Electrospun composite fiber for liquefied petroleum gas sensing

  • Authors

    • T. Victoria Adeseluka Department of Industrial Chemistry,The Technical University
    • S. Oluwagbemiga Alayande Department of Physics, Bingham University, Karu
    • Emmanuel Ajenifuja Department of Science Laboratory Technology, Federal College of Agriculture, Ibadan
    • F. Joke Okparaocha Centre for Energy Research and Development, Obafemi Awolowo University
    • O. Fasakin Department of Physics and Engineering Physics, Obafemi Awolowo University, Ile Ife
    • J. Adegbindin Ajao Centre for Energy Research and Development, Obafemi Awolowo University
    2019-08-25
    https://doi.org/10.14419/ijet.v8i3.16072
  • Polymeric Wastes, Polymer Nanocomposite, Fibrous Scaffolds, Sensitivity, Liquefied Petroleum Gas.
  • Advancement in the volume of waste generated from polymers demands innovation on its’ management and re-use strategy. In this study, advance materials technique was used for polymeric wastes management, namely expanded polystyrene (EPS), discarded compact discs (polycarbonate (PC), these were electrospun with polyaniline (PANI) and zinc oxide (ZnO) to produce fibrous scaffolds. The fibrous scaffolds were characterized using Fourier Transform Infrared spectrometer (FTIR), Scanning Electron Microscopy (SEM), X-ray diffractometer and Differential Thermal Analysis (DTA). Due to it Ohmic property, resistivity sensing potential was explored for Liquefied Petroleum Gas (LPG). The fibre exhibited high sensitivity and short response time towards LPG at room temperature. This work presents a sustainable, affordable and effective pathway for re-using polymeric wastes as potential resistivity gas sensor.

     

     

  • References

    1. [1] Y.L. Tharpes, International Environmental Law: Turning the Tide on Marine Pollution.U Miami Inter-Am L Rev., 20, 3 (1989), pp. 579-614.

      [2] S. O. Alayande, A.Y. Fasasi, E. O. Dare, J.A. Ajao, D. Pelemo and G. A. Osinkolu, Recycling Polystyrene through Electrospinning Technique' Nigerian Journal of Material Science and Engineering, 3, (2012), 71-75.

      [3] S. O. Alayande, The development of nanoporous membranes for crude oil sorbent and spillage remediation (PhD Thesis) Federal University of Agriculture, (2015), Abeokuta, Nigeria.

      [4] S. O. Alayande, E. O. Dare, T. A.M. Msagati A. K. Akinlabi and P.O. Aiyedun, Novel Nanoporous Sorbent as Solid Phase extraction forPetroleum Fingerprinting, Journal of Applied Physic A, 122, (2016),4, 1-7. https://doi.org/10.1007/s00339-016-9931-z.

      [5] S.O.Alayande, E. O. Dare, T.A.M. Msagati, A. K. Akinlabi, and P.O. Aiyedun, Superhydrophobic and superoleophillic surface of porous beaded electrospun polystyrene and polystyrene-zeolite fiber for crude oil-water separation, Physics and Chemistry of the Earth, 92 (2016) 7-13. https://doi.org/10.1016/j.pce.2015.10.002.

      [6] S.O.Alayande, F.O.G. Olorundare., D. Nkosi E. O. Dare, T.A.M. Msagati, B.B. Mamba Superoleophillic electrospun polystyrene/exfoliated graphite fibre for selective removal of crude oil from water. Physics and Chemistry of the Earth, 92, (2016) 3-6 https://doi.org/10.1016/j.pce.2015.09.004.

      [7] S.O. Alayande, S. Olatubosun, S. Allo, O. Adedoyin, D. Olalekan, O. Sanda, A.Fasasi, O. Dare, J. Ajao, D. Pelemo and G.A. Osinkolu, Porous and non-porous electrospun Fibres from discarded extruded polystyrene Intl. Journal of Physical Sciences, 7,11, (2012), 1832-1836. https://doi.org/10.5897/IJPS11.1783.

