Characterization of Car Wash Wastewater from Manually dispersed, Snow and Auto Car Wash Stations

  • Authors

    • Muhammad Shahrul Shafendy Bin Ibrahim
    • Nor Haslina Hashim
    2018-08-09
    https://doi.org/10.14419/ijet.v7i3.23.17257
  • Car wash wastewater, organic contaminants, anions, heavy metals.

  • Abstract

    Although commonly perceived lightly in the eye of public, car wash wastewater should be taken more seriously as they have the tendency to be harmful and toxic not only towards the environment, but also humans. In this study, car wash wastewater samples were taken from three stations in Johor with different cleaning methods; manually-dispersed car wash (MCW), snow car wash (SCW) and auto car wash (ACW). At each station, samples were taken during the initial rinsing (IR), and final rinsing (FR) of the vehicles. The samples taken were analyzed for its pH, chemical oxygen demand (COD), biological oxygen demand (BOD), oil and grease (O&G), total suspended solids (TSS), anions (anionic surfactant, nitrate, sulphate, chloride, fluoride, orthophosphate) and heavy metals (iron, zinc, magnesium, chromium, manganese, copper, lead, silver). The results obtained shows that there appears to be no specific pattern to differentiate between the IR and FR samples due to the different washing methods, chemicals and equipment used. The level of contamination of the car wash wastewater was SCW>MCW>ACW. Overall, the result shows that some of the samples did not pass the standard discharge limit; pH, COD, BOD, O&G, TSS, AS and Fe. This shows that car wash wastewater produced in the cleaning activities should be given more concern and need to be treated before being released to the water body.

     

     

  • References

    1. [1] Bhatti, Z. A., Mahmood, Q., Raja, I. A., Malik, A. H., Khan, M. S., and Wu, D. Chemical oxidation of carwash industry wastewater as an effort to decrease water pollution. Physical Chemistry Earth, Volume 36, no. 9–11, (2011) pp. 465–469.

      [2] Shahbazi R., Kasra-Kermanshahi, R., Gharavi, S., Moosavi- Nejad, Z., and Borzooee, F. Screening of SDS-degrading bacteria from car wash wastewater and study of the alkylsulfatase enzyme activity. Iranian Journal of Microbiology, Volume 5, no. 2, (2013), pp. 153–158.

      [3] Oknich, J. The Perceived Environmental Impact of Car Washing. Ramsey-Washington Metro Watershed District, (2002).

      [4] Lau, W. J., Ismail, A. F., and Firdaus, S. Car wash industry in Malaysia: Treatment of car wash effluent using ultrafiltration and nanofiltration membranes. Separation and Purification Technology, Volume 104, (2013), pp. 26–31.

      [5] Yasin, S., Iqbal, T., Arshad, Z., Rustam, M., and Zafar, M. Environmental Pollution From Automobile Vehicle Service Stations. Volume 8, no. I, (2012), pp. 61–70.

      [6] Kiran, S. A., Arthanareeswaran, G., Thuyavan, Y. L., and Ismail, A. F. Influence of bentonite in polymer membranes for effective treatment of car wash effluent to protect the ecosystem. Ecotoxicology Environment Saf., (2015), pp. 1–7.

      [7] Hashim, N. H. Pollutants Characterization of Car Wash Wastewater. Volume 8, (2016), pp. 4–9.

      [8] Maya Saphira Radin Mohamed R., Mariam Ibrahim Kutty, N. A., and Hashim Mohd Kassim, A.. Efficiency of Using Commercial and Natural Coagulants in Treating Car Wash Wastewater Treatment. Australian Journal of Basic Applcation Science, Volume 8, no. 816, (2014), pp. 227–234.

      [9] Jönsson, C. and Jönsson, A.S. The influence of degreasing agents used at car washes on the performance of ultrafiltration membranes. Desalination, Volume 100, no. 1–3, (1995), pp. 115–123.

      [10] Mayer, T. Environmental characterization of surface runoff from three highway sites in Southern Ontario , Canada : 2. Toxicology, (2011), pp. 121–136.

