Data Monitoring System for Micro-Wind Turbine Experimental Set Based on LabVIEW

  • Authors

    • Napat Watjanatepin
    2018-07-04
    https://doi.org/10.14419/ijet.v7i3.7.16262
  • Data Monitoring System, LabVIEW, Micro-Wind Turbine, Experimental set
  • The Wind Turbine Energy System (WTES) was applied to a micro-scale laboratory experimental set. Thus, there is a need to develop a data monitoring system in order to be applicable with the Wind Turbine Energy System. The aim of this study is to design and develop the data monitoring system for the Micro-Wind Turbine (MWT) experimental set, and to test the real time output and analyse the obtained results. The MWT output power is 100 watts 12 VDC with the cut-in speed is 3 m/s. The WTES consists of MWT, DC converter, and a Grid-connected inverter.  This data monitoring system will be based on LabVIEW environment. The NI-9215 NI-9226, NI 9203, NI 9225, NI 9401 with chassis NI 9178 data acquisition devices were applied. The data monitoring program was developed by LabVIEW2013. The LabVIEW based data monitoring system has successfully met the objective of this study. It is capable of providing real time acquisition of the wind speed, electrical current, voltage and power of the Micro-Wind Turbine Energy System. Moreover, the software can generate a report from the MySQL data based via Microsoft office automatically.   

     

     

  • References

    1. [1] The GWEC website. [Online]. Available: http://www.gwec.net/global-figures/wind-energy-global-status/

      [2] N. Khera and S. Jain, "Development of LabVIEW based electrical parameter monitoring system for single phase supply," 2015 Communication, Control and Intelligent Systems (CCIS), Mathura, 2015, pp. 482-485.

      [3] B.Jagathdarani and K. Jaiganesh, "Elevating the efficiency of the solar G2GPVT system by inherent cooling method and monitoring using LabVIEW," 2016 2nd International- Conference-on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics (AEEICB),Chennai, 2016, pp. 525-529.

      [4] S. Chabchoub, S. Mansouri and R. Ben Salah,"Biomedical monitoring system using LabVIEWFPGA," 2015 World Congress on Information Technology and Computer Applications (WCITCA), Hammamet,2015, pp. 1-5.

      [5] Haider-e-Karar, A. A. Khuwaja and A. Sattar, "Solar power remote monitoring and controlling using Arduino, LabVIEW and web browser," 2015 Power Generation System and Renewable Energy Technologies (PGSRET), Islamabad, 2015, pp. 1-4.

      [6] Chokri Belhadj Ahmed, Mahmoud Kassas, Syed Essamuddin Ahmed, LabVIEW Based PV Panel Online Characteristics and Parameters Estimation, Procedia Computer Science, Volume 52, 2015, Pages 876-882.

      [7] N. Kumar, N. Singh and A. Kulkarni, "LabVIEW based online monitoring and control of PMDC motor speed," 2014 6th IEEE Power India International Conference (PIICON), Delhi,2014,pp. 1-4.

      [8] Ye Yu, Yangan Zhang, Xueguang Yuan,Qingxiang Hou, A LabVIEW-based real-time measurement system for polarization detection and calibration, Optik- International Journal for Light and Electron Optics, Volume 125, Issue 10,May 2014, Pages 2256-2260.

      [9] J. Stuchlý, J. Vramba and S. Mišák, "Monitoring of hybrid system using Labview," 2013 13th International Conference on Environment and Electrical Engineering (EEEIC), Wroclaw, 2013, pp.42-47.

      N. Watjanatepin and S. Sodajaroen. Velocity Adjustable Wind Turbine Simulator based on Actual Wind Generator for Laboratory Use, International Journal of Engineering and Technology. 2017, Vol. 8, No 6. pp. 2392-2402
  • Downloads

  • How to Cite

    Watjanatepin, N. (2018). Data Monitoring System for Micro-Wind Turbine Experimental Set Based on LabVIEW. International Journal of Engineering & Technology, 7(3.7), 160-163. https://doi.org/10.14419/ijet.v7i3.7.16262