Design and Manufacturing of Fixture for Edge Prepration of Elbows

  • Authors

    • Nagasankar P
    • Tamilselvi P
    • Babu T V B
    • Jasim Salahudin S
    • Aravindhan S
    • Deepak J
    2018-09-01
    https://doi.org/10.14419/ijet.v7i3.34.19221
  • Edge preparation, Fixtures, Manual handling, Welding, Manufacturing

  • Abstract

    This paper is a description of an alternative fixture for the edge preparation of elbows and pipes before welding. The welding will not penetrate the cross section of the pipe if the thickness of the pipes is more than eight millimeter, so edge preparation is done before welding. Fixtures are used to hold the pipes during the process of edge preparation. This paper deals with two major issues from the design of previous fixtures.

    Requirement of manual handling of the part.

    Precise rotations are not possible.

     The fixtures being used currently require more setting up time and they require manual handling to machine the other side. This paper describes a fixture which can reduce manual handling and be able to rotate the elbow either manually or using a motor.

     

     

  • References

    1. [1] Serdar Karaoglu and Abdullah SecginSensitivity Analysis of Submerged Arc Welding Process Parameters’ Journal of Material Processing Technology 202, (2008).500-507.

      [2] Anand Ragu and ShreyesAnalysis of The effects Of Fixture Clamping Sequence on Part Location Errors’ International Journal of Machine Tools And Manufacturing 44 (2003) 373-382.

      [3] J.H.Yeh and F.W.Liou ‘Contact Condition Modelling For Machining Fixture Setup Processes’ International Journal Of Machine Tools and Manufacture 39, (1998) 787–803.

      [4] V.Vara Prasad and D.Lingaraju ‘Effect Of Different Edge PreparationOn The Tensile And Hardness Properties Of Gtaw Welded 6082 Aluminum Alloy ’ Materials Today: Proceedings 4, (2016) 157-165. [5] L.Fratini ,Micari and G.Buffa ‘New Fixture For Fsw processes of titanium Alloys’ Cirp Annals - Manufacturing Technology. 59(2010) 271-274 .[6] XuchenHongsheng ‘A Comparison Between Fracture Toughness at Different Locations of Longitudinal Submerged Arc Welded and Spiral Submerged Arc Welded Joints of API X80 Pipeline Steels –Engineering Fracture Machine’. 148(2015) 110-121.

      [7] D.V. Kiran, D.W. Choa, W.H. Songb, S.J. Naa ‘Arc Behaviour In Two Wire Tandem Submerged Arc Welding’ Journal of Materials Processing Technology. 214 (2014) 1546–1556.

      [8] DegalaVerkathKiran ‘Arc Interaction and Molten Pool Behaviour in The Three Wire Submerged Arc Welding Process’ International Journal of Heat and Mass Transfer 87 (2015) 327-340.

      [9] Ke Li, Zhisheng Wu, Yanjun Zhu, CuirongLiu ‘Analysis of Metal Transfer in Submerged Welding Arc’Journal of Materials Processing Technology. (2017)

      [10] L. Fratini ,F. Micari , G. Buffa, V.F. Ruisi ‘New fixture for FSW processes of titanium alloys CIRP Annals’ - Manufacturing Technology 59 (2010) 271–274.

      [11] M.A. Mannan,J. P. Sollie ‘A force –controlled clamping element for intelligent fixturing’ International journal of machine tools and manufacturing. (1997)

      [12] E. Uhlmann, D. Oberschmidt Y. Kuch A. Löwenstein I. Winker ‘Effects of different cutting edge preparation methods on micro milling performance’. (2016)

      [13] Jan C. Aurich , Christian Effgen, Benjamin Kirsch et.al Cutting edge preparation with elastic bonded super abrasive grinding wheels, (2016)

      [14] Alimkina a , Yu. P. Astakhov a , A. V. Baraev a , Yu. M. Dolzhanskii a & S. A. Kochergin. ‘Effect of the method of edge preparation on the mechanical properties of laser welded joints in thin wall titanium shells.

  • Downloads

  • How to Cite

    P, N., P, T., T V B, B., Salahudin S, J., S, A., & J, D. (2018). Design and Manufacturing of Fixture for Edge Prepration of Elbows. International Journal of Engineering & Technology, 7(3.34), 339-344. https://doi.org/10.14419/ijet.v7i3.34.19221

    Received date: 2018-09-07

    Accepted date: 2018-09-07

    Published date: 2018-09-01