Conditions for the Formation of Wear-Resistant Structures When Strengthening the Surface Layers of Parts

  • Authors

    • Oleg Cherneta
    • Vadim Kubich
    • Roman Voloshchuk
    • Alexander Sasov
    • Yuriy Korzhavin
    • . .
    2018-09-15
    https://doi.org/10.14419/ijet.v7i4.3.19555
  • laser treatment, microhardness, structural materials, technologies, Ð¥-ray reseach.

  • In the given article special attention is paid to the transformation of the structure of average carbon steels, depending on technological methods of strengthening, the identification of factors influencing the emergence of high-strength structures.  With the help of microstructural, X - ray phase studies, microhardness measurements of certain layers, the main technological parameters and modes of reinforcing workings have been identified, new and innovative combined technologies have been proposed. Based on the analysis of a number of existing technological methods of strengthening the surface layer of structural materials, the dynamics of transformation of their microstructures was researched.  After laser treatment, due to the ultra-high velocity of cooling of crystallized volumes, due to intensive heat removal through the main volume of samples on the surface, a light zone, which is not digestible, is identified and is identified as "structurally martensitic" - gardenain, which is  a kind of classical martensite. Based on the analysis of a number of existing technological methods of strengthening the surface layer of structural materials, the dynamics of transformation of their microstructures was researched.   

     

     

  • References

    1. [1] A.G. Suslov, Y.V. Gulyayev, A.M. Dalsky and others, Quality of machines, Handbook. T2 M. Mechanical Engineering (1995), pp: 43-58.

      [2] I.V, Fransenyuk, L.I. Fransеnuk, Album of microstructures of cast iron, steel, non-ferrous metals and their alloys, -M.: ICC "Akademkniga", (2004), pp: 135-138.

      [3] L.S. Malinov, “Differential treatment of alloys to enhance their properties is a promising direction in material scienceâ€, New materials and technologies in metallurgy and mechanical engineering, Scientific journal No.2, (2012), pp: 50-56.

      [4] J.M. Poate, G. Foti, D.C. Jacobson, Surface modification and alloying by laser, ion, and electron beams, M. Mechanical Engineering, (1987), рр: 301-302.

      [5] Hu W.W., Herman H., Clayton C.R, Ion Implatation Metallurgy, ed. G.M. Preece and J.K. Hirvonen New York: TSM-AIME, (1980), рр: 100-102.

      [6] O.G. Cherneta, R.G. Voloshchuk, A.N. Korobochka “Research of technological methods of formation of wear-resistant coatings on the basis of laser treatmentâ€, Collection of scientific works "Perspective Technologies and Devices", city Lutsk November 2014 - Lutsk: LNTU, - Vol.5 (2), (2014), pp: 171-176.

      [7] ASTM Card File (Diffraction Date Card and Alphabetscal and Grouped Numerical Index of X-Ray Diffraction Date) -Philadelphia; E d. By ASTM, (1969).

      [8] A.S. Zavyalov, G.N.Teplukhin, K.V. Gabayev, Conditions and mechanism of formation of unstructured martensite (gardenite), Metallurgy and thermal processing of metals, No.10, (1979), pp: 11-12.

      [9] V.K. Grigorievich, Hardness of the hardness of metals, -M.: Science, (1976), pp: 230-232.

      [10] O.G. Cherneta, I.O. Babko, Y.V. Chaldyshev, “Research of technological methods of formation of wear-resistant coatings on the basis of laser treatmentâ€, Collection of scientific works "Perspective Technologies and Devices", Vol.5 (2), (2014) pp: 176-179.

      [11] O.G. Cherneta, V.I. Sukhomlin, R.G. Voloshchuk, B.P. Sereda, “Investigation of microstructure of worn parts of automobiles made of steel 45 when restored and repeated thermal treatmentâ€, Perspective technologies and devices. Lutsk / June 2017 - LNTU, - Vol.10 (1), (2017), pp: 212-217.

      [12] O.G. Devoyo, Technology of forming wear-resistant surfaces by laser doping, Minsk: UP "Tehnologiya", (2001), pp: 80-87.

      [13] B.P. Sereda, N.E. Kalinina, I.V. Kruglyak, Surface reinforcement materials, Monograph, Zaporozhye: Publishing house of Zaporizhzhya State Engineering Academy, (2004), pp: 230.

      [14] O.G. Cherneta, V.I. Sukhomlin, A.N. Korobochka, “Research of the microstructure of worn parts of automobiles made of steel 45 when restored and repeated thermal treatmentâ€, Perspective technologies and devices, Vol.10 (1), (2017), pp: 222-217.

  • Downloads

  • How to Cite

    Cherneta, O., Kubich, V., Voloshchuk, R., Sasov, A., Korzhavin, Y., & ., . (2018). Conditions for the Formation of Wear-Resistant Structures When Strengthening the Surface Layers of Parts. International Journal of Engineering & Technology, 7(4.3), 76-80. https://doi.org/10.14419/ijet.v7i4.3.19555