A Study on Adsorption Capacity of Activated Carbons through Analysis of Variance (Anova)
-
2018-09-01 https://doi.org/10.14419/ijet.v7i3.34.19357 -
adsorption, carbon, dosage, dye, sludge. -
Abstract
Recycling and reusing the waste is one of the agenda of sustainable development. Hence this investigation was carried out on utilizing the industrial sludge as activated carbon. The sludge was collected from treatment unit of sugar mill industry, paper mill industry and tannery industry and activated carbon was prepared and named as sugar mill sludge activated carbon (SSAC), paper mill sludge activated carbon (PSAC) and tannery industry sludge activated carbon (TSAC). Batch studies were performed between dye solution and activated carbon to determine adsorption capacity of adsorbent and optimum contact time for the contact process. The optimum contact time and optimum dosage was found to be 120 min and 3.0 g respectively. The maximum adsorption capacity of SSAC, PSAC & TSAC on the concentrations of 10 mg/l of reactive dye solution for the dosage of 3.0 g was 100 %, 92.88 % and 88.54 %. The experimental data and analysis was checked by ANOVA table analysis to justify mathematically. As per ANOVA table the mean performance of SSAC is higher and TSAC is lower. So, finally it is concluded that the experimental results are justified by the ANOVA table analysis on the adsorption capacity of activated carbons.Â
Â
Â
-
References
[1] Ashish S. Sartape, Aniruddha M. Mandhare, Vikas V. Jadhav, Prakash D. Raut, Mansing A. Anuse, Sanjay S. Kolekar, Removal of malachite green dye from aqueous solution with adsorption technique using Limonia acidissima (wood apple) shell as low cost adsorbent (2017), Arabian Journal of Chemistry 10, S 3229–S 3238.
[2] Sushmita Banerjee, M.C. Chattopadhyaya, Adsorption characteristics for the removal of a toxic dye, tartrazine from aqueous solutions by a low cost agricultural by-product (2017), Arabian Journal of Chemistry, 10, S1629–S1638.
[3] Neha Gupta, Atul K. Kushwaha, M.C. Chattopadhyaya, Application of potato (Solanum tuberosum) plant wastes for the removal of methylene blue and malachite green dye from aqueous solution (2016), Arabian Journal of Chemistry, 9, S 707–S 716.
[4] Deepak Pathania, Shikha Sharma, Pardeep Singh, Removal of methylene blue by adsorption onto activated carbon developed from Ficus carica bast (2017), Arabian Journal of Chemistry 10, S 1445–S 1451.
[5] Aseel M. Aljeboree, Abbas N. Alshirifi, Ayad F. Alkaim. Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbon (2017), Arabian Journal of Chemistry, 10, S3381–S3393.
[6] Sushmita Banerjee, M.C. Chattopadhyaya, Adsorption characteristics for the removal of a toxic dye, tartrazine from aqueous solutions by a low cost agricultural by-product (2017)
[7] Arabian Journal of Chemistry, 10, S1629 S1638.
[8] Warda Hassan a, Umar Farooq, Muhammad Ahmad, Makshoof Athar, Misbahul Ain Khan.
[9] Potential biosorbent, Haloxylon recurvum plant stems, for the removal of methylene blue dye 2017, Arabian Journal of Chemistry, 10, S1512–S1522.
[10] Fazal Wahid, Imdad Ullah Mohammadzai, Adnan Khan, Ziarat Shah, Waseem Hassan, Nauman Ali, Removal of toxic metals with activated carbon prepared from Salvadora persica 2017, Arabian Journal of Chemistry, 10, S2205–S2212.
[11] Bruno Kostura, Preparation of sorbent with a high active sorption surface based blast furnace slag for phosphate removal from waste water, Journal of Environment Protection Engineering, 2017, 43, (1) 161-168.
[12] Chamargore, J.J., J.V. Bharad, B.R. Madje and M.B. Ubale: The removal of dye from aqueous solution by adsorption on low cost adsorbents, (2010), E-J. Chemistry, 7(3), 1003-1007.
[13] Bulut, Y. and H. Aydin: A Kinetics and thermodynamics study of methylene blue adsorption on wheat shells, (2006), Desalination, 194, 259-267 (2006).
-
Downloads
-
How to Cite
Govindasami, S., Sivakumar, D., & B Sakthivel, P. (2018). A Study on Adsorption Capacity of Activated Carbons through Analysis of Variance (Anova). International Journal of Engineering & Technology, 7(3.34), 449-451. https://doi.org/10.14419/ijet.v7i3.34.19357Received date: 2018-09-09
Accepted date: 2018-09-09
Published date: 2018-09-01