Simulation of Energy Dump Converter Topology for Switched Reluctance Motors

  • Authors

    • A Ayob
    • S Abd Halim
    • Y Yusof
    2018-08-13
    https://doi.org/10.14419/ijet.v7i3.15.17510
  • converters, resistor dump, switched reluctance motor,

  • Abstract

    The switched reluctance machine (SRM) is the least expensive machine to produce yet it is very reliable.  An SRM drive system has to be designed so that there is integration between the machine and the converter-controller configuration. This paper focuses on the resistor dump converter topology where most of the energy from the windings is dissipated in a resistor. A detailed analysis and simulation of the converter has been conducted and a design guideline for the proposed converter is laid out.  The resistor dump converter has a low component count and this enables it to achieve a low cost converter.  Simulation results show that for the resistor dump converter additional snubbers are required.  This leads to an increase in complexity of the controller as more parameters need to be considered.  Also, the addition of the passive components of the snubber makes the circuit less reliable and costly. For the purpose of just looking into detail on the behaviour of the converter, it is sufficient to look at the results of the simulation using a static inductor to model the SP-SRM.  If cost is to be the priority, the most economical choice must be made but within limits of the application.

     

  • References

    1. [1] Ding, W., S. Yang, and Y. Hu. (2008) A novel boost converter for segmented-stator hybrid-excitation switched reluctance motor drive with high performance. in 2018 IEEE Applied Power Electronics Conference and Exposition (APEC).

      [2] Zalke, R.D. and A.G. Thosar. (2017) C-dump converter for switched reluctance motor. in 2017 2nd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT).

      [3] Greg, P.:' The Rise of VSR Motors', Mechanical Engineering. 1998. p. 86-87.

      [4] Emadi, A., Rajashekara, K., Williamson, S. S., and Lukic, S. M. A.-L., S.M., (2005) Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations, Vehicular Technology, IEEE Transactions on, 54, pp. 763-770.

      [5] Rahman, K. M., Fahimi, B., Suresh, G., Rajarathnam, A. V. A.-R., A.V., and Ehsani, M. A.-E., M., (2005) Advantages of switched reluctance motor applications to EV and HEV: design and control issues, IEEE Trans. Ind. Appl., 36, pp. 111-121.

      [6] Vukosavic, S., and Stefanovic, V. R., (1991) SRM inverter topologies: a comparative evaluation, IEEE Trans. Ind. Appl., 27, pp. 1034-1047.

      [7] Alaee, M. M., Afjei, E., and Ataei, S., (2007) A New Resonant Driver for Switched Reluctance Motor", Electrical Engineering, 2007. ICEE '07. International Conference on Electrical Engineering, VO -, 2007, pp. 1-3.

      [8] Yang, A. Y., Zhang, B. Y., and Wang, C. S., (2007) Four-Quadrant Control of DSP-based Switched Reluctance Drives for EV", Industrial Electronics and Applications, 2007. ICIEA 2007. 2nd IEEE Conference on Industrial Electronics and Applications, 2007. ICIEA 2007. 2nd IEEE Conference on VO -, 2007, pp. 2162-2167.

      [9] Davis, R. M., Ray, W. F., and Blake, R. J., (1981) Inverter drive for switched reluctance motor: circuits and component ratings", Proc. Ins. Elec. Eng., pp. 126-136.

      [10] Cai, W., Pillay, P., Tang, Z., and Omekanda, A. M. A.-O., A.M., (2003) Low-vibration design of switched reluctance motors for automotive applications using modal analysis, IEEE Trans. Ind. Appl., 39, pp. 971-977.

      [11] Pollock, C., and Wu, C.-Y., 91997) Acoustic noise cancellation techniques for switched reluctance drives, IEEE Trans. Ind. Appl., 33, pp. 477-484.

      [12] Radun, A. V., (1992) High-power density switched reluctance motor drive for aerospace applications, IEEE Trans. Ind. Appl., 28, pp. 113-119.

      [13] Naayagi, R. T., and Kamaraj, V., (2005) Shape optimization of switched reluctance machine for aerospace applications, Industrial Electronics Society, 2005. IECON 2005. 31st Annual Conference of IEEE Industrial Electronics Society, 2005 VO -, pp. 4.