      [11] Foo, K. Y. and Hameed, B. H. Decontamination of textile wastewater via TiO2/activated carbon composite materials. Advanced Colloid Interface Science, Volume 159, no. 2, (2010), pp. 130–143.

      [12] Kwach, B. O. and Lalah, J. O. High concentrations of polycyclic aromatic hydrocarbons found in water and sediments of car wash and kisat areas of Winam Gulf, Lake Victoria-Kenya. Bull. Environmental Contamination Toxicology, Volume 83, no. 5, (2009), pp. 727–733.

      [13] Wu, L., Ge, G., and Wan, J. Biodegradation of oil wastewater by free and immobilized Yarrowia lipolytica W29. Journal of Environmental Science, Volume 21, no. 2, (2009), pp. 237–242.

      [14] Droste, R. L., Theory and Practice of Water and Wastewater Treatment. John Wiley & Sons, Inc., 1997.

      [15] Song, H. O., Zhou, Y., Li, A. M., and Mueller, S. Selective removal of nitrate by using a novel macroporous acrylic anion exchange resin. Chinese Chem. Lett., Volume 23, no. 5, (2012), pp. 603–606.

      [16] Awual, M. R. and Jyo, A. Assessing of phosphorus removal by polymeric anion exchangers. Desalination, Volume 281, no. 1, (2011), pp. 111–117.

      [17] Su, Y., Cui, H., Li, Q., Gao, S., and Shang, J. K. Strong adsorption of phosphate by amorphous zirconium oxide nanoparticles. Water Resource, Volume 47, no. 14, (2013), pp. 5018–5026.

      [18] Almeida, C. M. V. B., Borges, D., Bonilla, S. H., and Giannetti, B. F. Identifying improvements in water management of bus-washing stations in Brazil. Resource Conserv. Recycle, Volume 54, no. 11, (2010), pp. 821–831.

      [19] Gordon, B., Callan, P., and Vickers, C. WHO guidelines for drinking-water quality. WHO Chron., Volume 38, no. 3, (2008), pp. 564.

      [20] Abagale, P. T., Sarpong, F. K., Ojediran, D. A., Osei-Agyemang, Shaibu, J. O., R. and Birteeb, A. G. Heavy Metal Concentration In Wastewater From Car Washing Bays Used For Agriculture In The Tamale Metropolis, Ghana. Int. Journal of Curr. Res., Volume 5, no. 6, (2013), pp. 1571–1576.

      [21] Nguyen, H. Manufacturing Processes and Engineering Materials Used in Automotive Engine Block. Material Science Engineering Sect. B, EGR250, (2005), pp. 11–23, 2005.

      [22] Argun, M. E., Dursun, S., Ozdemir, C., and Karatas, M. Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics. Journal of Hazardous Materials, Volume 141, no. 1, (2007), pp. 77–85.

      [23] Al-Odwani, A., Ahmed, M., and Bou-Hamad, S. Carwash water reclamation in Kuwait. Desalination, Volume 206, no. 1–3, (2007), pp. 17–28.

      [24] Issabayeva, G., Aroua, M. K., and Sulaiman, N. M. Continuous adsorption of lead ions in a column packed with palm shell activated carbon. Journal of Hazardous Materials, Volume 155, no. 1–2, (2008), pp. 109–113.

      [25] Ajmal, M., Hussain, Khan A., Ahmad, S., and Ahmad, A. Role of sawdust in the removal of copper(II) from industrial wastes. Water Resource, Volume 32, no. 10, (1998), pp. 3085–3091.

  • Downloads

  • How to Cite

    Shahrul Shafendy Bin Ibrahim, M., & Haslina Hashim, N. (2018). Characterization of Car Wash Wastewater from Manually dispersed, Snow and Auto Car Wash Stations. International Journal of Engineering & Technology, 7(3.23), 45-48. https://doi.org/10.14419/ijet.v7i3.23.17257

    Received date: 2018-08-09

    Accepted date: 2018-08-09

    Published date: 2018-08-09