Development of Test Rig for Centrifugal Air Strainer

  • Authors

    • Karthick N
    • Gayathri N
    • Babu T V B
    • Nandhakumar S
    • Mugunthan S
    • Yuvaraj B
    2018-09-01
    https://doi.org/10.14419/ijet.v7i3.34.18714
  • Air strainer, Human Error, Semi-automatic method, Test rig

  • This paper is a description of an alternative method for the testing of air strainer in the railways. In traditional method they can’t test the filter with full accuracy, so semi-automatic method is needed to check the sealing of the filter effectively. Test rig is used to check the sealing of the air strainer. This paper addresses two major issues from the previous method of testing.

    (1)     Requirement of skilled labors in work.

    (2)     Precise inspection is   not possible.

     The test rig being used currently requires more setting up time and the cost of the process is more. This paper describes a test rig which can reduce cost of the process and be able to reduce the human error by semi-automatic method.

     

     

  • References

    1. [1] Alireza bahadori, “Oil and gas pipelines and piping systemâ€, Vol. 12, (2009), pp.1-13.

      [2] Benedikt Györfi , Oliver jMaier & Jürgen Wrede, “In-depth analysis of bicycle hydraulic disc brakesâ€, Vol. 15, ( 2017), pp. 310-323.

      [3] Jianhui Zhao, Meiling Wang, Zhangjun Wang, Tao Qiu & Xiuzhenma, “Different boost voltage effects on the dynamic response and energy losses of high-speed solenoid valvesâ€, Vol. 15, (2017), pp. 1- 29.

      [4] JIN Yuzhen, DENG Ruoyu, JIN Yingzi & HU Xudong, “Research on the Response Characteristics of Solenoid Valve of the Air-jet Loom by Simulationâ€, Vol.22, (2013), pp. 606-612.

      [5] Muhammad Shahzad & Afzal Tongwen Chen, “Analysis and Design of Multimode Delay-Timersâ€, Vol. 28, (2017), pp.1-31.

      [6] Magdalena Mazura, “Assessment of the construction welding processâ€, Vol. 11, (2017), pp. 580-585.

      [7] Nikhil T, Chandrahas T & Chaitanya C, “Design and Development of a Test-Rig for Determining Vibration Characteristics of a Beamâ€, Vol. 17, (2016), pp.312-320.

      [8] Naseeb Ahmed Adnana, Yue Chenga, Iman Izadi B & Tongwen Chen, “Study of generalized delay-timers in alarm configurationâ€, Vol. 20, (2013), pp. 382-395.

      [9] S.Bharath, B. C. Nakra & K. N. Gupta, “Modelling and analysis of pneumatic railway brake systemâ€, Vol. 14, (1990), pp. 59-66.

      [10] Yongheng Zhang, Xing Jin & Mei He, “The convective heat transfer characteristics on outside surface of vehicle brake discâ€, Vol. 10, (2017), pp. 366-376.

  • Downloads

  • How to Cite

    N, K., N, G., T V B, B., S, N., S, M., & B, Y. (2018). Development of Test Rig for Centrifugal Air Strainer. International Journal of Engineering & Technology, 7(3.34), 49-52. https://doi.org/10.14419/ijet.v7i3.34.18714