Propagation Characteristics of Debris Flows Considering Entrainment Effect
-
2018-09-01 https://doi.org/10.14419/ijet.v7i3.34.18787 -
Debris flow, Entrainment, Numerical simulation, Froude number, Propagation length -
Abstract
Background/Objectives: Due to the extreme climate and the localized heavy rain, the frequency of debris flow has been increasing. Therefore, there is a growing expectation for accurate numerical analysis.
Methods/Statistical analysis: We present a prediction method that can calculate the propagation length of the debris flow. This analysis indicates the relationship between the potential energy and the propagation length of the debris flow. To study the behavior of the debris flow accurately, the change in the momentum force must be considered; otherwise the calculation accuracy of the debris flow behavior is inevitably low.
Findings: Entrainment is a common behavior in a debris flow that leads to changes in the momentum force. Here, we analyzed the change in the momentum force using a 2D simulation model that included entrainment. The results show how the debris flow behaves with changes in the momentum force. When entrainment is considered, the propagation length tends to be underestimated. With detailed information, the uncertainty in the prediction accuracy can be reduced.
Improvements/Applications: If studies on the material properties of debris flow would be added, it will be possible to carry out various and accurate analysis of the debris flow
Â
Â
-
References
[1] Jakob, M., Hungr, O., &Jakob, D. M. (2005). Debris-flow hazards and related phenomena (Vol. 739). Berlin: Springer.
[2] Turnbull, B., Bowman, E. T., & McElwaine, J. N. (2015). Debris flows: experiments and modelling. ComptesRendus Physique,16(1), 86-96.
[3] Hungr, O., Morgan, G. C., & Kellerhals, R. (1984). Quantitative analysis of debris torrent hazards for design of remedial measures. Canadian Geotechnical Journal, 21(4), 663-677.
[4] Takahashi, T., & Nakagawa, H. (1991). Prediction of stony debris flow induced by severe rainfall. Journal of the Japan Society of Erosion Control Engineering, 44(3), 12-19.
[5] Takahashi, T. (2014). Debris flow: mechanics, prediction and countermeasures. CRC press.
[6] Schürch, P., Densmore, A. L., Rosser, N. J., Lim, M., &McArdell, B. W. (2011). Detection of surface change in complex topography using terrestrial laser scanning: application to the Illgraben debrisâ€flow channel. Earth Surface Processes and Landforms, 36(14), 1847-1859.
[7] Gregoretti, C., Adams, M. S., Hagen, K., Laigle, D., Liebault, F., Degetto, M., & Tiranti, D. (2012). Forecast System Guidelines Debris Flows. Guidelines for the Implementation of Forecast System Against Debris Flow Hazard (WP6), Ver 1. 24.12. 2012, Project PARAmountimProved Accessibility: Reliability and Security of Alpine Transport Infrastructure Related to Mountainous Hazards in a Changing Climate, Alp. Space. Eur. Reg. Dev. Fund, Brussels.
[8] Papa, M., Egashira, S., & Itoh, T. (2004). Critical conditions of bed sediment entrainment due to debris flow. Natural Hazards and Earth System Sciences, 4(3), 469-474.
[9] Cao, Z., Pender, G., Wallis, S., & Carling, P. (2004). Computational dam-break hydraulics over erodible sediment bed. Journal of hydraulic engineering, 130(7), 689-703.
[10] Pirulli, M., & Pastor, M. (2012). Numerical study on the entrainment of bed material into rapid landslides. Geotechnique, 62(11), 959.
[11] McCoy, S. W., Kean, J. W., Coe, J. A., Tucker, G. E., Staley, D. M., & Wasklewicz, T. A. (2012). Sediment entrainment by debris flows: In situ measurements from the headwaters of a steep catchment. Journal of Geophysical Research: Earth Surface, 117(F3).
[12] Song, C. G., & Lee, S. O. (2014). Hydraulic Characteristics of Dam Break Flow by Flow Resistance Stresses and Initial Depths. Journal of Korea Water Resources Association, 47(11), 1077-1086.
[13] O’Brien, J. S. (2007). FLO-2D user manual. Nutrioso, Arizona
[14] Hungr, O., McDougall, S., & Bovis, M. (2005). Entrainment of material by debris flows. In Debris-flow hazards and related phenomena (pp. 135-158). Springer, Berlin, Heidelberg..
[15] Song, C. G., Ku, T. G., Kim, Y. D., & Park, Y. S. (2017). Floodplain Stability Indices for Sustainable Waterfront Development by Spatial Identification of Erosion and Deposition. Sustainability, 9(5), 735.
[16] McDougall, S., & Hungr, O. (2005). Dynamic modelling of entrainment in rapid landslides. Canadian Geotechnical Journal, 42(5), 1437-1448.
[17] Iverson, R. M., Logan, M., LaHusen, R. G., & Berti, M. (2010). The perfect debris flow? Aggregated results from 28 largeâ€scale experiments. Journal of Geophysical Research: Earth Surface, 115(F3).
[18] Reid, M. E., Iverson, R. M., Logan, M, LaHusen, R. G., Godt, J. W., & Griswold, J. P. (2011). Entrainment of bed sediment by debris flows: results from large-scale experiments. In Fifth International Conference on Debris-flow Hazards Mitigation, Mechanics, Prediction and Assessment, pp. 367-374.
[19] Iverson, R. M. (2012). Elementary theory of bedâ€sediment entrainment by debris flows and avalanches. Journal of Geophysical Research: Earth Surface, 117(F3).
[20] Iverson, R. M., Reid, M. E., Logan, M., LaHusen, R. G., Godt, J. W., & Griswold, J. P. (2011). Positive feedback and momentum growth during debris-flow entrainment of wet bed sediment. Nature Geoscience, 4(2), 116.
[21] Mcdougall, S. (2006). A new continuum dynamic model for the analysis of extremely rapid landslide motion across complex 3D terrain. (PhD Thesis). University of British Columbia, Vancouver, USA.
[22] Lee, J. S. (2016) Behavior of debris flow about entrainment using numerical model. (Master Thesis). Hongik University, Seoul, Korea.
[23] Lee, J. S.; Song, C. G.; Lee, S. O. (2015), Analysis of Characteristic of Debris Flow with Angle of Slope, Journal of the Korean Society of Safety, 31(2), 49-56.
-
Downloads
-
How to Cite
Jeong, S., Lee, J., Geun Song, C., & Oh Lee, S. (2018). Propagation Characteristics of Debris Flows Considering Entrainment Effect. International Journal of Engineering & Technology, 7(3.34), 122-128. https://doi.org/10.14419/ijet.v7i3.34.18787Received date: 2018-09-02
Accepted date: 2018-09-02
Published date: 2018-09-01