Multi-Scale Principal Component Analysis for the Fault Detection and Isolation in Induction Motors
-
2018-08-24 https://doi.org/10.14419/ijet.v7i3.31.18206
-
Induction motor, multi-scale principal component analysis, side-band frequencies, wavelet analysis. -
Abstract
Induction motors, though rugged, undergo faults due to wear and tear in their operation. Some faults have the characteristic property of influencing the stator current frequencies. Some side-band frequencies can be observed in the case of such faults. In this paper, a Multi-Scale Principal Component Analysis which combines wavelet analysis with principal component analysis has been applied to the data obtained from the simulation model of an induction motor. A 3-level decomposition of the data is performed and the principal component analysis is applied to high-frequency and low-frequency components of the data at various levels. The results suggest the use of the scheme for timely detection and identification of the faults which would endanger the motor from the otherwise possible destruction. It has also been proved that the scheme has the capability of detecting the sensor faults also, in addition to the motor faults.
Â
Â
-
References
[1] Cesarde coasta, Masamori kashiwgi, “Mauro hugomathias “Rotor failure detection of induction motor by wavelet transform and Fourier transformâ€, Case Studies in Mechanical Systems and Signal Processing 1 (2015) 15–26.
[2] Mohamed E., Hachemi Benbowid., “A Review of Induction Motor Signature Analysis BE a Medium for Faults Detectionâ€, IEEE Tram. Ind Eletronics. 47, 5, (2000).
[3] H. Douglas, P. Pillay, A. K. Ziarani, “A New Algorithm for Transient MCSA Using Waveletsâ€, IEEE Transactions on Industry Applications, 40, 5, (2004).
[4] Bashir Mahdiebrahimi, Novel indices for broken rotor bar fault diagnosis in induction motor using wavelet transformâ€, Mechanical systems and signal processing., 30, (2012), 131-145.
[5] Yvon Tharrault, Gilles Mourot, José Ragot, Didier Maquin. “Fault detection and isolation with robust principal component analysisâ€, 16th Mediterranean Conference onControl and Automation, 18, 4, (2008), 429–442.
[6] Siti Nur Suhaila Mirin, Norhaliza Abdul Wahab, “fault detection and montoring using multi scale pca†IEEE 4th Control and System Graduate Research Colloquium, (2013), 19 – 20.
[7] Ye Zhongming. "A review on induction motor online fault diagnosis", Proceedings IPEMC 2000 Third International Power Electronics and Motion Control Conference, (2000).
[8] Partha Sarathee, Prakash Mangal, “Fault diagnostic and monitoring methods of induction motor: a review,†International Journal of Applied Control, Electrical and Electronics Engineering, (2013) 1-18.
[9] Malik Abadulrazzaq Alsaedi, “Fault Diagnosis of Three-Phase Induction Motor: A Review, Optics†Special Issue: Applied Optics and Signal Processing.4, 1-1, (2015), 1-8. doi: 10.11648/j.optics.s.2015040101.11
[10] Jackson, J.E. “a user’s guide to principal components†Wiley-Interscience, New York, (2003)
[11] Misra M., "Multivariate process monitoring and fault diagnosis by multi-scale PCA", Computers and Chemical Engineering, (2002), 0915
[12] Jackson, J., Mudholkar “Control procedures for residuals associated with principal component analysisâ€. , Technometrics, 21, 341–349.
[13] Manish M., Yuea H. H., Qin S. J., Ling B., “multivariate process monitoring and fault diagnosis by multi-scale pcaâ€, Computers & Chemical Engineering, 26, (2002), 1281–1293.
[14] Wang, Zhanfeng, Hailian Du, Feng Lv, and Wenxia Du. "The fault detection of multisensor based on multi-scale PCA" , 25th Chinese Control and Decision Conference (CCDC), (2013).
-
Downloads
-
How to Cite
Venkata Navya Repaka, N., & Sagar Yellapu, V. (2018). Multi-Scale Principal Component Analysis for the Fault Detection and Isolation in Induction Motors. International Journal of Engineering & Technology, 7(3.31), 86-92. https://doi.org/10.14419/ijet.v7i3.31.18206Received date: 2018-08-25
Accepted date: 2018-08-25
Published date: 2018-08-24