Utilization manufactured sand as fine aggregate for concrete quality

  • Authors

    • Ranti Hidayawanti
    • Supriadi Legino
    • Iriansyah Sangadji
    https://doi.org/10.14419/ijet.v7i3.29.19316
  • M-Sand, Fine Aggregate, Waste, Compressive Strength, Concrete Quality.

  • Abstract

    Utilization Manufactured sand (M-sand) in this case of ash sandstone wash as a substitute for sand on concrete mixture is used as a result of the crisis in availability of the main material of concrete, ie natural materials such as sand used in concrete manufacture foundries. M-sand from the production of crushed stone then collected and washed which will be used as a mixture of sand on the concrete. The results of m-sand optimally utilized for the mixture of fine agregate substitution of concrete with compressive strength test to produce high quality of concrete. The mixture used is 50% m-sand and FA, from the results of the compressive strength test showed the utilization of m-sand can be used as a quality concrete

     

     

  • References

    1. [1] W. Shen et al., “Mixing design and microstructure of ultra-high strength concrete with manufactured sand,†Constr. Build. Mater. vol. 143, pp. 312–321, 2017.

      [2] R. Hidayawanti, S. Legino, and D. Harjanto, “OPTIMIZING THE UTILIZATION CEMENT SLAG AND FLY ASH OF,†no. March, pp. 14–18, 2018.

      [3] W. Shen et al., “Influence of manufactured sand’s characteristics on its concrete performance,†Constr. Build. Mater. vol. 172, pp. 574–583, 2018.

      [4] R. Siddique, G. de Schutter, and A. Noumowe, “Effect of used-foundry sand on the mechanical properties of concrete,†Constr. Build. Mater. vol. 23, no. 2, pp. 976–980, 2009.

      [5] R. Siddique and G. Singh, “Utilization of waste foundry sand (WFS) in concrete manufacturing,†Resour. Conserv. Recycl. vol. 55, no. 11, pp. 885–892, 2011.

      [6] P. Nanthagopalan and M. Santhanam, “Fresh and hardened properties of self-compacting concrete produced with manufactured sand,†Cem. Concr. Compos. vol. 33, no. 3, pp. 353–358, 2011.

      [7] R. N. U. Shanmugapriya T., “Optimization of Partial Replacement of M-Sand by Natural Sand in High Performance Concrete with Silica Fume,†Int. J. Eng. Sci. Emerg. Technol., vol. 2, no. July, pp. 73–80, 2012.

      [8] M. Padmanabhan and P. H. Paulose, “Behaviour of Concrete Made by Partially Replacing Fine Aggregate with Foundry Sand and Quarry Dust,†pp. 3279–3282, 2018.

      [9] M. Popek and Å. Sadowski, “Effect of selected mineral admixtures on mechanical properties of concrete,†Key Eng. Mater., vol. 728, 2017.

      [10] R. Siddique, G. Singh, and M. Singh, “Recycle option for metallurgical by-product (Spent Foundry Sand) in green concrete for sustainable construction,†J. Clean. Prod., vol. 172, pp. 1111–1120, 2018.

      [11] J. A. Mary, “An Experimental Investigation on Stone Dust as Partial Replacement of Fine Aggregate in Concrete,†vol. 3, no. 5, pp. 229–232, 2014.

      [12] K. Praveen Kumar and Radhakrishna, “Characteristics of SCC with Fly Ash and Manufactured Sand,†IOP Conf. Ser. Mater. Sci. Eng., vol. 149, no. 1, p. 012111, Sep. 2016.

  • Downloads

  • How to Cite

    Hidayawanti, R., Legino, S., & Sangadji, I. (2018). Utilization manufactured sand as fine aggregate for concrete quality. International Journal of Engineering & Technology, 7(3.29), 577-579. https://doi.org/10.14419/ijet.v7i3.29.19316

    Received date: 2018-09-09

    Accepted date: 2018-09-09