      [14] Forrest, S. J., Wang, J., Jewell, G. W., Johnson, C. M. A.-J., C.M., and Calverley, S. D. A.-C., S.D., (2006) Analysis of an AC fed direct converter for a switched reluctance machine in aerospace applications, Power Electronics and Motion Control Conference, 2006. IPEMC '06. CES/IEEE 5th International Power Electronics and Motion Control Conference, 2006. IPEMC '06. VO - 2, pp. 1-6.

      [15] Ayaz, M., and Yildiz, A. B., (2006) Control of Switched Reluctance Motor Containing a Linear Model, Control and Automation, 2006. MED '06. 14th Mediterranean Conference on Control and Automation, 2006. MED '06. VO -, pp. 1-6.

      [16] Qiong-Zhong, Mo, C. Y.-F., and Meng, G., (2006) Dymola-based modelling of SRD in aircraft electrical system, IEEE Trans. Aerospace & Electronic Syst., 42, pp. 220-227.

      [17] Inderka, R. B., Menne, M., and De Doncker, R. W. A. A., (2002) Control of switched reluctance drives for electric vehicle applications, IEEE Trans. Ind. Electronics, 49, pp. 48-53.

      [18] Sun, Q., et al., (2018) Modular Full-Bridge Converter for Three-Phase Switched Reluctance Motors with Integrated Fault-Tolerance Capability. IEEE Transactions on Power Electronics: p. 1-1.

      [19] Yuen-Chung, K., Yong-Ho, Y., Byoung-Kuk, L., Jin, H., and Chung-Yuen, W., (2006) A New Cost Effective SRM Drive using Commercial 6-Switch IGBT Modules, Power Electronics Specialists Conference, 2006. PESC '06. 37th IEEE, pp. 1-7

      [20] Krishnan, R., S-Y, P., and Ha, K., (2004) Theory and operation of a four quadrant switched reluctance motor drive with a single controllable switch- the lowest cost four quadrant brushless motor drive, Industry Applications Conference, 2004. 39th IAS Annual Meeting. Conference Record of the 2004 IEEE, pp. 1610-1617 vol.3.

      [21] Krishnan, R., and Materu, P. N., (1993) Analysis and design of a low-cost converter for switched reluctance motor drives, IEEE Trans. Ind. Appl., 29, pp. 320-327.

      [22] Le-Huy, H., Viarouge, P., and Francoeur, B., (1989) A novel unipolar converter for switched reluctance motor, Power Electronics Specialists Conference, 1989. PESC '89 Record., 20th Annual IEEE, pp. 3-10 vol.1.

      [23] Barnes, M., and Pollock, C., (1998) Power electronic converters for switched reluctance drives, IEEE Trans. Power Electronics, 13, pp. 1100-1111.

      [24] Gordon, B. M., Rajamani, H. S., and McMahon, R. A., (1996) An Investigation Of Bifilar Wound Three-phase Induction Motor Drives Operating With Only Low Side Switches, Power Electronics and Variable Speed Drives, 1996. Sixth International Conference on (Conf. Publ. No. 429), Malaysia, pp. 413-418

      [25] Jakobsen, U., et al., Sensorless Control of Low-Cost Single-Phase Hybrid Switched Reluctance Motor Drive. IEEE Transactions on Industry Applications, 2015. 51(3): p. 2381-2387.

      [26] Staley, A. M., and Krishnan, R., (2005) Single controllable switch power converter for SRM drive systems, Industrial Electronics Society, 2005. IECON 2005. 32nd Annual Conference of IEEE, pp. 6 p.p.

      [27] Bose, B. K., (2000) Energy, environment, and advances in power electronics, IEEE Trans. Power Electronics, 15, pp. 688-701.

  • Downloads

  • How to Cite

    Ayob, A., Abd Halim, S., & Yusof, Y. (2018). Simulation of Energy Dump Converter Topology for Switched Reluctance Motors. International Journal of Engineering & Technology, 7(3.15), 99-104. https://doi.org/10.14419/ijet.v7i3.15.17510

    Received date: 2018-08-14

    Accepted date: 2018-08-14

    Published date: 2018-08-13