A Review of Mobile Oil Skimmer

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    This project work is implemented based on the public issue which has overcome by our people on January 2017 at Ennore Chennai, Tamilnadu, India. The oil skimmer is used to separate oil, from mixtures of aqua and oil. It causes highly acidic alkaline and salty environment remains a great challenge to aquatic organisms and also pollutes the coastal areas. Every year 706 million gallons of waste oil enters the water resources and pollute the environment. Sea water has been polluted due to oil spillage; it also affects the water bodies. If the oil spill increases it results in serious damage to environment. About 90% of contaminated oil can be removed by continuous separation of oil by skimmer belt. This set-up uses polyurethane belt, bearing, supporting L-angle frame, EN 19 Rod & Scraper. This work implemented to improve the separation efficiency of the skimmer belt at manual speeds.

     

     


  • Keywords


    Skimmer belt, Bearing, Supporting L-angle frame, EN 19 Rod, Scraper and Oil properties.

  • References


      [1] Prof. Patel et.al. (2017) “Design and fabrication of oil skimmer” International Research Journal of Engineering and Technology, Vol. 04, issue 05, pp. 2282-2284.

      [2] Prof. Suraj Nair et.al. (2017) “Design and Fabrication of disc type oil skimmer” International Journal for Scientific Research & Development, Vol. 03, issue 04, pp.628-631.

      [3] Naveen V Devanagoudar & Hemanth Kumar TR.(2014) “Fabrication of oil separator in industry” International Journal of Science and Research ,Vol. 03, issue 06, pp.56-57.

      [4] Prof. Kuber K.H et.al. (2016) “Oil skimmer mechanism in sugar factory” International Journal of Mechanical and Industrial Technology, Vol. 03, issue 02, pp.174-176.

      [5] Mamta Patel (2015) “Design and efficiency comparison of various belt type oil skimmer” International Journal of Science and Research, Vol .04, issue 01, pp.998-1002.

      [6] Raju Merugu et.al. (2016) “Oil skimmer” International Journal of Research in Advent Technology, Vol. 04, issue 03, pp.53-55.

      [7] Prof.A.S. Patil et.al (2015) “Endless belt type oil skimmer” International Journal of Recent Research in Civil and Mechanical Engineering, Vol. 02, issue 01, pp.95-100.

      [8] V Sathiyamoorthy and T sekar (2016) “Optimisation of processing parameters in ECM of AISI 202 using multi objective genetic algorithm” International Journal of Enterprise Network Management 7 (2), 133-141.


 

View

Download

Article ID: 18716
 
DOI: 10.14419/ijet.v7i3.34.18716




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.