloads

  • How to Cite

    Subramani, T., & Murali, K. (2018). Analytical Study of Tall Building with Outtrigger System with Respect to Seismic and Wind Analysis Using ETABS. International Journal of Engineering & Technology, 7(3.10), 77-82. https://doi.org/10.14419/ijet.v7i3.10.15635