Study of Kinetic Modelling of Syngas Production Over Plasma Gasification

Authors

  • Supriyanto .
  • . .

DOI:

https://doi.org/10.14419/ijet.v7i3.7.18886

Keywords:

Kinetic Modelling, Pre-exponential Factor, Plasma Gasification, Syngas

Abstract

Plasma gasification is able to produce syngas from several feedstock e.g. sawdust, pellet, plastic and oil but there is lack of knowledge in this process through kinetic modelling. To have better understanding this study determines parameters kinetic modelling due to changes of temperature and conversion. The method uses the stoichiometry chemical reaction, material balance, energy balance, and numerical solution   to calculate parameters of kinetic modelling. The result of simulation gets pre-exponential factor 9.78 to 13.1 for sawdust, pellet, and plastic with temperature 1200-1500oC and conversion 99%. Meanwhile oil need a higher temperature 1600oC to achieve similar conversion and it indicate a higher pre-exponential factor 67.6 than other feedstock.

 

References

[1] Pelucchi M, Somers KP, Yasunaga K, et al. An experimental and kinetic modeling study of the pyrolysis and oxidation of n-C3C5 aldehydes in shock tubes. Combust Flame. 2015;162(2):265-286. doi:10.1016/j.combustflame.2014.07.027.

[2] Sikarwar VS, Zhao M, Clough P, et al. An overview of advances in biomass gasification. Energy Environ Sci. 2016;9(10):2939-2977. doi:10.1039/C6EE00935B.

[3] Ng RTL, Tay DHS, Wan Ab Karim Ghani WA, Ng DKS. Modelling and optimisation of biomass fluidised bed gasifier. Appl Therm Eng. 2013;61(1):98-105. doi:10.1016/j.applthermaleng.2013.03.048.

[4] Arena U. Process and technological aspects of municipal solid waste gasification. A review. Waste Manag. 2012;32(4):625-639. doi:10.1016/j.wasman.2011.09.025.

[5] Cho IJ, Park HW, Park DW, Choi S. Enhancement of synthesis gas production using gasification-plasma hybrid system. Int J Hydrogen Energy. 2015;40(4):1709-1716. doi:10.1016/j.ijhydene.2014.12.007.

[6]

Molino A, Chianese S, Musmarra D. Biomass gasification technology: The state of the art overview. J Energy Chem. 2016;25(1):10-25. doi:10.1016/j.jechem.2015.11.005.

[7] Dai J, Saayman J, Grace JR, Ellis N. Gasification of Woody Biomass. Annu Rev Chem Biomol Eng. 2015;6(1):77-99. doi:10.1146/annurev-chembioeng-061114-123310.

[8] Hlina M, Hrabovsky M, Kavka T, Konrad M. Production of high quality syngas from argon/water plasma gasification of biomass and waste. Waste Manag. 2014;34(1):63-66. doi:10.1016/j.wasman.2013.09.018.

[9] Zhang Q, Dor L, Fenigshtein D, Yang W, Blasiak W. Gasification of municipal solid waste in the Plasma Gasification Melting process. Appl Energy. 2012;90(1):106-112. doi:10.1016/j.apenergy.2011.01.041.

[10] Tang L, Huang H, Hao H, Zhao K. Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal. J Electrostat. 2013;71(5):839-847. doi:10.1016/j.elstat.2013.06.007.

[11] Tavares JR, Rao L, Derboghossian C, et al. Large-scale plasma waste gasification. IEEE Trans Plasma Sci. 2011;39(11 PART 1):2908-2909. doi:10.1109/TPS.2011.2138723.

[12] Zhang Q, Dor L, Zhang L, Yang W, Blasiak W. Performance analysis of municipal solid waste gasification with steam in a Plasma Gasification Melting reactor. Appl Energy. 2012;98:219-229. doi:10.1016/j.apenergy.2012.03.028.

[13] Janajreh I, Raza SS, Valmundsson AS. Plasma gasification process: Modeling, simulation and comparison with conventional air gasification. Energy Convers Manag. 2013;65:801-809. doi:10.1016/j.enconman.2012.03.010.

[14] Zhang Q, Dor L, Biswas AK, Yang W, Blasiak W. Modeling of steam plasma gasification for municipal solid waste. Fuel Process Technol. 2013;106:546-554. doi:10.1016/j.fuproc.2012.09.026.

[15] Ibrahimoglu B, Cucen A, Yilmazoglu MZ. Numerical modeling of a downdraft plasma gasification reactor. International Journal of Hydrogen Energy. 2016.

[16] Mountouris A, Voutsas E, Tassios D. Solid waste plasma gasification: Equilibrium model development and exergy analysis. Energy Convers Manag. 2006;47(13-14):1723-1737. doi:10.1016/j.enconman.2005.10.015.

[17] Slavinskaya NA, Riedel U, Messerle VE, Ustimenko AB. Chemical kinetic modeling in coal gasification processes: An overview. Eurasian Chem J. 2013;15(1):1-18. doi:10.1115/GT2010-23362.

[18] Kutta C. Runge-Kutta Method. Hp 98821a. 2006;2:3-7. doi:10.2514/5.9781600861307.0319.0320.

[19] Green, D.W., Perry, R.H. 2008. Perry’s Chemical Engineers’ Handbook 8th Edition. Mc-Graw-Hill.

[20] Chen Z, Zhu Q, Wang X, Xiao B, Liu S. Pyrolysis behaviors and kinetic studies on Eucalyptus residues using thermogravimetric analysis. Energy Convers Manag. 2015;105:251-259. doi:10.1016/j.enconman.2015.07.077.

View Full Article:

How to Cite

., S., & ., . (2018). Study of Kinetic Modelling of Syngas Production Over Plasma Gasification. International Journal of Engineering & Technology, 7(3.7), 391–393. https://doi.org/10.14419/ijet.v7i3.7.18886
Received 2018-09-03
Accepted 2018-09-03