      [8] S.O Alayande., E.O. Dare, A.K. Akinlabi, A.Y. Fasasi and G.A. Osinkolu Nanostructuring of waste polystyrene, Journal of Chem. Soc. of Nig., 38, 2, (2013) 79-82.

      [9] J. P. Seon., S. P. Chul and Y. Hyeonseok, Chemo-Electrical Gas Sensors Based on Conducting Polymer Hybrids, Polymers 9, (2017), 155 https://doi.org/10.3390/polym9050155.

      [10] S.S. Umare, B.H. Shambharkar and R.S. Ningthoujam, Synthesis and Characterization of Polyaniline-Fe3O4 Nanocomposite: Electrical Conductivity, Magnetic, Electrochemical Studies. Synthetic Metals, 160, 17-18, (2010), 1815- 1821. https://doi.org/10.1016/j.synthmet.2010.06.015.

      [11] P.K. Karin, Chemical gas sensors based on organic semiconductor polypyrrole, Crit. Rev. Anal. Chem. 32, (2002), 121–140. https://doi.org/10.1080/10408340290765489.

      [12] J.J. Miasik, A. Hooper, B.C. Tofield, Conducting polymer gas sensors, J. Chem. Soc., Faraday Trans. 82, (1986), 1117–1126. https://doi.org/10.1039/f19868201117.

      [13] F. Zee, J.W. Judy, Micro machined polymer-based chemical gas sensor array, Sens. Actuators B, 72, (2001), 120–128. https://doi.org/10.1016/S0925-4005(00)00638-9.

      [14] H. Yoon, J. Jang, Conducting-polymer nanomaterials for high-performance sensor applications: Issues and challenges, Adv. Funct. Mater. 19, (2009), 1567–1576. https://doi.org/10.1002/adfm.200801141.

      [15] H. Yoon, Current trends in sensors based on conducting polymer nanomaterials, Nanomaterials, 3, (2013) 524–549. https://doi.org/10.3390/nano3030524.

      [16] X.F. Lu, W.J. Zhang, C. Wang, T.C. Wen, Y. Wei, One-dimensional conducting polymer nanocomposites: Synthesis, properties and applications. Prog. Polym. Sci. 36, (2011), 671-712. https://doi.org/10.1016/j.progpolymsci.2010.07.010.

      [17] A.T. Rajesh, D. Kumar, Recent progress in the development of nano-structured conducting polymers/nanocomposites for sensor applications, Sens. Actuator B Chem. 136, (2009), 275–286. https://doi.org/10.1016/j.snb.2008.09.014.

      [18] Y.S. Lee, B.S. Joo, N.J. Choi, J.O. Lim, J.S. Huh, and D.D. Lee “Visible optical sensing of ammonia based on polyaniline film, Sensors and Actuators B, 93, 1–3, (2003), 148–152. https://doi.org/10.1016/S0925-4005(03)00207-7.

      [19] J. Yue, Z.H. Wang, K.R. Cromack, A.J. Epstein, A.G. MacDiarmid, Effect of sulfonic acid group on polyaniline backbone, Journal of the American Chemical Society 113, (2003), 2665–2671. https://doi.org/10.1021/ja00007a046.

      [20] B. Alessio, D. Maximilian, L.N. Pierandrea, B. Piero, Synthesis and characterization of zinc oxide nanoparticles: application to textiles as UV-absorbers, J Nanopart. Res. 10, (2008), 679–689. https://doi.org/10.1007/s11051-007-9318-3.

      [21] A. Frenot, I.S. Chronakis, Polymer nanofibers assembled by electrospinning, Current Opinion in Colloid & Interface Science, 8, (2003), 64-75. https://doi.org/10.1016/S1359-0294(03)00004-9.

  • Downloads

  • How to Cite

    Victoria Adeseluka, T., Oluwagbemiga Alayande, S., Ajenifuja, E., Joke Okparaocha, F., Fasakin, O., & Adegbindin Ajao, J. (2019). Electrospun composite fiber for liquefied petroleum gas sensing. International Journal of Engineering & Technology, 8(3), 146-154. https://doi.org/10.14419/ijet.v8i3.16072